YJ rear driveshaft idea
05-17-2005, 09:01 PM
#21
Guest
Posts: n/a
Re: YJ rear driveshaft idea
> Forgive me if I am wrong, but I don't think the front shaft is anywhere
> near stout enough to pull duty in the rear.>
He could probably get a virtually bulletproof custom driveshaft from Tom
Woods or Hi Angle Driveline for about what he's going to spend fooling with
the XJ unit.
> near stout enough to pull duty in the rear.>
He could probably get a virtually bulletproof custom driveshaft from Tom
Woods or Hi Angle Driveline for about what he's going to spend fooling with
the XJ unit.
05-17-2005, 10:31 PM
#22
Guest
Posts: n/a
Re: YJ rear driveshaft idea
"SoK66" <SoK66@frontier.net> wrote in message
news:d6e45m02oie@enews3.newsguy.com...
> > Forgive me if I am wrong, but I don't think the front shaft is anywhere
> > near stout enough to pull duty in the rear.>
>
> He could probably get a virtually bulletproof custom driveshaft from Tom
> Woods or Hi Angle Driveline for about what he's going to spend fooling
with
> the XJ unit.
>
>
That's what I was thinkin'.
05-17-2005, 10:31 PM
#23
Guest
Posts: n/a
Re: YJ rear driveshaft idea
"SoK66" <SoK66@frontier.net> wrote in message
news:d6e45m02oie@enews3.newsguy.com...
> > Forgive me if I am wrong, but I don't think the front shaft is anywhere
> > near stout enough to pull duty in the rear.>
>
> He could probably get a virtually bulletproof custom driveshaft from Tom
> Woods or Hi Angle Driveline for about what he's going to spend fooling
with
> the XJ unit.
>
>
That's what I was thinkin'.
05-17-2005, 10:31 PM
#24
Guest
Posts: n/a
Re: YJ rear driveshaft idea
"SoK66" <SoK66@frontier.net> wrote in message
news:d6e45m02oie@enews3.newsguy.com...
> > Forgive me if I am wrong, but I don't think the front shaft is anywhere
> > near stout enough to pull duty in the rear.>
>
> He could probably get a virtually bulletproof custom driveshaft from Tom
> Woods or Hi Angle Driveline for about what he's going to spend fooling
with
> the XJ unit.
>
>
That's what I was thinkin'.
05-17-2005, 10:31 PM
#25
Guest
Posts: n/a
Re: YJ rear driveshaft idea
"SoK66" <SoK66@frontier.net> wrote in message
news:d6e45m02oie@enews3.newsguy.com...
> > Forgive me if I am wrong, but I don't think the front shaft is anywhere
> > near stout enough to pull duty in the rear.>
>
> He could probably get a virtually bulletproof custom driveshaft from Tom
> Woods or Hi Angle Driveline for about what he's going to spend fooling
with
> the XJ unit.
>
>
That's what I was thinkin'.
05-18-2005, 03:58 AM
#26
Guest
Posts: n/a
Re: YJ rear driveshaft idea
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:aqSdnbPTGOGz-BffRVn-iA@ez2.net...
> Forgive me if I am wrong, but I don't think the front shaft is anywhere
> near
> stout enough to pull duty in the rear.
>
I've never seen one a YJ but there are plenty of satisfied users on NAXJA
forums that have been running them with big tires/gears for years. Some of
which have had then extended to run with 35"+ tires. I think I'm going to
try it when I get around to doing the SYE on my XJ.
-Brian
news:aqSdnbPTGOGz-BffRVn-iA@ez2.net...
> Forgive me if I am wrong, but I don't think the front shaft is anywhere
> near
> stout enough to pull duty in the rear.
>
I've never seen one a YJ but there are plenty of satisfied users on NAXJA
forums that have been running them with big tires/gears for years. Some of
which have had then extended to run with 35"+ tires. I think I'm going to
try it when I get around to doing the SYE on my XJ.
-Brian
05-18-2005, 03:58 AM
#27
Guest
Posts: n/a
Re: YJ rear driveshaft idea
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:aqSdnbPTGOGz-BffRVn-iA@ez2.net...
> Forgive me if I am wrong, but I don't think the front shaft is anywhere
> near
> stout enough to pull duty in the rear.
>
I've never seen one a YJ but there are plenty of satisfied users on NAXJA
forums that have been running them with big tires/gears for years. Some of
which have had then extended to run with 35"+ tires. I think I'm going to
try it when I get around to doing the SYE on my XJ.
-Brian
news:aqSdnbPTGOGz-BffRVn-iA@ez2.net...
> Forgive me if I am wrong, but I don't think the front shaft is anywhere
> near
> stout enough to pull duty in the rear.
>
I've never seen one a YJ but there are plenty of satisfied users on NAXJA
forums that have been running them with big tires/gears for years. Some of
which have had then extended to run with 35"+ tires. I think I'm going to
try it when I get around to doing the SYE on my XJ.
-Brian
05-18-2005, 03:58 AM
#28
Guest
Posts: n/a
Re: YJ rear driveshaft idea
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:aqSdnbPTGOGz-BffRVn-iA@ez2.net...
> Forgive me if I am wrong, but I don't think the front shaft is anywhere
> near
> stout enough to pull duty in the rear.
>
I've never seen one a YJ but there are plenty of satisfied users on NAXJA
forums that have been running them with big tires/gears for years. Some of
which have had then extended to run with 35"+ tires. I think I'm going to
try it when I get around to doing the SYE on my XJ.
-Brian
news:aqSdnbPTGOGz-BffRVn-iA@ez2.net...
> Forgive me if I am wrong, but I don't think the front shaft is anywhere
> near
> stout enough to pull duty in the rear.
>
I've never seen one a YJ but there are plenty of satisfied users on NAXJA
forums that have been running them with big tires/gears for years. Some of
which have had then extended to run with 35"+ tires. I think I'm going to
try it when I get around to doing the SYE on my XJ.
-Brian
05-18-2005, 03:58 AM
#29
Guest
Posts: n/a
Re: YJ rear driveshaft idea
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:aqSdnbPTGOGz-BffRVn-iA@ez2.net...
> Forgive me if I am wrong, but I don't think the front shaft is anywhere
> near
> stout enough to pull duty in the rear.
>
I've never seen one a YJ but there are plenty of satisfied users on NAXJA
forums that have been running them with big tires/gears for years. Some of
which have had then extended to run with 35"+ tires. I think I'm going to
try it when I get around to doing the SYE on my XJ.
-Brian
news:aqSdnbPTGOGz-BffRVn-iA@ez2.net...
> Forgive me if I am wrong, but I don't think the front shaft is anywhere
> near
> stout enough to pull duty in the rear.
>
I've never seen one a YJ but there are plenty of satisfied users on NAXJA
forums that have been running them with big tires/gears for years. Some of
which have had then extended to run with 35"+ tires. I think I'm going to
try it when I get around to doing the SYE on my XJ.
-Brian
Thread
Thread Starter
Forum
Replies
Last Post
Eric
Jeep Mailing List
15
08-04-2003 07:27 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)