YJ stuck in gear
#51
Guest
Posts: n/a
Re: YJ stuck in gear
I am over it!
Jeep for sale....$ 1800
Lifter tick and stuck in second gear :(
I took the boot off, it had a plate with 3 screws holding in a ring that
wont budge. Under the ring is a thin washer with some cut outs. The trans,
splits in half left to right.
I want my 1952 M38 back!!
Les
Jeep for sale....$ 1800
Lifter tick and stuck in second gear :(
I took the boot off, it had a plate with 3 screws holding in a ring that
wont budge. Under the ring is a thin washer with some cut outs. The trans,
splits in half left to right.
I want my 1952 M38 back!!
Les
#52
Guest
Posts: n/a
Re: YJ stuck in gear
I am over it!
Jeep for sale....$ 1800
Lifter tick and stuck in second gear :(
I took the boot off, it had a plate with 3 screws holding in a ring that
wont budge. Under the ring is a thin washer with some cut outs. The trans,
splits in half left to right.
I want my 1952 M38 back!!
Les
Jeep for sale....$ 1800
Lifter tick and stuck in second gear :(
I took the boot off, it had a plate with 3 screws holding in a ring that
wont budge. Under the ring is a thin washer with some cut outs. The trans,
splits in half left to right.
I want my 1952 M38 back!!
Les
#53
Guest
Posts: n/a
Re: YJ stuck in gear
I am over it!
Jeep for sale....$ 1800
Lifter tick and stuck in second gear :(
I took the boot off, it had a plate with 3 screws holding in a ring that
wont budge. Under the ring is a thin washer with some cut outs. The trans,
splits in half left to right.
I want my 1952 M38 back!!
Les
Jeep for sale....$ 1800
Lifter tick and stuck in second gear :(
I took the boot off, it had a plate with 3 screws holding in a ring that
wont budge. Under the ring is a thin washer with some cut outs. The trans,
splits in half left to right.
I want my 1952 M38 back!!
Les
#54
Guest
Posts: n/a
Re: YJ stuck in gear
Side to side split is a Peugot tranny. Parts manual shows several
different versions of how the lever comes out, depends on the tranny
serial number. On mine, you need to get under the first bushing you come
to, you need to unscrew the 3 bolts that bolt into the tranny top to get
the lever freed up. Sounds like yours may be the version with a snap
ring under the first bushing.
Les@firemountain.uranium wrote:
> I am over it!
> Jeep for sale....$ 1800
> Lifter tick and stuck in second gear :(
>
> I took the boot off, it had a plate with 3 screws holding in a ring that
> wont budge. Under the ring is a thin washer with some cut outs. The trans,
> splits in half left to right.
>
> I want my 1952 M38 back!!
>
> Les
different versions of how the lever comes out, depends on the tranny
serial number. On mine, you need to get under the first bushing you come
to, you need to unscrew the 3 bolts that bolt into the tranny top to get
the lever freed up. Sounds like yours may be the version with a snap
ring under the first bushing.
Les@firemountain.uranium wrote:
> I am over it!
> Jeep for sale....$ 1800
> Lifter tick and stuck in second gear :(
>
> I took the boot off, it had a plate with 3 screws holding in a ring that
> wont budge. Under the ring is a thin washer with some cut outs. The trans,
> splits in half left to right.
>
> I want my 1952 M38 back!!
>
> Les
#55
Guest
Posts: n/a
Re: YJ stuck in gear
Side to side split is a Peugot tranny. Parts manual shows several
different versions of how the lever comes out, depends on the tranny
serial number. On mine, you need to get under the first bushing you come
to, you need to unscrew the 3 bolts that bolt into the tranny top to get
the lever freed up. Sounds like yours may be the version with a snap
ring under the first bushing.
Les@firemountain.uranium wrote:
> I am over it!
> Jeep for sale....$ 1800
> Lifter tick and stuck in second gear :(
>
> I took the boot off, it had a plate with 3 screws holding in a ring that
> wont budge. Under the ring is a thin washer with some cut outs. The trans,
> splits in half left to right.
>
> I want my 1952 M38 back!!
>
> Les
different versions of how the lever comes out, depends on the tranny
serial number. On mine, you need to get under the first bushing you come
to, you need to unscrew the 3 bolts that bolt into the tranny top to get
the lever freed up. Sounds like yours may be the version with a snap
ring under the first bushing.
Les@firemountain.uranium wrote:
> I am over it!
> Jeep for sale....$ 1800
> Lifter tick and stuck in second gear :(
>
> I took the boot off, it had a plate with 3 screws holding in a ring that
> wont budge. Under the ring is a thin washer with some cut outs. The trans,
> splits in half left to right.
>
> I want my 1952 M38 back!!
>
> Les
#56
Guest
Posts: n/a
Re: YJ stuck in gear
Side to side split is a Peugot tranny. Parts manual shows several
different versions of how the lever comes out, depends on the tranny
serial number. On mine, you need to get under the first bushing you come
to, you need to unscrew the 3 bolts that bolt into the tranny top to get
the lever freed up. Sounds like yours may be the version with a snap
ring under the first bushing.
Les@firemountain.uranium wrote:
> I am over it!
> Jeep for sale....$ 1800
> Lifter tick and stuck in second gear :(
>
> I took the boot off, it had a plate with 3 screws holding in a ring that
> wont budge. Under the ring is a thin washer with some cut outs. The trans,
> splits in half left to right.
>
> I want my 1952 M38 back!!
>
> Les
different versions of how the lever comes out, depends on the tranny
serial number. On mine, you need to get under the first bushing you come
to, you need to unscrew the 3 bolts that bolt into the tranny top to get
the lever freed up. Sounds like yours may be the version with a snap
ring under the first bushing.
Les@firemountain.uranium wrote:
> I am over it!
> Jeep for sale....$ 1800
> Lifter tick and stuck in second gear :(
>
> I took the boot off, it had a plate with 3 screws holding in a ring that
> wont budge. Under the ring is a thin washer with some cut outs. The trans,
> splits in half left to right.
>
> I want my 1952 M38 back!!
>
> Les
#57
Guest
Posts: n/a
Re: YJ stuck in gear
Side to side split is a Peugot tranny. Parts manual shows several
different versions of how the lever comes out, depends on the tranny
serial number. On mine, you need to get under the first bushing you come
to, you need to unscrew the 3 bolts that bolt into the tranny top to get
the lever freed up. Sounds like yours may be the version with a snap
ring under the first bushing.
Les@firemountain.uranium wrote:
> I am over it!
> Jeep for sale....$ 1800
> Lifter tick and stuck in second gear :(
>
> I took the boot off, it had a plate with 3 screws holding in a ring that
> wont budge. Under the ring is a thin washer with some cut outs. The trans,
> splits in half left to right.
>
> I want my 1952 M38 back!!
>
> Les
different versions of how the lever comes out, depends on the tranny
serial number. On mine, you need to get under the first bushing you come
to, you need to unscrew the 3 bolts that bolt into the tranny top to get
the lever freed up. Sounds like yours may be the version with a snap
ring under the first bushing.
Les@firemountain.uranium wrote:
> I am over it!
> Jeep for sale....$ 1800
> Lifter tick and stuck in second gear :(
>
> I took the boot off, it had a plate with 3 screws holding in a ring that
> wont budge. Under the ring is a thin washer with some cut outs. The trans,
> splits in half left to right.
>
> I want my 1952 M38 back!!
>
> Les
#58
Guest
Posts: n/a
Re: YJ stuck in gear
I'm interested in buying it... e-mail carlsaiyed@hotmail.REMOVE.com
Carl
<Les@firemountain.uranium> wrote in message
news:UCCAh.180688$qy.166672@newsfe16.lga...
> 1989 258 cui 5 speed.
> The clutch works great, I tried putting the transfer case in netural. It
> feels more stuck than disconected.
> It looks like a drag to get to the trans. But I run a machine shop and it
> is
> at work, so I have that going for me at least.
> Any one near Norfolk Va want to buy the beast? :)
> I will report todays outcome.
> Thanks for the help so far.
>
> Les
Carl
<Les@firemountain.uranium> wrote in message
news:UCCAh.180688$qy.166672@newsfe16.lga...
> 1989 258 cui 5 speed.
> The clutch works great, I tried putting the transfer case in netural. It
> feels more stuck than disconected.
> It looks like a drag to get to the trans. But I run a machine shop and it
> is
> at work, so I have that going for me at least.
> Any one near Norfolk Va want to buy the beast? :)
> I will report todays outcome.
> Thanks for the help so far.
>
> Les
#59
Guest
Posts: n/a
Re: YJ stuck in gear
I'm interested in buying it... e-mail carlsaiyed@hotmail.REMOVE.com
Carl
<Les@firemountain.uranium> wrote in message
news:UCCAh.180688$qy.166672@newsfe16.lga...
> 1989 258 cui 5 speed.
> The clutch works great, I tried putting the transfer case in netural. It
> feels more stuck than disconected.
> It looks like a drag to get to the trans. But I run a machine shop and it
> is
> at work, so I have that going for me at least.
> Any one near Norfolk Va want to buy the beast? :)
> I will report todays outcome.
> Thanks for the help so far.
>
> Les
Carl
<Les@firemountain.uranium> wrote in message
news:UCCAh.180688$qy.166672@newsfe16.lga...
> 1989 258 cui 5 speed.
> The clutch works great, I tried putting the transfer case in netural. It
> feels more stuck than disconected.
> It looks like a drag to get to the trans. But I run a machine shop and it
> is
> at work, so I have that going for me at least.
> Any one near Norfolk Va want to buy the beast? :)
> I will report todays outcome.
> Thanks for the help so far.
>
> Les
#60
Guest
Posts: n/a
Re: YJ stuck in gear
I'm interested in buying it... e-mail carlsaiyed@hotmail.REMOVE.com
Carl
<Les@firemountain.uranium> wrote in message
news:UCCAh.180688$qy.166672@newsfe16.lga...
> 1989 258 cui 5 speed.
> The clutch works great, I tried putting the transfer case in netural. It
> feels more stuck than disconected.
> It looks like a drag to get to the trans. But I run a machine shop and it
> is
> at work, so I have that going for me at least.
> Any one near Norfolk Va want to buy the beast? :)
> I will report todays outcome.
> Thanks for the help so far.
>
> Les
Carl
<Les@firemountain.uranium> wrote in message
news:UCCAh.180688$qy.166672@newsfe16.lga...
> 1989 258 cui 5 speed.
> The clutch works great, I tried putting the transfer case in netural. It
> feels more stuck than disconected.
> It looks like a drag to get to the trans. But I run a machine shop and it
> is
> at work, so I have that going for me at least.
> Any one near Norfolk Va want to buy the beast? :)
> I will report todays outcome.
> Thanks for the help so far.
>
> Les