Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's with
4.10's. Reccomendations on a new clutch? Centerforce? Do I need to resurface
the flywheel? Tips?


Thanks

Carl

 

Will this clutch do the job?

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7988240183

I found a centerforce for $230 without throwout bearing..

Carl


"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>

 

Will this clutch do the job?

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7988240183

I found a centerforce for $230 without throwout bearing..

Carl


"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>

 

Will this clutch do the job?

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7988240183

I found a centerforce for $230 without throwout bearing..

Carl


"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>

 

Will this clutch do the job?

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7988240183

I found a centerforce for $230 without throwout bearing..

Carl


"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>

 

I also remember reading about removing material from the flywheel to make it
lighter and increase power. Any truth to this?

Carl


"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>

 

I also remember reading about removing material from the flywheel to make it
lighter and increase power. Any truth to this?

Carl


"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>

 

I also remember reading about removing material from the flywheel to make it
lighter and increase power. Any truth to this?

Carl


"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>

 

I also remember reading about removing material from the flywheel to make it
lighter and increase power. Any truth to this?

Carl


"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>

 

Yes, if you have power, but if you're low on it to begin with, then
you go heavier like the stock Real Jeep V6 uses fifty pounds to store
energy: http://www.4x4wire.com/tech/clutch/inertiaring/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Carl Saiyed wrote:
>
> I also remember reading about removing material from the flywheel to make it
> lighter and increase power. Any truth to this?
>
> Carl