XJ idler pulley
05-11-2005, 09:11 AM
#1
Guest
Posts: n/a
XJ idler pulley
Hi
I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
mounted on a casting bolted to the top right hand of the cylinder head. This
pulley is noisy, is this pulley available separately or do I have to buy the
complete unit as my local dealer tells me?
Thanks
Barry Stone
I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
mounted on a casting bolted to the top right hand of the cylinder head. This
pulley is noisy, is this pulley available separately or do I have to buy the
complete unit as my local dealer tells me?
Thanks
Barry Stone
05-11-2005, 01:07 PM
#2
Guest
Posts: n/a
Re: XJ idler pulley
I bought the bolt, the bushing and the big washer all as individual
parts from the $tealer here in Canada.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Barry wrote:
>
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
> Thanks
> Barry Stone
parts from the $tealer here in Canada.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Barry wrote:
>
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
> Thanks
> Barry Stone
05-11-2005, 01:07 PM
#3
Guest
Posts: n/a
Re: XJ idler pulley
I bought the bolt, the bushing and the big washer all as individual
parts from the $tealer here in Canada.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Barry wrote:
>
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
> Thanks
> Barry Stone
parts from the $tealer here in Canada.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Barry wrote:
>
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
> Thanks
> Barry Stone
05-11-2005, 01:07 PM
#4
Guest
Posts: n/a
Re: XJ idler pulley
I bought the bolt, the bushing and the big washer all as individual
parts from the $tealer here in Canada.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Barry wrote:
>
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
> Thanks
> Barry Stone
parts from the $tealer here in Canada.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Barry wrote:
>
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
> Thanks
> Barry Stone
05-11-2005, 01:07 PM
#5
Guest
Posts: n/a
Re: XJ idler pulley
I bought the bolt, the bushing and the big washer all as individual
parts from the $tealer here in Canada.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Barry wrote:
>
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
> Thanks
> Barry Stone
parts from the $tealer here in Canada.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Barry wrote:
>
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
> Thanks
> Barry Stone
05-11-2005, 11:41 PM
#6
Guest
Posts: n/a
Re: XJ idler pulley
Barry did pass the time by typing:
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
Odd, The 93 4L over on this side of the pond didn't come with
a spring loaded tensioner that year. The stock idlers on mine
run about 20$US but the adjustment is made by sliding the power
steering pump back and forth. Most idlers can be had at any
decent parts store. All you need is the width, diameter, and
size of the mouting hole.
Dave Milne reads this group. He's over there and probably knows
better sources than I do.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
Odd, The 93 4L over on this side of the pond didn't come with
a spring loaded tensioner that year. The stock idlers on mine
run about 20$US but the adjustment is made by sliding the power
steering pump back and forth. Most idlers can be had at any
decent parts store. All you need is the width, diameter, and
size of the mouting hole.
Dave Milne reads this group. He's over there and probably knows
better sources than I do.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
05-11-2005, 11:41 PM
#7
Guest
Posts: n/a
Re: XJ idler pulley
Barry did pass the time by typing:
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
Odd, The 93 4L over on this side of the pond didn't come with
a spring loaded tensioner that year. The stock idlers on mine
run about 20$US but the adjustment is made by sliding the power
steering pump back and forth. Most idlers can be had at any
decent parts store. All you need is the width, diameter, and
size of the mouting hole.
Dave Milne reads this group. He's over there and probably knows
better sources than I do.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
Odd, The 93 4L over on this side of the pond didn't come with
a spring loaded tensioner that year. The stock idlers on mine
run about 20$US but the adjustment is made by sliding the power
steering pump back and forth. Most idlers can be had at any
decent parts store. All you need is the width, diameter, and
size of the mouting hole.
Dave Milne reads this group. He's over there and probably knows
better sources than I do.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
05-11-2005, 11:41 PM
#8
Guest
Posts: n/a
Re: XJ idler pulley
Barry did pass the time by typing:
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
Odd, The 93 4L over on this side of the pond didn't come with
a spring loaded tensioner that year. The stock idlers on mine
run about 20$US but the adjustment is made by sliding the power
steering pump back and forth. Most idlers can be had at any
decent parts store. All you need is the width, diameter, and
size of the mouting hole.
Dave Milne reads this group. He's over there and probably knows
better sources than I do.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
Odd, The 93 4L over on this side of the pond didn't come with
a spring loaded tensioner that year. The stock idlers on mine
run about 20$US but the adjustment is made by sliding the power
steering pump back and forth. Most idlers can be had at any
decent parts store. All you need is the width, diameter, and
size of the mouting hole.
Dave Milne reads this group. He's over there and probably knows
better sources than I do.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
05-11-2005, 11:41 PM
#9
Guest
Posts: n/a
Re: XJ idler pulley
Barry did pass the time by typing:
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
Odd, The 93 4L over on this side of the pond didn't come with
a spring loaded tensioner that year. The stock idlers on mine
run about 20$US but the adjustment is made by sliding the power
steering pump back and forth. Most idlers can be had at any
decent parts store. All you need is the width, diameter, and
size of the mouting hole.
Dave Milne reads this group. He's over there and probably knows
better sources than I do.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Hi
> I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is
> tensioned by a ribbed plastic idler wheel sprung loaded by a spring,
> mounted on a casting bolted to the top right hand of the cylinder head. This
> pulley is noisy, is this pulley available separately or do I have to buy the
> complete unit as my local dealer tells me?
Odd, The 93 4L over on this side of the pond didn't come with
a spring loaded tensioner that year. The stock idlers on mine
run about 20$US but the adjustment is made by sliding the power
steering pump back and forth. Most idlers can be had at any
decent parts store. All you need is the width, diameter, and
size of the mouting hole.
Dave Milne reads this group. He's over there and probably knows
better sources than I do.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
Thread
Thread Starter
Forum
Replies
Last Post
csperlein
Jeep Mailing List
0
11-11-2003 01:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)