XJ Door Hinge - I'm in trouble!
04-03-2004, 09:11 AM
#21
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Canadian tire sell 'liquid wrench' which isn't bad.
My wife recently got me some Krown KP 53 penetrating fluid from Home
Hardware and it seems to work really well.
As you have found out, WD40 only displaces water, it is a very poor
penetrant. Brake fluid is 'way' better as a penetrant if you are
desperate.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Cherokee-LTD wrote:
>
> We can't get PB in Canada (to the best of my knowledge)... I have doused it
> in WD40 but I'm going to get some good stuff tomorrow. I'm going to need it
> for the lift install anyway. Might go doorless tomorrow if it's not raining
> LOL.
> -Brian
>
> "Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
> news:x_rbc.18228$Rh.8976@fed1read05...
> : LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> : like pb blaster?
> : KH
> :
> :
> : "Cherokee-LTD" <spammenot@home.com> wrote in message
> : news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> : > WILL NOT come out! I've removed the header panel...fender...door for
> : access
> : > and no luck. I ended up cutting the pin from the hinge but the top and
> : > bottom is still stuck in there... any ideas?
> : >
> : > Tried beating it out in the vice... nothing
> : > Tried drilling it out in the drill press... not even scratching it.
> : >
> : > I'm going to try some heat tomorrow but I have a feeling I'll be
> ordering
> : a
> : > new hinge. Damn 20 minute job will have me out of commission for days!
> : >
> : > -Brian
> : >
> : >
> : >
> :
> :
My wife recently got me some Krown KP 53 penetrating fluid from Home
Hardware and it seems to work really well.
As you have found out, WD40 only displaces water, it is a very poor
penetrant. Brake fluid is 'way' better as a penetrant if you are
desperate.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Cherokee-LTD wrote:
>
> We can't get PB in Canada (to the best of my knowledge)... I have doused it
> in WD40 but I'm going to get some good stuff tomorrow. I'm going to need it
> for the lift install anyway. Might go doorless tomorrow if it's not raining
> LOL.
> -Brian
>
> "Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
> news:x_rbc.18228$Rh.8976@fed1read05...
> : LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> : like pb blaster?
> : KH
> :
> :
> : "Cherokee-LTD" <spammenot@home.com> wrote in message
> : news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> : > WILL NOT come out! I've removed the header panel...fender...door for
> : access
> : > and no luck. I ended up cutting the pin from the hinge but the top and
> : > bottom is still stuck in there... any ideas?
> : >
> : > Tried beating it out in the vice... nothing
> : > Tried drilling it out in the drill press... not even scratching it.
> : >
> : > I'm going to try some heat tomorrow but I have a feeling I'll be
> ordering
> : a
> : > new hinge. Damn 20 minute job will have me out of commission for days!
> : >
> : > -Brian
> : >
> : >
> : >
> :
> :
04-03-2004, 11:37 AM
#22
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Harry,
I tried pressing it out while it was mounted with a mini vice.. 4.5mm socket
as the 'die' and a 10mm socket as a spacer on the head end... no luck. With
the part cut off, I can't do it in a press because of the U shape... it will
crush the part. I tried bridging the gap as well. This puppy is frozen
solid.
Time to call the dealer or cut one off at the wrecker.
-Brian
"HarryS" <harry-s@comcast.net> wrote in message
news:_KSdnS7shovwIfPdRVn-uQ@comcast.com...
: Instead of beating on it put in a vise or a press, place a small socket on
: one end and a straight drift punch on the other squeeze with even pressure
: it will come out.
:
: --
: HarryS
: JAFGBR
: JAFTJO
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
I tried pressing it out while it was mounted with a mini vice.. 4.5mm socket
as the 'die' and a 10mm socket as a spacer on the head end... no luck. With
the part cut off, I can't do it in a press because of the U shape... it will
crush the part. I tried bridging the gap as well. This puppy is frozen
solid.
Time to call the dealer or cut one off at the wrecker.
-Brian
"HarryS" <harry-s@comcast.net> wrote in message
news:_KSdnS7shovwIfPdRVn-uQ@comcast.com...
: Instead of beating on it put in a vise or a press, place a small socket on
: one end and a straight drift punch on the other squeeze with even pressure
: it will come out.
:
: --
: HarryS
: JAFGBR
: JAFTJO
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
04-03-2004, 11:37 AM
#23
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Harry,
I tried pressing it out while it was mounted with a mini vice.. 4.5mm socket
as the 'die' and a 10mm socket as a spacer on the head end... no luck. With
the part cut off, I can't do it in a press because of the U shape... it will
crush the part. I tried bridging the gap as well. This puppy is frozen
solid.
Time to call the dealer or cut one off at the wrecker.
-Brian
"HarryS" <harry-s@comcast.net> wrote in message
news:_KSdnS7shovwIfPdRVn-uQ@comcast.com...
: Instead of beating on it put in a vise or a press, place a small socket on
: one end and a straight drift punch on the other squeeze with even pressure
: it will come out.
:
: --
: HarryS
: JAFGBR
: JAFTJO
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
I tried pressing it out while it was mounted with a mini vice.. 4.5mm socket
as the 'die' and a 10mm socket as a spacer on the head end... no luck. With
the part cut off, I can't do it in a press because of the U shape... it will
crush the part. I tried bridging the gap as well. This puppy is frozen
solid.
Time to call the dealer or cut one off at the wrecker.
-Brian
"HarryS" <harry-s@comcast.net> wrote in message
news:_KSdnS7shovwIfPdRVn-uQ@comcast.com...
: Instead of beating on it put in a vise or a press, place a small socket on
: one end and a straight drift punch on the other squeeze with even pressure
: it will come out.
:
: --
: HarryS
: JAFGBR
: JAFTJO
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
04-03-2004, 11:37 AM
#24
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Harry,
I tried pressing it out while it was mounted with a mini vice.. 4.5mm socket
as the 'die' and a 10mm socket as a spacer on the head end... no luck. With
the part cut off, I can't do it in a press because of the U shape... it will
crush the part. I tried bridging the gap as well. This puppy is frozen
solid.
Time to call the dealer or cut one off at the wrecker.
-Brian
"HarryS" <harry-s@comcast.net> wrote in message
news:_KSdnS7shovwIfPdRVn-uQ@comcast.com...
: Instead of beating on it put in a vise or a press, place a small socket on
: one end and a straight drift punch on the other squeeze with even pressure
: it will come out.
:
: --
: HarryS
: JAFGBR
: JAFTJO
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
I tried pressing it out while it was mounted with a mini vice.. 4.5mm socket
as the 'die' and a 10mm socket as a spacer on the head end... no luck. With
the part cut off, I can't do it in a press because of the U shape... it will
crush the part. I tried bridging the gap as well. This puppy is frozen
solid.
Time to call the dealer or cut one off at the wrecker.
-Brian
"HarryS" <harry-s@comcast.net> wrote in message
news:_KSdnS7shovwIfPdRVn-uQ@comcast.com...
: Instead of beating on it put in a vise or a press, place a small socket on
: one end and a straight drift punch on the other squeeze with even pressure
: it will come out.
:
: --
: HarryS
: JAFGBR
: JAFTJO
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
04-03-2004, 11:37 AM
#25
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Harry,
I tried pressing it out while it was mounted with a mini vice.. 4.5mm socket
as the 'die' and a 10mm socket as a spacer on the head end... no luck. With
the part cut off, I can't do it in a press because of the U shape... it will
crush the part. I tried bridging the gap as well. This puppy is frozen
solid.
Time to call the dealer or cut one off at the wrecker.
-Brian
"HarryS" <harry-s@comcast.net> wrote in message
news:_KSdnS7shovwIfPdRVn-uQ@comcast.com...
: Instead of beating on it put in a vise or a press, place a small socket on
: one end and a straight drift punch on the other squeeze with even pressure
: it will come out.
:
: --
: HarryS
: JAFGBR
: JAFTJO
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
I tried pressing it out while it was mounted with a mini vice.. 4.5mm socket
as the 'die' and a 10mm socket as a spacer on the head end... no luck. With
the part cut off, I can't do it in a press because of the U shape... it will
crush the part. I tried bridging the gap as well. This puppy is frozen
solid.
Time to call the dealer or cut one off at the wrecker.
-Brian
"HarryS" <harry-s@comcast.net> wrote in message
news:_KSdnS7shovwIfPdRVn-uQ@comcast.com...
: Instead of beating on it put in a vise or a press, place a small socket on
: one end and a straight drift punch on the other squeeze with even pressure
: it will come out.
:
: --
: HarryS
: JAFGBR
: JAFTJO
: "Cherokee-LTD" <spammenot@home.com> wrote in message
: news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: > WILL NOT come out! I've removed the header panel...fender...door for
: access
: > and no luck. I ended up cutting the pin from the hinge but the top and
: > bottom is still stuck in there... any ideas?
: >
: > Tried beating it out in the vice... nothing
: > Tried drilling it out in the drill press... not even scratching it.
: >
: > I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: a
: > new hinge. Damn 20 minute job will have me out of commission for days!
: >
: > -Brian
: >
: >
: >
:
:
04-03-2004, 01:15 PM
#26
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
You can buy PB Blaster in Canada visit www.fastenal.com for a list of
Canadian locations
Kevin in San Diego wrote:
> LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> like pb blaster?
> KH
>
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
>
>>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
>>WILL NOT come out! I've removed the header panel...fender...door for
>
> access
>
>>and no luck. I ended up cutting the pin from the hinge but the top and
>>bottom is still stuck in there... any ideas?
>>
>>Tried beating it out in the vice... nothing
>>Tried drilling it out in the drill press... not even scratching it.
>>
>>I'm going to try some heat tomorrow but I have a feeling I'll be ordering
>
> a
>
>>new hinge. Damn 20 minute job will have me out of commission for days!
>>
>>-Brian
>>
>>
>>
>
>
>
Canadian locations
Kevin in San Diego wrote:
> LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> like pb blaster?
> KH
>
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
>
>>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
>>WILL NOT come out! I've removed the header panel...fender...door for
>
> access
>
>>and no luck. I ended up cutting the pin from the hinge but the top and
>>bottom is still stuck in there... any ideas?
>>
>>Tried beating it out in the vice... nothing
>>Tried drilling it out in the drill press... not even scratching it.
>>
>>I'm going to try some heat tomorrow but I have a feeling I'll be ordering
>
> a
>
>>new hinge. Damn 20 minute job will have me out of commission for days!
>>
>>-Brian
>>
>>
>>
>
>
>
04-03-2004, 01:15 PM
#27
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
You can buy PB Blaster in Canada visit www.fastenal.com for a list of
Canadian locations
Kevin in San Diego wrote:
> LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> like pb blaster?
> KH
>
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
>
>>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
>>WILL NOT come out! I've removed the header panel...fender...door for
>
> access
>
>>and no luck. I ended up cutting the pin from the hinge but the top and
>>bottom is still stuck in there... any ideas?
>>
>>Tried beating it out in the vice... nothing
>>Tried drilling it out in the drill press... not even scratching it.
>>
>>I'm going to try some heat tomorrow but I have a feeling I'll be ordering
>
> a
>
>>new hinge. Damn 20 minute job will have me out of commission for days!
>>
>>-Brian
>>
>>
>>
>
>
>
Canadian locations
Kevin in San Diego wrote:
> LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> like pb blaster?
> KH
>
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
>
>>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
>>WILL NOT come out! I've removed the header panel...fender...door for
>
> access
>
>>and no luck. I ended up cutting the pin from the hinge but the top and
>>bottom is still stuck in there... any ideas?
>>
>>Tried beating it out in the vice... nothing
>>Tried drilling it out in the drill press... not even scratching it.
>>
>>I'm going to try some heat tomorrow but I have a feeling I'll be ordering
>
> a
>
>>new hinge. Damn 20 minute job will have me out of commission for days!
>>
>>-Brian
>>
>>
>>
>
>
>
04-03-2004, 01:15 PM
#28
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
You can buy PB Blaster in Canada visit www.fastenal.com for a list of
Canadian locations
Kevin in San Diego wrote:
> LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> like pb blaster?
> KH
>
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
>
>>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
>>WILL NOT come out! I've removed the header panel...fender...door for
>
> access
>
>>and no luck. I ended up cutting the pin from the hinge but the top and
>>bottom is still stuck in there... any ideas?
>>
>>Tried beating it out in the vice... nothing
>>Tried drilling it out in the drill press... not even scratching it.
>>
>>I'm going to try some heat tomorrow but I have a feeling I'll be ordering
>
> a
>
>>new hinge. Damn 20 minute job will have me out of commission for days!
>>
>>-Brian
>>
>>
>>
>
>
>
Canadian locations
Kevin in San Diego wrote:
> LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> like pb blaster?
> KH
>
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
>
>>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
>>WILL NOT come out! I've removed the header panel...fender...door for
>
> access
>
>>and no luck. I ended up cutting the pin from the hinge but the top and
>>bottom is still stuck in there... any ideas?
>>
>>Tried beating it out in the vice... nothing
>>Tried drilling it out in the drill press... not even scratching it.
>>
>>I'm going to try some heat tomorrow but I have a feeling I'll be ordering
>
> a
>
>>new hinge. Damn 20 minute job will have me out of commission for days!
>>
>>-Brian
>>
>>
>>
>
>
>
04-03-2004, 01:15 PM
#29
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
You can buy PB Blaster in Canada visit www.fastenal.com for a list of
Canadian locations
Kevin in San Diego wrote:
> LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> like pb blaster?
> KH
>
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
>
>>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
>>WILL NOT come out! I've removed the header panel...fender...door for
>
> access
>
>>and no luck. I ended up cutting the pin from the hinge but the top and
>>bottom is still stuck in there... any ideas?
>>
>>Tried beating it out in the vice... nothing
>>Tried drilling it out in the drill press... not even scratching it.
>>
>>I'm going to try some heat tomorrow but I have a feeling I'll be ordering
>
> a
>
>>new hinge. Damn 20 minute job will have me out of commission for days!
>>
>>-Brian
>>
>>
>>
>
>
>
Canadian locations
Kevin in San Diego wrote:
> LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> like pb blaster?
> KH
>
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
>
>>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
>>WILL NOT come out! I've removed the header panel...fender...door for
>
> access
>
>>and no luck. I ended up cutting the pin from the hinge but the top and
>>bottom is still stuck in there... any ideas?
>>
>>Tried beating it out in the vice... nothing
>>Tried drilling it out in the drill press... not even scratching it.
>>
>>I'm going to try some heat tomorrow but I have a feeling I'll be ordering
>
> a
>
>>new hinge. Damn 20 minute job will have me out of commission for days!
>>
>>-Brian
>>
>>
>>
>
>
>
04-03-2004, 03:22 PM
#30
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Where do you live?
Cherokee-LTD wrote:
> Thanks Mort - I never thought to try them for two reasons. 1. they're across
> the city 2. they're not competitive price-wise. I'm more than willing to go
> out of my way and pay a bit extra for PB... everybody swears by it in here
> but nobody in town has ever heard of it (or at least they say so and then
> push their product).
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : You can buy PB Blaster in Canada visit www.fastenal.com for a list of
> : Canadian locations
> :
> : Kevin in San Diego wrote:
> : > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> : > like pb blaster?
> : > KH
> : >
> : >
> : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : >
> : >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> : >>WILL NOT come out! I've removed the header panel...fender...door for
> : >
> : > access
> : >
> : >>and no luck. I ended up cutting the pin from the hinge but the top and
> : >>bottom is still stuck in there... any ideas?
> : >>
> : >>Tried beating it out in the vice... nothing
> : >>Tried drilling it out in the drill press... not even scratching it.
> : >>
> : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> ordering
> : >
> : > a
> : >
> : >>new hinge. Damn 20 minute job will have me out of commission for days!
> : >>
> : >>-Brian
> : >>
> : >>
> : >>
> : >
> : >
> : >
> :
>
>
Cherokee-LTD wrote:
> Thanks Mort - I never thought to try them for two reasons. 1. they're across
> the city 2. they're not competitive price-wise. I'm more than willing to go
> out of my way and pay a bit extra for PB... everybody swears by it in here
> but nobody in town has ever heard of it (or at least they say so and then
> push their product).
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : You can buy PB Blaster in Canada visit www.fastenal.com for a list of
> : Canadian locations
> :
> : Kevin in San Diego wrote:
> : > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> : > like pb blaster?
> : > KH
> : >
> : >
> : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : >
> : >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> : >>WILL NOT come out! I've removed the header panel...fender...door for
> : >
> : > access
> : >
> : >>and no luck. I ended up cutting the pin from the hinge but the top and
> : >>bottom is still stuck in there... any ideas?
> : >>
> : >>Tried beating it out in the vice... nothing
> : >>Tried drilling it out in the drill press... not even scratching it.
> : >>
> : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> ordering
> : >
> : > a
> : >
> : >>new hinge. Damn 20 minute job will have me out of commission for days!
> : >>
> : >>-Brian
> : >>
> : >>
> : >>
> : >
> : >
> : >
> :
>
>
