YJ Clutch
07-24-2005, 05:17 PM
#21
Guest
Posts: n/a
Re: YJ Clutch
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
> with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
> resurface
> the flywheel? Tips?
Centerforce is good. Yes, you should always resurface the flywheel, IMO,
just as you should generally do for your brake rotors. Your clutch will like
it better with a fresh surface.
> with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
> resurface
> the flywheel? Tips?
Centerforce is good. Yes, you should always resurface the flywheel, IMO,
just as you should generally do for your brake rotors. Your clutch will like
it better with a fresh surface.
07-24-2005, 05:34 PM
#22
Guest
Posts: n/a
Re: YJ Clutch
There is NO benefit to the overhyped Centerforce clutch for a
low-revving engine like a Jeep engine. Its design is meant for high-RPM
high-HP engines so it locks up firmer at high RPMs it won't slip from
enormous HP engines.
For the $$$, it's REAL hard to beat either the OE clutch or one from
Luk, who makes the OE clutch. Heck, after being smoked many times while
rock crawling, my TJ's clutch is still going strong with 154K miles on
it. If I don't swap in an automatic trannie when my clutch finally
goes, I'll install either another OE or probably a Luk which is
available pretty cheaply on the Internet.
Jerry
Carl Saiyed wrote:
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
low-revving engine like a Jeep engine. Its design is meant for high-RPM
high-HP engines so it locks up firmer at high RPMs it won't slip from
enormous HP engines.
For the $$$, it's REAL hard to beat either the OE clutch or one from
Luk, who makes the OE clutch. Heck, after being smoked many times while
rock crawling, my TJ's clutch is still going strong with 154K miles on
it. If I don't swap in an automatic trannie when my clutch finally
goes, I'll install either another OE or probably a Luk which is
available pretty cheaply on the Internet.
Jerry
Carl Saiyed wrote:
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
07-24-2005, 05:34 PM
#23
Guest
Posts: n/a
Re: YJ Clutch
There is NO benefit to the overhyped Centerforce clutch for a
low-revving engine like a Jeep engine. Its design is meant for high-RPM
high-HP engines so it locks up firmer at high RPMs it won't slip from
enormous HP engines.
For the $$$, it's REAL hard to beat either the OE clutch or one from
Luk, who makes the OE clutch. Heck, after being smoked many times while
rock crawling, my TJ's clutch is still going strong with 154K miles on
it. If I don't swap in an automatic trannie when my clutch finally
goes, I'll install either another OE or probably a Luk which is
available pretty cheaply on the Internet.
Jerry
Carl Saiyed wrote:
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
low-revving engine like a Jeep engine. Its design is meant for high-RPM
high-HP engines so it locks up firmer at high RPMs it won't slip from
enormous HP engines.
For the $$$, it's REAL hard to beat either the OE clutch or one from
Luk, who makes the OE clutch. Heck, after being smoked many times while
rock crawling, my TJ's clutch is still going strong with 154K miles on
it. If I don't swap in an automatic trannie when my clutch finally
goes, I'll install either another OE or probably a Luk which is
available pretty cheaply on the Internet.
Jerry
Carl Saiyed wrote:
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
07-24-2005, 05:34 PM
#24
Guest
Posts: n/a
Re: YJ Clutch
There is NO benefit to the overhyped Centerforce clutch for a
low-revving engine like a Jeep engine. Its design is meant for high-RPM
high-HP engines so it locks up firmer at high RPMs it won't slip from
enormous HP engines.
For the $$$, it's REAL hard to beat either the OE clutch or one from
Luk, who makes the OE clutch. Heck, after being smoked many times while
rock crawling, my TJ's clutch is still going strong with 154K miles on
it. If I don't swap in an automatic trannie when my clutch finally
goes, I'll install either another OE or probably a Luk which is
available pretty cheaply on the Internet.
Jerry
Carl Saiyed wrote:
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
low-revving engine like a Jeep engine. Its design is meant for high-RPM
high-HP engines so it locks up firmer at high RPMs it won't slip from
enormous HP engines.
For the $$$, it's REAL hard to beat either the OE clutch or one from
Luk, who makes the OE clutch. Heck, after being smoked many times while
rock crawling, my TJ's clutch is still going strong with 154K miles on
it. If I don't swap in an automatic trannie when my clutch finally
goes, I'll install either another OE or probably a Luk which is
available pretty cheaply on the Internet.
Jerry
Carl Saiyed wrote:
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
07-24-2005, 05:34 PM
#25
Guest
Posts: n/a
Re: YJ Clutch
There is NO benefit to the overhyped Centerforce clutch for a
low-revving engine like a Jeep engine. Its design is meant for high-RPM
high-HP engines so it locks up firmer at high RPMs it won't slip from
enormous HP engines.
For the $$$, it's REAL hard to beat either the OE clutch or one from
Luk, who makes the OE clutch. Heck, after being smoked many times while
rock crawling, my TJ's clutch is still going strong with 154K miles on
it. If I don't swap in an automatic trannie when my clutch finally
goes, I'll install either another OE or probably a Luk which is
available pretty cheaply on the Internet.
Jerry
Carl Saiyed wrote:
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
low-revving engine like a Jeep engine. Its design is meant for high-RPM
high-HP engines so it locks up firmer at high RPMs it won't slip from
enormous HP engines.
For the $$$, it's REAL hard to beat either the OE clutch or one from
Luk, who makes the OE clutch. Heck, after being smoked many times while
rock crawling, my TJ's clutch is still going strong with 154K miles on
it. If I don't swap in an automatic trannie when my clutch finally
goes, I'll install either another OE or probably a Luk which is
available pretty cheaply on the Internet.
Jerry
Carl Saiyed wrote:
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
07-24-2005, 08:53 PM
#26
Guest
Posts: n/a
Re: YJ Clutch
I found a Luk clutch for $170 at
http://www.dialaclutch.com/dac-demo/dosearch.asp .
Is this a good price?
Carl
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
http://www.dialaclutch.com/dac-demo/dosearch.asp .
Is this a good price?
Carl
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
07-24-2005, 08:53 PM
#27
Guest
Posts: n/a
Re: YJ Clutch
I found a Luk clutch for $170 at
http://www.dialaclutch.com/dac-demo/dosearch.asp .
Is this a good price?
Carl
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
http://www.dialaclutch.com/dac-demo/dosearch.asp .
Is this a good price?
Carl
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
07-24-2005, 08:53 PM
#28
Guest
Posts: n/a
Re: YJ Clutch
I found a Luk clutch for $170 at
http://www.dialaclutch.com/dac-demo/dosearch.asp .
Is this a good price?
Carl
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
http://www.dialaclutch.com/dac-demo/dosearch.asp .
Is this a good price?
Carl
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
07-24-2005, 08:53 PM
#29
Guest
Posts: n/a
Re: YJ Clutch
I found a Luk clutch for $170 at
http://www.dialaclutch.com/dac-demo/dosearch.asp .
Is this a good price?
Carl
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
http://www.dialaclutch.com/dac-demo/dosearch.asp .
Is this a good price?
Carl
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42e3124d_1@newsfeed.slurp.net...
> Burned the poo out of my clutch in my 89 YJ today. It's a 2.5L on 33's
with
> 4.10's. Reccomendations on a new clutch? Centerforce? Do I need to
resurface
> the flywheel? Tips?
>
>
> Thanks
>
> Carl
>
>
07-24-2005, 11:01 PM
#30
Guest
Posts: n/a
Re: YJ Clutch
> There is NO benefit to the overhyped Centerforce clutch for a low-revving
> engine like a Jeep engine. Its design is meant for high-RPM high-HP
> engines so it locks up firmer at high RPMs it won't slip from enormous HP
> engines.
Centerforce makes other clutches besides the Dual Friction model...
> engine like a Jeep engine. Its design is meant for high-RPM high-HP
> engines so it locks up firmer at high RPMs it won't slip from enormous HP
> engines.
Centerforce makes other clutches besides the Dual Friction model...