XJ idler pulley
Hi
I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is tensioned by a ribbed plastic idler wheel sprung loaded by a spring, mounted on a casting bolted to the top right hand of the cylinder head. This pulley is noisy, is this pulley available separately or do I have to buy the complete unit as my local dealer tells me? Thanks Barry Stone |
Re: XJ idler pulley
I bought the bolt, the bushing and the big washer all as individual
parts from the $tealer here in Canada. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Barry wrote: > > Hi > I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is > tensioned by a ribbed plastic idler wheel sprung loaded by a spring, > mounted on a casting bolted to the top right hand of the cylinder head. This > pulley is noisy, is this pulley available separately or do I have to buy the > complete unit as my local dealer tells me? > Thanks > Barry Stone |
Re: XJ idler pulley
I bought the bolt, the bushing and the big washer all as individual
parts from the $tealer here in Canada. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Barry wrote: > > Hi > I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is > tensioned by a ribbed plastic idler wheel sprung loaded by a spring, > mounted on a casting bolted to the top right hand of the cylinder head. This > pulley is noisy, is this pulley available separately or do I have to buy the > complete unit as my local dealer tells me? > Thanks > Barry Stone |
Re: XJ idler pulley
I bought the bolt, the bushing and the big washer all as individual
parts from the $tealer here in Canada. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Barry wrote: > > Hi > I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is > tensioned by a ribbed plastic idler wheel sprung loaded by a spring, > mounted on a casting bolted to the top right hand of the cylinder head. This > pulley is noisy, is this pulley available separately or do I have to buy the > complete unit as my local dealer tells me? > Thanks > Barry Stone |
Re: XJ idler pulley
I bought the bolt, the bushing and the big washer all as individual
parts from the $tealer here in Canada. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Barry wrote: > > Hi > I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is > tensioned by a ribbed plastic idler wheel sprung loaded by a spring, > mounted on a casting bolted to the top right hand of the cylinder head. This > pulley is noisy, is this pulley available separately or do I have to buy the > complete unit as my local dealer tells me? > Thanks > Barry Stone |
Re: XJ idler pulley
Barry did pass the time by typing:
> Hi > I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is > tensioned by a ribbed plastic idler wheel sprung loaded by a spring, > mounted on a casting bolted to the top right hand of the cylinder head. This > pulley is noisy, is this pulley available separately or do I have to buy the > complete unit as my local dealer tells me? Odd, The 93 4L over on this side of the pond didn't come with a spring loaded tensioner that year. The stock idlers on mine run about 20$US but the adjustment is made by sliding the power steering pump back and forth. Most idlers can be had at any decent parts store. All you need is the width, diameter, and size of the mouting hole. Dave Milne reads this group. He's over there and probably knows better sources than I do. -- -- DougW -- 93 ZJ 4.0 http://members.cox.net/wilsond HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors Banks Header - and BEER, in the fridge! |
Re: XJ idler pulley
Barry did pass the time by typing:
> Hi > I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is > tensioned by a ribbed plastic idler wheel sprung loaded by a spring, > mounted on a casting bolted to the top right hand of the cylinder head. This > pulley is noisy, is this pulley available separately or do I have to buy the > complete unit as my local dealer tells me? Odd, The 93 4L over on this side of the pond didn't come with a spring loaded tensioner that year. The stock idlers on mine run about 20$US but the adjustment is made by sliding the power steering pump back and forth. Most idlers can be had at any decent parts store. All you need is the width, diameter, and size of the mouting hole. Dave Milne reads this group. He's over there and probably knows better sources than I do. -- -- DougW -- 93 ZJ 4.0 http://members.cox.net/wilsond HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors Banks Header - and BEER, in the fridge! |
Re: XJ idler pulley
Barry did pass the time by typing:
> Hi > I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is > tensioned by a ribbed plastic idler wheel sprung loaded by a spring, > mounted on a casting bolted to the top right hand of the cylinder head. This > pulley is noisy, is this pulley available separately or do I have to buy the > complete unit as my local dealer tells me? Odd, The 93 4L over on this side of the pond didn't come with a spring loaded tensioner that year. The stock idlers on mine run about 20$US but the adjustment is made by sliding the power steering pump back and forth. Most idlers can be had at any decent parts store. All you need is the width, diameter, and size of the mouting hole. Dave Milne reads this group. He's over there and probably knows better sources than I do. -- -- DougW -- 93 ZJ 4.0 http://members.cox.net/wilsond HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors Banks Header - and BEER, in the fridge! |
Re: XJ idler pulley
Barry did pass the time by typing:
> Hi > I have a RHD 1993 Cherokee XJ 4L here in the UK. The serpentine belt is > tensioned by a ribbed plastic idler wheel sprung loaded by a spring, > mounted on a casting bolted to the top right hand of the cylinder head. This > pulley is noisy, is this pulley available separately or do I have to buy the > complete unit as my local dealer tells me? Odd, The 93 4L over on this side of the pond didn't come with a spring loaded tensioner that year. The stock idlers on mine run about 20$US but the adjustment is made by sliding the power steering pump back and forth. Most idlers can be had at any decent parts store. All you need is the width, diameter, and size of the mouting hole. Dave Milne reads this group. He's over there and probably knows better sources than I do. -- -- DougW -- 93 ZJ 4.0 http://members.cox.net/wilsond HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors Banks Header - and BEER, in the fridge! |
All times are GMT -4. The time now is 11:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands