YJ Axle Seal
05-20-2004, 10:19 PM
#51
Guest
Posts: n/a
Re: YJ Axle Seal
The inner bearing for the intermediate shaft has an integral seal.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AD500E.4F7A739E@***.net...
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AD500E.4F7A739E@***.net...
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
05-20-2004, 10:19 PM
#52
Guest
Posts: n/a
Re: YJ Axle Seal
The inner bearing for the intermediate shaft has an integral seal.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AD500E.4F7A739E@***.net...
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AD500E.4F7A739E@***.net...
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
05-20-2004, 10:19 PM
#53
Guest
Posts: n/a
Re: YJ Axle Seal
The inner bearing for the intermediate shaft has an integral seal.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AD500E.4F7A739E@***.net...
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AD500E.4F7A739E@***.net...
> Also confirmed on Chrysler's parts page:
> http://www.----------.com/dana30/YJDana30.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Mike Romain wrote:
> >
> > I was going to say something Bill, but wasn't 100% sure. I remember
> > having this discussion before maybe I think and there wasn't one on the
> > YJ I helped do. Only the one seal per side.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
05-21-2004, 12:03 AM
#54
Guest
Posts: n/a
Re: YJ Axle Seal
I have read that they do and never looked when I had it apart..... I
wonder why the need to put fluid in the vac disconnect housing if you
don't have an inner seal.
On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> I don't show an inner seal on the right side:
>http://www.----------.com/dana30/index.htm
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeepster wrote:
>>
>> I have a little pump I use for diff fluid and each time I take it
>> apart I pump in enough to give the gear lubrication
>>
>> I kind of though the inner and outer seals where the same but I was
>> thinking that the inner seal might be completely gone and overwhelming
>> the outer seal. I'm guessing now that the shaft is scored enough to
>> not give me a good seal or I messed up the seal on installation.
wonder why the need to put fluid in the vac disconnect housing if you
don't have an inner seal.
On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> I don't show an inner seal on the right side:
>http://www.----------.com/dana30/index.htm
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeepster wrote:
>>
>> I have a little pump I use for diff fluid and each time I take it
>> apart I pump in enough to give the gear lubrication
>>
>> I kind of though the inner and outer seals where the same but I was
>> thinking that the inner seal might be completely gone and overwhelming
>> the outer seal. I'm guessing now that the shaft is scored enough to
>> not give me a good seal or I messed up the seal on installation.
05-21-2004, 12:03 AM
#55
Guest
Posts: n/a
Re: YJ Axle Seal
I have read that they do and never looked when I had it apart..... I
wonder why the need to put fluid in the vac disconnect housing if you
don't have an inner seal.
On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> I don't show an inner seal on the right side:
>http://www.----------.com/dana30/index.htm
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeepster wrote:
>>
>> I have a little pump I use for diff fluid and each time I take it
>> apart I pump in enough to give the gear lubrication
>>
>> I kind of though the inner and outer seals where the same but I was
>> thinking that the inner seal might be completely gone and overwhelming
>> the outer seal. I'm guessing now that the shaft is scored enough to
>> not give me a good seal or I messed up the seal on installation.
wonder why the need to put fluid in the vac disconnect housing if you
don't have an inner seal.
On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> I don't show an inner seal on the right side:
>http://www.----------.com/dana30/index.htm
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeepster wrote:
>>
>> I have a little pump I use for diff fluid and each time I take it
>> apart I pump in enough to give the gear lubrication
>>
>> I kind of though the inner and outer seals where the same but I was
>> thinking that the inner seal might be completely gone and overwhelming
>> the outer seal. I'm guessing now that the shaft is scored enough to
>> not give me a good seal or I messed up the seal on installation.
05-21-2004, 12:03 AM
#56
Guest
Posts: n/a
Re: YJ Axle Seal
I have read that they do and never looked when I had it apart..... I
wonder why the need to put fluid in the vac disconnect housing if you
don't have an inner seal.
On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> I don't show an inner seal on the right side:
>http://www.----------.com/dana30/index.htm
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeepster wrote:
>>
>> I have a little pump I use for diff fluid and each time I take it
>> apart I pump in enough to give the gear lubrication
>>
>> I kind of though the inner and outer seals where the same but I was
>> thinking that the inner seal might be completely gone and overwhelming
>> the outer seal. I'm guessing now that the shaft is scored enough to
>> not give me a good seal or I messed up the seal on installation.
wonder why the need to put fluid in the vac disconnect housing if you
don't have an inner seal.
On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> I don't show an inner seal on the right side:
>http://www.----------.com/dana30/index.htm
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeepster wrote:
>>
>> I have a little pump I use for diff fluid and each time I take it
>> apart I pump in enough to give the gear lubrication
>>
>> I kind of though the inner and outer seals where the same but I was
>> thinking that the inner seal might be completely gone and overwhelming
>> the outer seal. I'm guessing now that the shaft is scored enough to
>> not give me a good seal or I messed up the seal on installation.
05-21-2004, 12:03 AM
#57
Guest
Posts: n/a
Re: YJ Axle Seal
I have read that they do and never looked when I had it apart..... I
wonder why the need to put fluid in the vac disconnect housing if you
don't have an inner seal.
On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> I don't show an inner seal on the right side:
>http://www.----------.com/dana30/index.htm
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeepster wrote:
>>
>> I have a little pump I use for diff fluid and each time I take it
>> apart I pump in enough to give the gear lubrication
>>
>> I kind of though the inner and outer seals where the same but I was
>> thinking that the inner seal might be completely gone and overwhelming
>> the outer seal. I'm guessing now that the shaft is scored enough to
>> not give me a good seal or I messed up the seal on installation.
wonder why the need to put fluid in the vac disconnect housing if you
don't have an inner seal.
On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> I don't show an inner seal on the right side:
>http://www.----------.com/dana30/index.htm
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeepster wrote:
>>
>> I have a little pump I use for diff fluid and each time I take it
>> apart I pump in enough to give the gear lubrication
>>
>> I kind of though the inner and outer seals where the same but I was
>> thinking that the inner seal might be completely gone and overwhelming
>> the outer seal. I'm guessing now that the shaft is scored enough to
>> not give me a good seal or I messed up the seal on installation.
05-21-2004, 09:50 AM
#58
Guest
Posts: n/a
Re: YJ Axle Seal
To prelub it so it doesn't wear before oil splashes up there?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeepster wrote:
>
> I have read that they do and never looked when I had it apart..... I
> wonder why the need to put fluid in the vac disconnect housing if you
> don't have an inner seal.
>
> On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > I don't show an inner seal on the right side:
> >http://www.----------.com/dana30/index.htm
> > God Bless America, ßill O|||||||O
> >mailto:--------------------
> >
> >Jeepster wrote:
> >>
> >> I have a little pump I use for diff fluid and each time I take it
> >> apart I pump in enough to give the gear lubrication
> >>
> >> I kind of though the inner and outer seals where the same but I was
> >> thinking that the inner seal might be completely gone and overwhelming
> >> the outer seal. I'm guessing now that the shaft is scored enough to
> >> not give me a good seal or I messed up the seal on installation.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeepster wrote:
>
> I have read that they do and never looked when I had it apart..... I
> wonder why the need to put fluid in the vac disconnect housing if you
> don't have an inner seal.
>
> On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > I don't show an inner seal on the right side:
> >http://www.----------.com/dana30/index.htm
> > God Bless America, ßill O|||||||O
> >mailto:--------------------
> >
> >Jeepster wrote:
> >>
> >> I have a little pump I use for diff fluid and each time I take it
> >> apart I pump in enough to give the gear lubrication
> >>
> >> I kind of though the inner and outer seals where the same but I was
> >> thinking that the inner seal might be completely gone and overwhelming
> >> the outer seal. I'm guessing now that the shaft is scored enough to
> >> not give me a good seal or I messed up the seal on installation.
05-21-2004, 09:50 AM
#59
Guest
Posts: n/a
Re: YJ Axle Seal
To prelub it so it doesn't wear before oil splashes up there?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeepster wrote:
>
> I have read that they do and never looked when I had it apart..... I
> wonder why the need to put fluid in the vac disconnect housing if you
> don't have an inner seal.
>
> On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > I don't show an inner seal on the right side:
> >http://www.----------.com/dana30/index.htm
> > God Bless America, ßill O|||||||O
> >mailto:--------------------
> >
> >Jeepster wrote:
> >>
> >> I have a little pump I use for diff fluid and each time I take it
> >> apart I pump in enough to give the gear lubrication
> >>
> >> I kind of though the inner and outer seals where the same but I was
> >> thinking that the inner seal might be completely gone and overwhelming
> >> the outer seal. I'm guessing now that the shaft is scored enough to
> >> not give me a good seal or I messed up the seal on installation.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeepster wrote:
>
> I have read that they do and never looked when I had it apart..... I
> wonder why the need to put fluid in the vac disconnect housing if you
> don't have an inner seal.
>
> On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > I don't show an inner seal on the right side:
> >http://www.----------.com/dana30/index.htm
> > God Bless America, ßill O|||||||O
> >mailto:--------------------
> >
> >Jeepster wrote:
> >>
> >> I have a little pump I use for diff fluid and each time I take it
> >> apart I pump in enough to give the gear lubrication
> >>
> >> I kind of though the inner and outer seals where the same but I was
> >> thinking that the inner seal might be completely gone and overwhelming
> >> the outer seal. I'm guessing now that the shaft is scored enough to
> >> not give me a good seal or I messed up the seal on installation.
05-21-2004, 09:50 AM
#60
Guest
Posts: n/a
Re: YJ Axle Seal
To prelub it so it doesn't wear before oil splashes up there?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeepster wrote:
>
> I have read that they do and never looked when I had it apart..... I
> wonder why the need to put fluid in the vac disconnect housing if you
> don't have an inner seal.
>
> On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > I don't show an inner seal on the right side:
> >http://www.----------.com/dana30/index.htm
> > God Bless America, ßill O|||||||O
> >mailto:--------------------
> >
> >Jeepster wrote:
> >>
> >> I have a little pump I use for diff fluid and each time I take it
> >> apart I pump in enough to give the gear lubrication
> >>
> >> I kind of though the inner and outer seals where the same but I was
> >> thinking that the inner seal might be completely gone and overwhelming
> >> the outer seal. I'm guessing now that the shaft is scored enough to
> >> not give me a good seal or I messed up the seal on installation.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeepster wrote:
>
> I have read that they do and never looked when I had it apart..... I
> wonder why the need to put fluid in the vac disconnect housing if you
> don't have an inner seal.
>
> On Thu, 20 May 2004 16:29:11 -0700, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > I don't show an inner seal on the right side:
> >http://www.----------.com/dana30/index.htm
> > God Bless America, ßill O|||||||O
> >mailto:--------------------
> >
> >Jeepster wrote:
> >>
> >> I have a little pump I use for diff fluid and each time I take it
> >> apart I pump in enough to give the gear lubrication
> >>
> >> I kind of though the inner and outer seals where the same but I was
> >> thinking that the inner seal might be completely gone and overwhelming
> >> the outer seal. I'm guessing now that the shaft is scored enough to
> >> not give me a good seal or I messed up the seal on installation.