XJ Door Hinge - I'm in trouble!
04-03-2004, 06:18 PM
#71
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Mort,
Thanks for pointing out the Midpark address... it's only about two miles
from me. Is that a new location? It's about the same distance as Brafasco
and closer than Facca for me. I'll wait for your price quote and head
over... the price comparison may give me an indication of the pricing
tendency. I found the Clark Rd. store to be roughly 10% higher across the
board than Brafasco.
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:jFGbc.19584$n37.1482650@read2.cgocable.net...
: There should be 2 locations in London. One is at 500 Clarke Road and
: the other is at 105 Midpark Rd. Hope this helps. I can get you a price
: of what you should be paying on Monday. I know some stores hike prices
: for walk-ins but if you ask for a certain price they will usually give
: it to you.
: Mort
:
: Cherokee-LTD wrote:
: > I'm in London south, they're in the upper east side of the city.
: > -Brian
: >
: > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
: > : Where do you live?
: > :
: > : Cherokee-LTD wrote:
: > : > Thanks Mort - I never thought to try them for two reasons. 1.
they're
: > across
: > : > the city 2. they're not competitive price-wise. I'm more than
willing to
: > go
: > : > out of my way and pay a bit extra for PB... everybody swears by it
in
: > here
: > : > but nobody in town has ever heard of it (or at least they say so and
: > then
: > : > push their product).
: > : > -Brian
: > : >
: > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
of
: > : > : Canadian locations
: > : > :
: > : > : Kevin in San Diego wrote:
: > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
penetrating
: > oil
: > : > : > like pb blaster?
: > : > : > KH
: > : > : >
: > : > : >
: > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > : > : >
: > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
lower
: > pin
: > : > : >>WILL NOT come out! I've removed the header panel...fender...door
for
: > : > : >
: > : > : > access
: > : > : >
: > : > : >>and no luck. I ended up cutting the pin from the hinge but the
top
: > and
: > : > : >>bottom is still stuck in there... any ideas?
: > : > : >>
: > : > : >>Tried beating it out in the vice... nothing
: > : > : >>Tried drilling it out in the drill press... not even scratching
it.
: > : > : >>
: > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
: > : > ordering
: > : > : >
: > : > : > a
: > : > : >
: > : > : >>new hinge. Damn 20 minute job will have me out of commission for
: > days!
: > : > : >>
: > : > : >>-Brian
: > : > : >>
: > : > : >>
: > : > : >>
: > : > : >
: > : > : >
: > : > : >
: > : > :
: > : >
: > : >
: > :
: >
: >
:
Thanks for pointing out the Midpark address... it's only about two miles
from me. Is that a new location? It's about the same distance as Brafasco
and closer than Facca for me. I'll wait for your price quote and head
over... the price comparison may give me an indication of the pricing
tendency. I found the Clark Rd. store to be roughly 10% higher across the
board than Brafasco.
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:jFGbc.19584$n37.1482650@read2.cgocable.net...
: There should be 2 locations in London. One is at 500 Clarke Road and
: the other is at 105 Midpark Rd. Hope this helps. I can get you a price
: of what you should be paying on Monday. I know some stores hike prices
: for walk-ins but if you ask for a certain price they will usually give
: it to you.
: Mort
:
: Cherokee-LTD wrote:
: > I'm in London south, they're in the upper east side of the city.
: > -Brian
: >
: > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
: > : Where do you live?
: > :
: > : Cherokee-LTD wrote:
: > : > Thanks Mort - I never thought to try them for two reasons. 1.
they're
: > across
: > : > the city 2. they're not competitive price-wise. I'm more than
willing to
: > go
: > : > out of my way and pay a bit extra for PB... everybody swears by it
in
: > here
: > : > but nobody in town has ever heard of it (or at least they say so and
: > then
: > : > push their product).
: > : > -Brian
: > : >
: > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
of
: > : > : Canadian locations
: > : > :
: > : > : Kevin in San Diego wrote:
: > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
penetrating
: > oil
: > : > : > like pb blaster?
: > : > : > KH
: > : > : >
: > : > : >
: > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > : > : >
: > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
lower
: > pin
: > : > : >>WILL NOT come out! I've removed the header panel...fender...door
for
: > : > : >
: > : > : > access
: > : > : >
: > : > : >>and no luck. I ended up cutting the pin from the hinge but the
top
: > and
: > : > : >>bottom is still stuck in there... any ideas?
: > : > : >>
: > : > : >>Tried beating it out in the vice... nothing
: > : > : >>Tried drilling it out in the drill press... not even scratching
it.
: > : > : >>
: > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
: > : > ordering
: > : > : >
: > : > : > a
: > : > : >
: > : > : >>new hinge. Damn 20 minute job will have me out of commission for
: > days!
: > : > : >>
: > : > : >>-Brian
: > : > : >>
: > : > : >>
: > : > : >>
: > : > : >
: > : > : >
: > : > : >
: > : > :
: > : >
: > : >
: > :
: >
: >
:
04-03-2004, 06:18 PM
#72
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Mort,
Thanks for pointing out the Midpark address... it's only about two miles
from me. Is that a new location? It's about the same distance as Brafasco
and closer than Facca for me. I'll wait for your price quote and head
over... the price comparison may give me an indication of the pricing
tendency. I found the Clark Rd. store to be roughly 10% higher across the
board than Brafasco.
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:jFGbc.19584$n37.1482650@read2.cgocable.net...
: There should be 2 locations in London. One is at 500 Clarke Road and
: the other is at 105 Midpark Rd. Hope this helps. I can get you a price
: of what you should be paying on Monday. I know some stores hike prices
: for walk-ins but if you ask for a certain price they will usually give
: it to you.
: Mort
:
: Cherokee-LTD wrote:
: > I'm in London south, they're in the upper east side of the city.
: > -Brian
: >
: > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
: > : Where do you live?
: > :
: > : Cherokee-LTD wrote:
: > : > Thanks Mort - I never thought to try them for two reasons. 1.
they're
: > across
: > : > the city 2. they're not competitive price-wise. I'm more than
willing to
: > go
: > : > out of my way and pay a bit extra for PB... everybody swears by it
in
: > here
: > : > but nobody in town has ever heard of it (or at least they say so and
: > then
: > : > push their product).
: > : > -Brian
: > : >
: > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
of
: > : > : Canadian locations
: > : > :
: > : > : Kevin in San Diego wrote:
: > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
penetrating
: > oil
: > : > : > like pb blaster?
: > : > : > KH
: > : > : >
: > : > : >
: > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > : > : >
: > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
lower
: > pin
: > : > : >>WILL NOT come out! I've removed the header panel...fender...door
for
: > : > : >
: > : > : > access
: > : > : >
: > : > : >>and no luck. I ended up cutting the pin from the hinge but the
top
: > and
: > : > : >>bottom is still stuck in there... any ideas?
: > : > : >>
: > : > : >>Tried beating it out in the vice... nothing
: > : > : >>Tried drilling it out in the drill press... not even scratching
it.
: > : > : >>
: > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
: > : > ordering
: > : > : >
: > : > : > a
: > : > : >
: > : > : >>new hinge. Damn 20 minute job will have me out of commission for
: > days!
: > : > : >>
: > : > : >>-Brian
: > : > : >>
: > : > : >>
: > : > : >>
: > : > : >
: > : > : >
: > : > : >
: > : > :
: > : >
: > : >
: > :
: >
: >
:
Thanks for pointing out the Midpark address... it's only about two miles
from me. Is that a new location? It's about the same distance as Brafasco
and closer than Facca for me. I'll wait for your price quote and head
over... the price comparison may give me an indication of the pricing
tendency. I found the Clark Rd. store to be roughly 10% higher across the
board than Brafasco.
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:jFGbc.19584$n37.1482650@read2.cgocable.net...
: There should be 2 locations in London. One is at 500 Clarke Road and
: the other is at 105 Midpark Rd. Hope this helps. I can get you a price
: of what you should be paying on Monday. I know some stores hike prices
: for walk-ins but if you ask for a certain price they will usually give
: it to you.
: Mort
:
: Cherokee-LTD wrote:
: > I'm in London south, they're in the upper east side of the city.
: > -Brian
: >
: > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
: > : Where do you live?
: > :
: > : Cherokee-LTD wrote:
: > : > Thanks Mort - I never thought to try them for two reasons. 1.
they're
: > across
: > : > the city 2. they're not competitive price-wise. I'm more than
willing to
: > go
: > : > out of my way and pay a bit extra for PB... everybody swears by it
in
: > here
: > : > but nobody in town has ever heard of it (or at least they say so and
: > then
: > : > push their product).
: > : > -Brian
: > : >
: > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
of
: > : > : Canadian locations
: > : > :
: > : > : Kevin in San Diego wrote:
: > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
penetrating
: > oil
: > : > : > like pb blaster?
: > : > : > KH
: > : > : >
: > : > : >
: > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > : > : >
: > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
lower
: > pin
: > : > : >>WILL NOT come out! I've removed the header panel...fender...door
for
: > : > : >
: > : > : > access
: > : > : >
: > : > : >>and no luck. I ended up cutting the pin from the hinge but the
top
: > and
: > : > : >>bottom is still stuck in there... any ideas?
: > : > : >>
: > : > : >>Tried beating it out in the vice... nothing
: > : > : >>Tried drilling it out in the drill press... not even scratching
it.
: > : > : >>
: > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
: > : > ordering
: > : > : >
: > : > : > a
: > : > : >
: > : > : >>new hinge. Damn 20 minute job will have me out of commission for
: > days!
: > : > : >>
: > : > : >>-Brian
: > : > : >>
: > : > : >>
: > : > : >>
: > : > : >
: > : > : >
: > : > : >
: > : > :
: > : >
: > : >
: > :
: >
: >
:
04-03-2004, 06:18 PM
#73
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Mort,
Thanks for pointing out the Midpark address... it's only about two miles
from me. Is that a new location? It's about the same distance as Brafasco
and closer than Facca for me. I'll wait for your price quote and head
over... the price comparison may give me an indication of the pricing
tendency. I found the Clark Rd. store to be roughly 10% higher across the
board than Brafasco.
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:jFGbc.19584$n37.1482650@read2.cgocable.net...
: There should be 2 locations in London. One is at 500 Clarke Road and
: the other is at 105 Midpark Rd. Hope this helps. I can get you a price
: of what you should be paying on Monday. I know some stores hike prices
: for walk-ins but if you ask for a certain price they will usually give
: it to you.
: Mort
:
: Cherokee-LTD wrote:
: > I'm in London south, they're in the upper east side of the city.
: > -Brian
: >
: > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
: > : Where do you live?
: > :
: > : Cherokee-LTD wrote:
: > : > Thanks Mort - I never thought to try them for two reasons. 1.
they're
: > across
: > : > the city 2. they're not competitive price-wise. I'm more than
willing to
: > go
: > : > out of my way and pay a bit extra for PB... everybody swears by it
in
: > here
: > : > but nobody in town has ever heard of it (or at least they say so and
: > then
: > : > push their product).
: > : > -Brian
: > : >
: > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
of
: > : > : Canadian locations
: > : > :
: > : > : Kevin in San Diego wrote:
: > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
penetrating
: > oil
: > : > : > like pb blaster?
: > : > : > KH
: > : > : >
: > : > : >
: > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > : > : >
: > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
lower
: > pin
: > : > : >>WILL NOT come out! I've removed the header panel...fender...door
for
: > : > : >
: > : > : > access
: > : > : >
: > : > : >>and no luck. I ended up cutting the pin from the hinge but the
top
: > and
: > : > : >>bottom is still stuck in there... any ideas?
: > : > : >>
: > : > : >>Tried beating it out in the vice... nothing
: > : > : >>Tried drilling it out in the drill press... not even scratching
it.
: > : > : >>
: > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
: > : > ordering
: > : > : >
: > : > : > a
: > : > : >
: > : > : >>new hinge. Damn 20 minute job will have me out of commission for
: > days!
: > : > : >>
: > : > : >>-Brian
: > : > : >>
: > : > : >>
: > : > : >>
: > : > : >
: > : > : >
: > : > : >
: > : > :
: > : >
: > : >
: > :
: >
: >
:
Thanks for pointing out the Midpark address... it's only about two miles
from me. Is that a new location? It's about the same distance as Brafasco
and closer than Facca for me. I'll wait for your price quote and head
over... the price comparison may give me an indication of the pricing
tendency. I found the Clark Rd. store to be roughly 10% higher across the
board than Brafasco.
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:jFGbc.19584$n37.1482650@read2.cgocable.net...
: There should be 2 locations in London. One is at 500 Clarke Road and
: the other is at 105 Midpark Rd. Hope this helps. I can get you a price
: of what you should be paying on Monday. I know some stores hike prices
: for walk-ins but if you ask for a certain price they will usually give
: it to you.
: Mort
:
: Cherokee-LTD wrote:
: > I'm in London south, they're in the upper east side of the city.
: > -Brian
: >
: > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
: > : Where do you live?
: > :
: > : Cherokee-LTD wrote:
: > : > Thanks Mort - I never thought to try them for two reasons. 1.
they're
: > across
: > : > the city 2. they're not competitive price-wise. I'm more than
willing to
: > go
: > : > out of my way and pay a bit extra for PB... everybody swears by it
in
: > here
: > : > but nobody in town has ever heard of it (or at least they say so and
: > then
: > : > push their product).
: > : > -Brian
: > : >
: > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
of
: > : > : Canadian locations
: > : > :
: > : > : Kevin in San Diego wrote:
: > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
penetrating
: > oil
: > : > : > like pb blaster?
: > : > : > KH
: > : > : >
: > : > : >
: > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > : > : >
: > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
lower
: > pin
: > : > : >>WILL NOT come out! I've removed the header panel...fender...door
for
: > : > : >
: > : > : > access
: > : > : >
: > : > : >>and no luck. I ended up cutting the pin from the hinge but the
top
: > and
: > : > : >>bottom is still stuck in there... any ideas?
: > : > : >>
: > : > : >>Tried beating it out in the vice... nothing
: > : > : >>Tried drilling it out in the drill press... not even scratching
it.
: > : > : >>
: > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
: > : > ordering
: > : > : >
: > : > : > a
: > : > : >
: > : > : >>new hinge. Damn 20 minute job will have me out of commission for
: > days!
: > : > : >>
: > : > : >>-Brian
: > : > : >>
: > : > : >>
: > : > : >>
: > : > : >
: > : > : >
: > : > : >
: > : > :
: > : >
: > : >
: > :
: >
: >
:
04-03-2004, 09:34 PM
#74
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
I imagine they dont sell a lot of loctite there lol.
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:406F2266.44BC5F3F@sympatico.ca...
> : Don't ya just love the 'extras' of living in the salt belt....
> : ;-)
> :
> Don't you know it!!!
> The only benefit is that when you install something you don't have to
> re-torque a week later, it's already rusted in place. I can't wait until I
> do the lift kit (it's in the garage waiting for me now)... I suspect I
will
> be exercising the lifetime warranty on my Torx sockets.
> -Brian
>
>
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:406F2266.44BC5F3F@sympatico.ca...
> : Don't ya just love the 'extras' of living in the salt belt....
> : ;-)
> :
> Don't you know it!!!
> The only benefit is that when you install something you don't have to
> re-torque a week later, it's already rusted in place. I can't wait until I
> do the lift kit (it's in the garage waiting for me now)... I suspect I
will
> be exercising the lifetime warranty on my Torx sockets.
> -Brian
>
>
04-03-2004, 09:34 PM
#75
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
I imagine they dont sell a lot of loctite there lol.
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:406F2266.44BC5F3F@sympatico.ca...
> : Don't ya just love the 'extras' of living in the salt belt....
> : ;-)
> :
> Don't you know it!!!
> The only benefit is that when you install something you don't have to
> re-torque a week later, it's already rusted in place. I can't wait until I
> do the lift kit (it's in the garage waiting for me now)... I suspect I
will
> be exercising the lifetime warranty on my Torx sockets.
> -Brian
>
>
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:406F2266.44BC5F3F@sympatico.ca...
> : Don't ya just love the 'extras' of living in the salt belt....
> : ;-)
> :
> Don't you know it!!!
> The only benefit is that when you install something you don't have to
> re-torque a week later, it's already rusted in place. I can't wait until I
> do the lift kit (it's in the garage waiting for me now)... I suspect I
will
> be exercising the lifetime warranty on my Torx sockets.
> -Brian
>
>
04-03-2004, 09:34 PM
#76
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
I imagine they dont sell a lot of loctite there lol.
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:406F2266.44BC5F3F@sympatico.ca...
> : Don't ya just love the 'extras' of living in the salt belt....
> : ;-)
> :
> Don't you know it!!!
> The only benefit is that when you install something you don't have to
> re-torque a week later, it's already rusted in place. I can't wait until I
> do the lift kit (it's in the garage waiting for me now)... I suspect I
will
> be exercising the lifetime warranty on my Torx sockets.
> -Brian
>
>
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:406F2266.44BC5F3F@sympatico.ca...
> : Don't ya just love the 'extras' of living in the salt belt....
> : ;-)
> :
> Don't you know it!!!
> The only benefit is that when you install something you don't have to
> re-torque a week later, it's already rusted in place. I can't wait until I
> do the lift kit (it's in the garage waiting for me now)... I suspect I
will
> be exercising the lifetime warranty on my Torx sockets.
> -Brian
>
>
04-03-2004, 09:34 PM
#77
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
I imagine they dont sell a lot of loctite there lol.
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:406F2266.44BC5F3F@sympatico.ca...
> : Don't ya just love the 'extras' of living in the salt belt....
> : ;-)
> :
> Don't you know it!!!
> The only benefit is that when you install something you don't have to
> re-torque a week later, it's already rusted in place. I can't wait until I
> do the lift kit (it's in the garage waiting for me now)... I suspect I
will
> be exercising the lifetime warranty on my Torx sockets.
> -Brian
>
>
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:406F2266.44BC5F3F@sympatico.ca...
> : Don't ya just love the 'extras' of living in the salt belt....
> : ;-)
> :
> Don't you know it!!!
> The only benefit is that when you install something you don't have to
> re-torque a week later, it's already rusted in place. I can't wait until I
> do the lift kit (it's in the garage waiting for me now)... I suspect I
will
> be exercising the lifetime warranty on my Torx sockets.
> -Brian
>
>
04-04-2004, 12:18 AM
#78
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:TuKbc.18598$Rh.13309@fed1read05...
: I imagine they dont sell a lot of loctite there lol.
: KH
:
On the downside, anti-seize is trading for $426.00 US/ounce.
-Brian
04-04-2004, 12:18 AM
#79
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:TuKbc.18598$Rh.13309@fed1read05...
: I imagine they dont sell a lot of loctite there lol.
: KH
:
On the downside, anti-seize is trading for $426.00 US/ounce.
-Brian
04-04-2004, 12:18 AM
#80
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:TuKbc.18598$Rh.13309@fed1read05...
: I imagine they dont sell a lot of loctite there lol.
: KH
:
On the downside, anti-seize is trading for $426.00 US/ounce.
-Brian
