XJ Door Hinge - I'm in trouble!
04-02-2004, 11:47 PM
#1
Guest
Posts: n/a
XJ Door Hinge - I'm in trouble!
I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
WILL NOT come out! I've removed the header panel...fender...door for access
and no luck. I ended up cutting the pin from the hinge but the top and
bottom is still stuck in there... any ideas?
Tried beating it out in the vice... nothing
Tried drilling it out in the drill press... not even scratching it.
I'm going to try some heat tomorrow but I have a feeling I'll be ordering a
new hinge. Damn 20 minute job will have me out of commission for days!
-Brian
WILL NOT come out! I've removed the header panel...fender...door for access
and no luck. I ended up cutting the pin from the hinge but the top and
bottom is still stuck in there... any ideas?
Tried beating it out in the vice... nothing
Tried drilling it out in the drill press... not even scratching it.
I'm going to try some heat tomorrow but I have a feeling I'll be ordering a
new hinge. Damn 20 minute job will have me out of commission for days!
-Brian
04-03-2004, 12:31 AM
#2
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
like pb blaster?
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> WILL NOT come out! I've removed the header panel...fender...door for
access
> and no luck. I ended up cutting the pin from the hinge but the top and
> bottom is still stuck in there... any ideas?
>
> Tried beating it out in the vice... nothing
> Tried drilling it out in the drill press... not even scratching it.
>
> I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
> new hinge. Damn 20 minute job will have me out of commission for days!
>
> -Brian
>
>
>
like pb blaster?
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> WILL NOT come out! I've removed the header panel...fender...door for
access
> and no luck. I ended up cutting the pin from the hinge but the top and
> bottom is still stuck in there... any ideas?
>
> Tried beating it out in the vice... nothing
> Tried drilling it out in the drill press... not even scratching it.
>
> I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
> new hinge. Damn 20 minute job will have me out of commission for days!
>
> -Brian
>
>
>
04-03-2004, 12:31 AM
#3
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
like pb blaster?
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> WILL NOT come out! I've removed the header panel...fender...door for
access
> and no luck. I ended up cutting the pin from the hinge but the top and
> bottom is still stuck in there... any ideas?
>
> Tried beating it out in the vice... nothing
> Tried drilling it out in the drill press... not even scratching it.
>
> I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
> new hinge. Damn 20 minute job will have me out of commission for days!
>
> -Brian
>
>
>
like pb blaster?
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> WILL NOT come out! I've removed the header panel...fender...door for
access
> and no luck. I ended up cutting the pin from the hinge but the top and
> bottom is still stuck in there... any ideas?
>
> Tried beating it out in the vice... nothing
> Tried drilling it out in the drill press... not even scratching it.
>
> I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
> new hinge. Damn 20 minute job will have me out of commission for days!
>
> -Brian
>
>
>
04-03-2004, 12:31 AM
#4
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
like pb blaster?
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> WILL NOT come out! I've removed the header panel...fender...door for
access
> and no luck. I ended up cutting the pin from the hinge but the top and
> bottom is still stuck in there... any ideas?
>
> Tried beating it out in the vice... nothing
> Tried drilling it out in the drill press... not even scratching it.
>
> I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
> new hinge. Damn 20 minute job will have me out of commission for days!
>
> -Brian
>
>
>
like pb blaster?
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> WILL NOT come out! I've removed the header panel...fender...door for
access
> and no luck. I ended up cutting the pin from the hinge but the top and
> bottom is still stuck in there... any ideas?
>
> Tried beating it out in the vice... nothing
> Tried drilling it out in the drill press... not even scratching it.
>
> I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
> new hinge. Damn 20 minute job will have me out of commission for days!
>
> -Brian
>
>
>
04-03-2004, 12:31 AM
#5
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
like pb blaster?
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> WILL NOT come out! I've removed the header panel...fender...door for
access
> and no luck. I ended up cutting the pin from the hinge but the top and
> bottom is still stuck in there... any ideas?
>
> Tried beating it out in the vice... nothing
> Tried drilling it out in the drill press... not even scratching it.
>
> I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
> new hinge. Damn 20 minute job will have me out of commission for days!
>
> -Brian
>
>
>
like pb blaster?
KH
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> WILL NOT come out! I've removed the header panel...fender...door for
access
> and no luck. I ended up cutting the pin from the hinge but the top and
> bottom is still stuck in there... any ideas?
>
> Tried beating it out in the vice... nothing
> Tried drilling it out in the drill press... not even scratching it.
>
> I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
> new hinge. Damn 20 minute job will have me out of commission for days!
>
> -Brian
>
>
>
04-03-2004, 12:43 AM
#6
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
We can't get PB in Canada (to the best of my knowledge)... I have doused it
in WD40 but I'm going to get some good stuff tomorrow. I'm going to need it
for the lift install anyway. Might go doorless tomorrow if it's not raining
LOL.
-Brian
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:x_rbc.18228$Rh.8976@fed1read05...
: LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: like pb blaster?
: KH
:
:
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
in WD40 but I'm going to get some good stuff tomorrow. I'm going to need it
for the lift install anyway. Might go doorless tomorrow if it's not raining
LOL.
-Brian
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:x_rbc.18228$Rh.8976@fed1read05...
: LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: like pb blaster?
: KH
:
:
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
04-03-2004, 12:43 AM
#7
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
We can't get PB in Canada (to the best of my knowledge)... I have doused it
in WD40 but I'm going to get some good stuff tomorrow. I'm going to need it
for the lift install anyway. Might go doorless tomorrow if it's not raining
LOL.
-Brian
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:x_rbc.18228$Rh.8976@fed1read05...
: LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: like pb blaster?
: KH
:
:
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
in WD40 but I'm going to get some good stuff tomorrow. I'm going to need it
for the lift install anyway. Might go doorless tomorrow if it's not raining
LOL.
-Brian
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:x_rbc.18228$Rh.8976@fed1read05...
: LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: like pb blaster?
: KH
:
:
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
04-03-2004, 12:43 AM
#8
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
We can't get PB in Canada (to the best of my knowledge)... I have doused it
in WD40 but I'm going to get some good stuff tomorrow. I'm going to need it
for the lift install anyway. Might go doorless tomorrow if it's not raining
LOL.
-Brian
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:x_rbc.18228$Rh.8976@fed1read05...
: LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: like pb blaster?
: KH
:
:
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
in WD40 but I'm going to get some good stuff tomorrow. I'm going to need it
for the lift install anyway. Might go doorless tomorrow if it's not raining
LOL.
-Brian
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:x_rbc.18228$Rh.8976@fed1read05...
: LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: like pb blaster?
: KH
:
:
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
04-03-2004, 12:43 AM
#9
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
We can't get PB in Canada (to the best of my knowledge)... I have doused it
in WD40 but I'm going to get some good stuff tomorrow. I'm going to need it
for the lift install anyway. Might go doorless tomorrow if it's not raining
LOL.
-Brian
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:x_rbc.18228$Rh.8976@fed1read05...
: LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: like pb blaster?
: KH
:
:
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
in WD40 but I'm going to get some good stuff tomorrow. I'm going to need it
for the lift install anyway. Might go doorless tomorrow if it's not raining
LOL.
-Brian
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:x_rbc.18228$Rh.8976@fed1read05...
: LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: like pb blaster?
: KH
:
:
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
04-03-2004, 08:30 AM
#10
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Instead of beating on it put in a vise or a press, place a small socket on
one end and a straight drift punch on the other squeeze with even pressure
it will come out.
--
HarryS
JAFGBR
JAFTJO
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> WILL NOT come out! I've removed the header panel...fender...door for
access
> and no luck. I ended up cutting the pin from the hinge but the top and
> bottom is still stuck in there... any ideas?
>
> Tried beating it out in the vice... nothing
> Tried drilling it out in the drill press... not even scratching it.
>
> I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
> new hinge. Damn 20 minute job will have me out of commission for days!
>
> -Brian
>
>
>
one end and a straight drift punch on the other squeeze with even pressure
it will come out.
--
HarryS
JAFGBR
JAFTJO
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> WILL NOT come out! I've removed the header panel...fender...door for
access
> and no luck. I ended up cutting the pin from the hinge but the top and
> bottom is still stuck in there... any ideas?
>
> Tried beating it out in the vice... nothing
> Tried drilling it out in the drill press... not even scratching it.
>
> I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
> new hinge. Damn 20 minute job will have me out of commission for days!
>
> -Brian
>
>
>