XJ eating fuel pumps
11-05-2003, 02:20 PM
#81
Guest
Posts: n/a
Re: XJ eating fuel pumps
A hundred years ago burobios didn't appear in Kerosene, either.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
John Davies wrote:
>
> Biobor is a "pesticide" of sorts - it kills fungi dead dead dead. It
> is best used as a preventative on a routine basis. It is _only_ for
> diesel or jet fuel, or other kerosine-like fuels. There are many other
> similar diesel fuel treatments to prevent growth in the tanks.
>
> Fungal growth will NOT appear in gasoline.
>
> http://www.hammondscos.com/fuel/biobor_jf.html
>
> I was in error in not pointing out earlier that it is a fungal growth,
> not a bacterial growth, that causes the problem.
>
> John Davies
> Spoakne WA USA
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
John Davies wrote:
>
> Biobor is a "pesticide" of sorts - it kills fungi dead dead dead. It
> is best used as a preventative on a routine basis. It is _only_ for
> diesel or jet fuel, or other kerosine-like fuels. There are many other
> similar diesel fuel treatments to prevent growth in the tanks.
>
> Fungal growth will NOT appear in gasoline.
>
> http://www.hammondscos.com/fuel/biobor_jf.html
>
> I was in error in not pointing out earlier that it is a fungal growth,
> not a bacterial growth, that causes the problem.
>
> John Davies
> Spoakne WA USA
11-05-2003, 02:20 PM
#82
Guest
Posts: n/a
Re: XJ eating fuel pumps
A hundred years ago burobios didn't appear in Kerosene, either.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
John Davies wrote:
>
> Biobor is a "pesticide" of sorts - it kills fungi dead dead dead. It
> is best used as a preventative on a routine basis. It is _only_ for
> diesel or jet fuel, or other kerosine-like fuels. There are many other
> similar diesel fuel treatments to prevent growth in the tanks.
>
> Fungal growth will NOT appear in gasoline.
>
> http://www.hammondscos.com/fuel/biobor_jf.html
>
> I was in error in not pointing out earlier that it is a fungal growth,
> not a bacterial growth, that causes the problem.
>
> John Davies
> Spoakne WA USA
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
John Davies wrote:
>
> Biobor is a "pesticide" of sorts - it kills fungi dead dead dead. It
> is best used as a preventative on a routine basis. It is _only_ for
> diesel or jet fuel, or other kerosine-like fuels. There are many other
> similar diesel fuel treatments to prevent growth in the tanks.
>
> Fungal growth will NOT appear in gasoline.
>
> http://www.hammondscos.com/fuel/biobor_jf.html
>
> I was in error in not pointing out earlier that it is a fungal growth,
> not a bacterial growth, that causes the problem.
>
> John Davies
> Spoakne WA USA
11-05-2003, 02:27 PM
#83
Guest
Posts: n/a
Re: XJ eating fuel pumps
Plus the pump depends on being submerged or at least sloshed on to
prevent it from over heating.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Calman wrote:
>
> Running near empty causes a lot of air to enter the pump, seriously
> shortening it's life.
> I don't like to let a fuel injected vehicle get below a quarter tank .
>
> Other causes might include a defective pressure regulator or leaks between
> the pump and the tank outlet.
>
> --
> Paul Calman, Hathaway Pines, California
prevent it from over heating.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Calman wrote:
>
> Running near empty causes a lot of air to enter the pump, seriously
> shortening it's life.
> I don't like to let a fuel injected vehicle get below a quarter tank .
>
> Other causes might include a defective pressure regulator or leaks between
> the pump and the tank outlet.
>
> --
> Paul Calman, Hathaway Pines, California
11-05-2003, 02:27 PM
#84
Guest
Posts: n/a
Re: XJ eating fuel pumps
Plus the pump depends on being submerged or at least sloshed on to
prevent it from over heating.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Calman wrote:
>
> Running near empty causes a lot of air to enter the pump, seriously
> shortening it's life.
> I don't like to let a fuel injected vehicle get below a quarter tank .
>
> Other causes might include a defective pressure regulator or leaks between
> the pump and the tank outlet.
>
> --
> Paul Calman, Hathaway Pines, California
prevent it from over heating.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Calman wrote:
>
> Running near empty causes a lot of air to enter the pump, seriously
> shortening it's life.
> I don't like to let a fuel injected vehicle get below a quarter tank .
>
> Other causes might include a defective pressure regulator or leaks between
> the pump and the tank outlet.
>
> --
> Paul Calman, Hathaway Pines, California
11-05-2003, 02:27 PM
#85
Guest
Posts: n/a
Re: XJ eating fuel pumps
Plus the pump depends on being submerged or at least sloshed on to
prevent it from over heating.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Calman wrote:
>
> Running near empty causes a lot of air to enter the pump, seriously
> shortening it's life.
> I don't like to let a fuel injected vehicle get below a quarter tank .
>
> Other causes might include a defective pressure regulator or leaks between
> the pump and the tank outlet.
>
> --
> Paul Calman, Hathaway Pines, California
prevent it from over heating.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Calman wrote:
>
> Running near empty causes a lot of air to enter the pump, seriously
> shortening it's life.
> I don't like to let a fuel injected vehicle get below a quarter tank .
>
> Other causes might include a defective pressure regulator or leaks between
> the pump and the tank outlet.
>
> --
> Paul Calman, Hathaway Pines, California
11-05-2003, 04:41 PM
#86
Guest
Posts: n/a
Re: XJ eating fuel pumps
The pump gets the largest part of it's cooling from the flow rather
than from the immersion. Look where your pump sits and figure just
how much gas you need to keep it submerged - at least half a tank -
and mine sites at least 2 inches off the bottom of the tank just
because of the inlet nozzle and sock. One of the replacement pumps I
got for a GM actually had a test procedure in the instructions and the
restrictions were that it be used to pump gasoline only and that it
was never to be operated with no flow/dry.
On Wed, 5 Nov 2003 19:27:27 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Plus the pump depends on being submerged or at least sloshed on to
> prevent it from over heating.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Paul Calman wrote:
> >
> > Running near empty causes a lot of air to enter the pump, seriously
> > shortening it's life.
> > I don't like to let a fuel injected vehicle get below a quarter tank .
> >
> > Other causes might include a defective pressure regulator or leaks between
> > the pump and the tank outlet.
> >
> > --
> > Paul Calman, Hathaway Pines, California
--
Will Honea <whonea@codenet.net>
than from the immersion. Look where your pump sits and figure just
how much gas you need to keep it submerged - at least half a tank -
and mine sites at least 2 inches off the bottom of the tank just
because of the inlet nozzle and sock. One of the replacement pumps I
got for a GM actually had a test procedure in the instructions and the
restrictions were that it be used to pump gasoline only and that it
was never to be operated with no flow/dry.
On Wed, 5 Nov 2003 19:27:27 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Plus the pump depends on being submerged or at least sloshed on to
> prevent it from over heating.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Paul Calman wrote:
> >
> > Running near empty causes a lot of air to enter the pump, seriously
> > shortening it's life.
> > I don't like to let a fuel injected vehicle get below a quarter tank .
> >
> > Other causes might include a defective pressure regulator or leaks between
> > the pump and the tank outlet.
> >
> > --
> > Paul Calman, Hathaway Pines, California
--
Will Honea <whonea@codenet.net>
11-05-2003, 04:41 PM
#87
Guest
Posts: n/a
Re: XJ eating fuel pumps
The pump gets the largest part of it's cooling from the flow rather
than from the immersion. Look where your pump sits and figure just
how much gas you need to keep it submerged - at least half a tank -
and mine sites at least 2 inches off the bottom of the tank just
because of the inlet nozzle and sock. One of the replacement pumps I
got for a GM actually had a test procedure in the instructions and the
restrictions were that it be used to pump gasoline only and that it
was never to be operated with no flow/dry.
On Wed, 5 Nov 2003 19:27:27 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Plus the pump depends on being submerged or at least sloshed on to
> prevent it from over heating.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Paul Calman wrote:
> >
> > Running near empty causes a lot of air to enter the pump, seriously
> > shortening it's life.
> > I don't like to let a fuel injected vehicle get below a quarter tank .
> >
> > Other causes might include a defective pressure regulator or leaks between
> > the pump and the tank outlet.
> >
> > --
> > Paul Calman, Hathaway Pines, California
--
Will Honea <whonea@codenet.net>
than from the immersion. Look where your pump sits and figure just
how much gas you need to keep it submerged - at least half a tank -
and mine sites at least 2 inches off the bottom of the tank just
because of the inlet nozzle and sock. One of the replacement pumps I
got for a GM actually had a test procedure in the instructions and the
restrictions were that it be used to pump gasoline only and that it
was never to be operated with no flow/dry.
On Wed, 5 Nov 2003 19:27:27 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Plus the pump depends on being submerged or at least sloshed on to
> prevent it from over heating.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Paul Calman wrote:
> >
> > Running near empty causes a lot of air to enter the pump, seriously
> > shortening it's life.
> > I don't like to let a fuel injected vehicle get below a quarter tank .
> >
> > Other causes might include a defective pressure regulator or leaks between
> > the pump and the tank outlet.
> >
> > --
> > Paul Calman, Hathaway Pines, California
--
Will Honea <whonea@codenet.net>
11-05-2003, 04:41 PM
#88
Guest
Posts: n/a
Re: XJ eating fuel pumps
The pump gets the largest part of it's cooling from the flow rather
than from the immersion. Look where your pump sits and figure just
how much gas you need to keep it submerged - at least half a tank -
and mine sites at least 2 inches off the bottom of the tank just
because of the inlet nozzle and sock. One of the replacement pumps I
got for a GM actually had a test procedure in the instructions and the
restrictions were that it be used to pump gasoline only and that it
was never to be operated with no flow/dry.
On Wed, 5 Nov 2003 19:27:27 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Plus the pump depends on being submerged or at least sloshed on to
> prevent it from over heating.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Paul Calman wrote:
> >
> > Running near empty causes a lot of air to enter the pump, seriously
> > shortening it's life.
> > I don't like to let a fuel injected vehicle get below a quarter tank .
> >
> > Other causes might include a defective pressure regulator or leaks between
> > the pump and the tank outlet.
> >
> > --
> > Paul Calman, Hathaway Pines, California
--
Will Honea <whonea@codenet.net>
than from the immersion. Look where your pump sits and figure just
how much gas you need to keep it submerged - at least half a tank -
and mine sites at least 2 inches off the bottom of the tank just
because of the inlet nozzle and sock. One of the replacement pumps I
got for a GM actually had a test procedure in the instructions and the
restrictions were that it be used to pump gasoline only and that it
was never to be operated with no flow/dry.
On Wed, 5 Nov 2003 19:27:27 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Plus the pump depends on being submerged or at least sloshed on to
> prevent it from over heating.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Paul Calman wrote:
> >
> > Running near empty causes a lot of air to enter the pump, seriously
> > shortening it's life.
> > I don't like to let a fuel injected vehicle get below a quarter tank .
> >
> > Other causes might include a defective pressure regulator or leaks between
> > the pump and the tank outlet.
> >
> > --
> > Paul Calman, Hathaway Pines, California
--
Will Honea <whonea@codenet.net>
11-05-2003, 05:10 PM
#89
Guest
Posts: n/a
Re: XJ eating fuel pumps
I can tell you it's so tempting to use the the internal pump on our
Hot Rod applications, because there's a cazillion of the in the bone
yards, but it just won't work. Their heat must radiate down the metal
pickup tube.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Will Honea wrote:
>
> The pump gets the largest part of it's cooling from the flow rather
> than from the immersion. Look where your pump sits and figure just
> how much gas you need to keep it submerged - at least half a tank -
> and mine sites at least 2 inches off the bottom of the tank just
> because of the inlet nozzle and sock. One of the replacement pumps I
> got for a GM actually had a test procedure in the instructions and the
> restrictions were that it be used to pump gasoline only and that it
> was never to be operated with no flow/dry.
Hot Rod applications, because there's a cazillion of the in the bone
yards, but it just won't work. Their heat must radiate down the metal
pickup tube.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Will Honea wrote:
>
> The pump gets the largest part of it's cooling from the flow rather
> than from the immersion. Look where your pump sits and figure just
> how much gas you need to keep it submerged - at least half a tank -
> and mine sites at least 2 inches off the bottom of the tank just
> because of the inlet nozzle and sock. One of the replacement pumps I
> got for a GM actually had a test procedure in the instructions and the
> restrictions were that it be used to pump gasoline only and that it
> was never to be operated with no flow/dry.
11-05-2003, 05:10 PM
#90
Guest
Posts: n/a
Re: XJ eating fuel pumps
I can tell you it's so tempting to use the the internal pump on our
Hot Rod applications, because there's a cazillion of the in the bone
yards, but it just won't work. Their heat must radiate down the metal
pickup tube.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Will Honea wrote:
>
> The pump gets the largest part of it's cooling from the flow rather
> than from the immersion. Look where your pump sits and figure just
> how much gas you need to keep it submerged - at least half a tank -
> and mine sites at least 2 inches off the bottom of the tank just
> because of the inlet nozzle and sock. One of the replacement pumps I
> got for a GM actually had a test procedure in the instructions and the
> restrictions were that it be used to pump gasoline only and that it
> was never to be operated with no flow/dry.
Hot Rod applications, because there's a cazillion of the in the bone
yards, but it just won't work. Their heat must radiate down the metal
pickup tube.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Will Honea wrote:
>
> The pump gets the largest part of it's cooling from the flow rather
> than from the immersion. Look where your pump sits and figure just
> how much gas you need to keep it submerged - at least half a tank -
> and mine sites at least 2 inches off the bottom of the tank just
> because of the inlet nozzle and sock. One of the replacement pumps I
> got for a GM actually had a test procedure in the instructions and the
> restrictions were that it be used to pump gasoline only and that it
> was never to be operated with no flow/dry.