ZJ noise
10-31-2006, 01:19 PM
#1
Guest
Posts: n/a
ZJ noise
I have a 95 Grand Cherokee w/ 318 and quadra trac that until recently
was driving great. recently it developed a noise in the upper engine
area and I nailed it down to the Idler pully between the alternator and
a/c compressor. I replaced it and the noise sort of went away, the
grinding screech of the bearing in that pulley went away but there is
still this chirping sount that only is heard when the vehicle is in
motion, the chirping will increase in speed with the engine rpm but
disappears when the jeep is not moving, it almost is timed with the
wheels rotating but as I have said will speed up with the engine when
the throttle is opened. anyone have any ideas?
was driving great. recently it developed a noise in the upper engine
area and I nailed it down to the Idler pully between the alternator and
a/c compressor. I replaced it and the noise sort of went away, the
grinding screech of the bearing in that pulley went away but there is
still this chirping sount that only is heard when the vehicle is in
motion, the chirping will increase in speed with the engine rpm but
disappears when the jeep is not moving, it almost is timed with the
wheels rotating but as I have said will speed up with the engine when
the throttle is opened. anyone have any ideas?
10-31-2006, 02:39 PM
#2
Guest
Posts: n/a
Re: ZJ noise
Did you install a new belt?
<Kodiax@gmail.com> wrote in message
news:1162318779.854145.297690@h48g2000cwc.googlegr oups.com...
>I have a 95 Grand Cherokee w/ 318 and quadra trac that until recently
> was driving great. recently it developed a noise in the upper engine
> area and I nailed it down to the Idler pully between the alternator and
> a/c compressor. I replaced it and the noise sort of went away, the
> grinding screech of the bearing in that pulley went away but there is
> still this chirping sount that only is heard when the vehicle is in
> motion, the chirping will increase in speed with the engine rpm but
> disappears when the jeep is not moving, it almost is timed with the
> wheels rotating but as I have said will speed up with the engine when
> the throttle is opened. anyone have any ideas?
>
<Kodiax@gmail.com> wrote in message
news:1162318779.854145.297690@h48g2000cwc.googlegr oups.com...
>I have a 95 Grand Cherokee w/ 318 and quadra trac that until recently
> was driving great. recently it developed a noise in the upper engine
> area and I nailed it down to the Idler pully between the alternator and
> a/c compressor. I replaced it and the noise sort of went away, the
> grinding screech of the bearing in that pulley went away but there is
> still this chirping sount that only is heard when the vehicle is in
> motion, the chirping will increase in speed with the engine rpm but
> disappears when the jeep is not moving, it almost is timed with the
> wheels rotating but as I have said will speed up with the engine when
> the throttle is opened. anyone have any ideas?
>
10-31-2006, 02:39 PM
#3
Guest
Posts: n/a
Re: ZJ noise
Did you install a new belt?
<Kodiax@gmail.com> wrote in message
news:1162318779.854145.297690@h48g2000cwc.googlegr oups.com...
>I have a 95 Grand Cherokee w/ 318 and quadra trac that until recently
> was driving great. recently it developed a noise in the upper engine
> area and I nailed it down to the Idler pully between the alternator and
> a/c compressor. I replaced it and the noise sort of went away, the
> grinding screech of the bearing in that pulley went away but there is
> still this chirping sount that only is heard when the vehicle is in
> motion, the chirping will increase in speed with the engine rpm but
> disappears when the jeep is not moving, it almost is timed with the
> wheels rotating but as I have said will speed up with the engine when
> the throttle is opened. anyone have any ideas?
>
<Kodiax@gmail.com> wrote in message
news:1162318779.854145.297690@h48g2000cwc.googlegr oups.com...
>I have a 95 Grand Cherokee w/ 318 and quadra trac that until recently
> was driving great. recently it developed a noise in the upper engine
> area and I nailed it down to the Idler pully between the alternator and
> a/c compressor. I replaced it and the noise sort of went away, the
> grinding screech of the bearing in that pulley went away but there is
> still this chirping sount that only is heard when the vehicle is in
> motion, the chirping will increase in speed with the engine rpm but
> disappears when the jeep is not moving, it almost is timed with the
> wheels rotating but as I have said will speed up with the engine when
> the throttle is opened. anyone have any ideas?
>
10-31-2006, 02:39 PM
#4
Guest
Posts: n/a
Re: ZJ noise
Did you install a new belt?
<Kodiax@gmail.com> wrote in message
news:1162318779.854145.297690@h48g2000cwc.googlegr oups.com...
>I have a 95 Grand Cherokee w/ 318 and quadra trac that until recently
> was driving great. recently it developed a noise in the upper engine
> area and I nailed it down to the Idler pully between the alternator and
> a/c compressor. I replaced it and the noise sort of went away, the
> grinding screech of the bearing in that pulley went away but there is
> still this chirping sount that only is heard when the vehicle is in
> motion, the chirping will increase in speed with the engine rpm but
> disappears when the jeep is not moving, it almost is timed with the
> wheels rotating but as I have said will speed up with the engine when
> the throttle is opened. anyone have any ideas?
>
<Kodiax@gmail.com> wrote in message
news:1162318779.854145.297690@h48g2000cwc.googlegr oups.com...
>I have a 95 Grand Cherokee w/ 318 and quadra trac that until recently
> was driving great. recently it developed a noise in the upper engine
> area and I nailed it down to the Idler pully between the alternator and
> a/c compressor. I replaced it and the noise sort of went away, the
> grinding screech of the bearing in that pulley went away but there is
> still this chirping sount that only is heard when the vehicle is in
> motion, the chirping will increase in speed with the engine rpm but
> disappears when the jeep is not moving, it almost is timed with the
> wheels rotating but as I have said will speed up with the engine when
> the throttle is opened. anyone have any ideas?
>
10-31-2006, 07:20 PM
#5
Guest
Posts: n/a
Re: ZJ noise
Universal Joints.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
10-31-2006, 07:20 PM
#6
Guest
Posts: n/a
Re: ZJ noise
Universal Joints.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
10-31-2006, 07:20 PM
#7
Guest
Posts: n/a
Re: ZJ noise
Universal Joints.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
11-01-2006, 01:00 PM
#8
Guest
Posts: n/a
Re: ZJ noise
On Oct 31, 12:39 pm, "billy ray" <billy_...@SPAMfuse.net> wrote:
> Did you install a new belt?
>
the belt does not yet need replacement. its not new but its not old
ether. if it were the belt this noise would still be happening while
parked.
11-01-2006, 01:00 PM
#9
Guest
Posts: n/a
Re: ZJ noise
On Oct 31, 12:39 pm, "billy ray" <billy_...@SPAMfuse.net> wrote:
> Did you install a new belt?
>
the belt does not yet need replacement. its not new but its not old
ether. if it were the belt this noise would still be happening while
parked.
11-01-2006, 01:00 PM
#10
Guest
Posts: n/a
Re: ZJ noise
On Oct 31, 12:39 pm, "billy ray" <billy_...@SPAMfuse.net> wrote:
> Did you install a new belt?
>
the belt does not yet need replacement. its not new but its not old
ether. if it were the belt this noise would still be happening while
parked.
