WTB 3.73 ring and pinion
10-19-2007, 08:47 PM
#21
Guest
Posts: n/a
Re: WTB 3.73 ring and pinion
What's that Lassie? You say that L.W. (Bill) ------ III fell down the
old rec.autos.makers.jeep+****** mine and will die if we don't mount a
rescue by Fri, 19 Oct 2007 16:53:58 -0700:
>http://cgi.ebay.com/ebaymotors/JEEP-...spagenameZWDVW
>But your carrier has got to be bent, too. It's like throwing good money
>after bad
They already replaced the carrier, carrier bearings, and spider gears.
Came as a unit. See my other reply to get a link to some pics.
>I would keep an eye open for a Dana 44, that'll fit your car:
>http://jeep.off-road.com/jeep/articl....jsp?id=277046
But then I would want a 44 in the front too. And then a better T
case. At that point I should just by a rubicon. If fact I am looking
for an'05 Rubicon unlimited now. But I still need to get this one
back together.
>
--
Dan
old rec.autos.makers.jeep+****** mine and will die if we don't mount a
rescue by Fri, 19 Oct 2007 16:53:58 -0700:
>http://cgi.ebay.com/ebaymotors/JEEP-...spagenameZWDVW
>But your carrier has got to be bent, too. It's like throwing good money
>after bad
They already replaced the carrier, carrier bearings, and spider gears.
Came as a unit. See my other reply to get a link to some pics.
>I would keep an eye open for a Dana 44, that'll fit your car:
>http://jeep.off-road.com/jeep/articl....jsp?id=277046
But then I would want a 44 in the front too. And then a better T
case. At that point I should just by a rubicon. If fact I am looking
for an'05 Rubicon unlimited now. But I still need to get this one
back together.
>
--
Dan
10-19-2007, 08:47 PM
#22
Guest
Posts: n/a
Re: WTB 3.73 ring and pinion
What's that Lassie? You say that L.W. (Bill) ------ III fell down the
old rec.autos.makers.jeep+****** mine and will die if we don't mount a
rescue by Fri, 19 Oct 2007 16:53:58 -0700:
>http://cgi.ebay.com/ebaymotors/JEEP-...spagenameZWDVW
>But your carrier has got to be bent, too. It's like throwing good money
>after bad
They already replaced the carrier, carrier bearings, and spider gears.
Came as a unit. See my other reply to get a link to some pics.
>I would keep an eye open for a Dana 44, that'll fit your car:
>http://jeep.off-road.com/jeep/articl....jsp?id=277046
But then I would want a 44 in the front too. And then a better T
case. At that point I should just by a rubicon. If fact I am looking
for an'05 Rubicon unlimited now. But I still need to get this one
back together.
>
--
Dan
old rec.autos.makers.jeep+****** mine and will die if we don't mount a
rescue by Fri, 19 Oct 2007 16:53:58 -0700:
>http://cgi.ebay.com/ebaymotors/JEEP-...spagenameZWDVW
>But your carrier has got to be bent, too. It's like throwing good money
>after bad
They already replaced the carrier, carrier bearings, and spider gears.
Came as a unit. See my other reply to get a link to some pics.
>I would keep an eye open for a Dana 44, that'll fit your car:
>http://jeep.off-road.com/jeep/articl....jsp?id=277046
But then I would want a 44 in the front too. And then a better T
case. At that point I should just by a rubicon. If fact I am looking
for an'05 Rubicon unlimited now. But I still need to get this one
back together.
>
--
Dan
10-19-2007, 10:11 PM
#23
Guest
Posts: n/a
Re: WTB 3.73 ring and pinion
Dan if your rear end is growling, and it is not from Mexican food, then all
your internal moving parts are swimming in a soup of gear oil and ring and
pinion chips. This is not good, even for the parts that were new a week
ago. Depending on how long you drove it, the whole thing could be junk by
now.
Cheers,
Earle
"dan" <notme@privacy.net> wrote in message
news:471e4eaf.12237510@news20.forteinc.com...
> What's that Lassie? You say that L.W. (Bill) ------ III fell down the
> old rec.autos.makers.jeep+****** mine and will die if we don't mount a
> rescue by Fri, 19 Oct 2007 16:53:58 -0700:
>
>
>http://cgi.ebay.com/ebaymotors/JEEP-...s-3-73-373-fro
m-posi-rear_W0QQcmdZViewItemQQcategoryZ33731QQihZ005QQite mZ150172814654QQrdZ
1QQsspagenameZWDVW
>
>
> >But your carrier has got to be bent, too. It's like throwing good money
> >after bad
> They already replaced the carrier, carrier bearings, and spider gears.
> Came as a unit. See my other reply to get a link to some pics.
>
> >I would keep an eye open for a Dana 44, that'll fit your car:
> >http://jeep.off-road.com/jeep/articl....jsp?id=277046
>
> But then I would want a 44 in the front too. And then a better T
> case. At that point I should just by a rubicon. If fact I am looking
> for an'05 Rubicon unlimited now. But I still need to get this one
> back together.
>
>
> >
> --
>
> Dan
your internal moving parts are swimming in a soup of gear oil and ring and
pinion chips. This is not good, even for the parts that were new a week
ago. Depending on how long you drove it, the whole thing could be junk by
now.
Cheers,
Earle
"dan" <notme@privacy.net> wrote in message
news:471e4eaf.12237510@news20.forteinc.com...
> What's that Lassie? You say that L.W. (Bill) ------ III fell down the
> old rec.autos.makers.jeep+****** mine and will die if we don't mount a
> rescue by Fri, 19 Oct 2007 16:53:58 -0700:
>
>
>http://cgi.ebay.com/ebaymotors/JEEP-...s-3-73-373-fro
m-posi-rear_W0QQcmdZViewItemQQcategoryZ33731QQihZ005QQite mZ150172814654QQrdZ
1QQsspagenameZWDVW
>
>
> >But your carrier has got to be bent, too. It's like throwing good money
> >after bad
> They already replaced the carrier, carrier bearings, and spider gears.
> Came as a unit. See my other reply to get a link to some pics.
>
> >I would keep an eye open for a Dana 44, that'll fit your car:
> >http://jeep.off-road.com/jeep/articl....jsp?id=277046
>
> But then I would want a 44 in the front too. And then a better T
> case. At that point I should just by a rubicon. If fact I am looking
> for an'05 Rubicon unlimited now. But I still need to get this one
> back together.
>
>
> >
> --
>
> Dan
10-19-2007, 10:11 PM
#24
Guest
Posts: n/a
Re: WTB 3.73 ring and pinion
Dan if your rear end is growling, and it is not from Mexican food, then all
your internal moving parts are swimming in a soup of gear oil and ring and
pinion chips. This is not good, even for the parts that were new a week
ago. Depending on how long you drove it, the whole thing could be junk by
now.
Cheers,
Earle
"dan" <notme@privacy.net> wrote in message
news:471e4eaf.12237510@news20.forteinc.com...
> What's that Lassie? You say that L.W. (Bill) ------ III fell down the
> old rec.autos.makers.jeep+****** mine and will die if we don't mount a
> rescue by Fri, 19 Oct 2007 16:53:58 -0700:
>
>
>http://cgi.ebay.com/ebaymotors/JEEP-...s-3-73-373-fro
m-posi-rear_W0QQcmdZViewItemQQcategoryZ33731QQihZ005QQite mZ150172814654QQrdZ
1QQsspagenameZWDVW
>
>
> >But your carrier has got to be bent, too. It's like throwing good money
> >after bad
> They already replaced the carrier, carrier bearings, and spider gears.
> Came as a unit. See my other reply to get a link to some pics.
>
> >I would keep an eye open for a Dana 44, that'll fit your car:
> >http://jeep.off-road.com/jeep/articl....jsp?id=277046
>
> But then I would want a 44 in the front too. And then a better T
> case. At that point I should just by a rubicon. If fact I am looking
> for an'05 Rubicon unlimited now. But I still need to get this one
> back together.
>
>
> >
> --
>
> Dan
your internal moving parts are swimming in a soup of gear oil and ring and
pinion chips. This is not good, even for the parts that were new a week
ago. Depending on how long you drove it, the whole thing could be junk by
now.
Cheers,
Earle
"dan" <notme@privacy.net> wrote in message
news:471e4eaf.12237510@news20.forteinc.com...
> What's that Lassie? You say that L.W. (Bill) ------ III fell down the
> old rec.autos.makers.jeep+****** mine and will die if we don't mount a
> rescue by Fri, 19 Oct 2007 16:53:58 -0700:
>
>
>http://cgi.ebay.com/ebaymotors/JEEP-...s-3-73-373-fro
m-posi-rear_W0QQcmdZViewItemQQcategoryZ33731QQihZ005QQite mZ150172814654QQrdZ
1QQsspagenameZWDVW
>
>
> >But your carrier has got to be bent, too. It's like throwing good money
> >after bad
> They already replaced the carrier, carrier bearings, and spider gears.
> Came as a unit. See my other reply to get a link to some pics.
>
> >I would keep an eye open for a Dana 44, that'll fit your car:
> >http://jeep.off-road.com/jeep/articl....jsp?id=277046
>
> But then I would want a 44 in the front too. And then a better T
> case. At that point I should just by a rubicon. If fact I am looking
> for an'05 Rubicon unlimited now. But I still need to get this one
> back together.
>
>
> >
> --
>
> Dan
10-19-2007, 10:11 PM
#25
Guest
Posts: n/a
Re: WTB 3.73 ring and pinion
Dan if your rear end is growling, and it is not from Mexican food, then all
your internal moving parts are swimming in a soup of gear oil and ring and
pinion chips. This is not good, even for the parts that were new a week
ago. Depending on how long you drove it, the whole thing could be junk by
now.
Cheers,
Earle
"dan" <notme@privacy.net> wrote in message
news:471e4eaf.12237510@news20.forteinc.com...
> What's that Lassie? You say that L.W. (Bill) ------ III fell down the
> old rec.autos.makers.jeep+****** mine and will die if we don't mount a
> rescue by Fri, 19 Oct 2007 16:53:58 -0700:
>
>
>http://cgi.ebay.com/ebaymotors/JEEP-...s-3-73-373-fro
m-posi-rear_W0QQcmdZViewItemQQcategoryZ33731QQihZ005QQite mZ150172814654QQrdZ
1QQsspagenameZWDVW
>
>
> >But your carrier has got to be bent, too. It's like throwing good money
> >after bad
> They already replaced the carrier, carrier bearings, and spider gears.
> Came as a unit. See my other reply to get a link to some pics.
>
> >I would keep an eye open for a Dana 44, that'll fit your car:
> >http://jeep.off-road.com/jeep/articl....jsp?id=277046
>
> But then I would want a 44 in the front too. And then a better T
> case. At that point I should just by a rubicon. If fact I am looking
> for an'05 Rubicon unlimited now. But I still need to get this one
> back together.
>
>
> >
> --
>
> Dan
your internal moving parts are swimming in a soup of gear oil and ring and
pinion chips. This is not good, even for the parts that were new a week
ago. Depending on how long you drove it, the whole thing could be junk by
now.
Cheers,
Earle
"dan" <notme@privacy.net> wrote in message
news:471e4eaf.12237510@news20.forteinc.com...
> What's that Lassie? You say that L.W. (Bill) ------ III fell down the
> old rec.autos.makers.jeep+****** mine and will die if we don't mount a
> rescue by Fri, 19 Oct 2007 16:53:58 -0700:
>
>
>http://cgi.ebay.com/ebaymotors/JEEP-...s-3-73-373-fro
m-posi-rear_W0QQcmdZViewItemQQcategoryZ33731QQihZ005QQite mZ150172814654QQrdZ
1QQsspagenameZWDVW
>
>
> >But your carrier has got to be bent, too. It's like throwing good money
> >after bad
> They already replaced the carrier, carrier bearings, and spider gears.
> Came as a unit. See my other reply to get a link to some pics.
>
> >I would keep an eye open for a Dana 44, that'll fit your car:
> >http://jeep.off-road.com/jeep/articl....jsp?id=277046
>
> But then I would want a 44 in the front too. And then a better T
> case. At that point I should just by a rubicon. If fact I am looking
> for an'05 Rubicon unlimited now. But I still need to get this one
> back together.
>
>
> >
> --
>
> Dan
10-19-2007, 10:31 PM
#26
Guest
Posts: n/a
Re: WTB 3.73 ring and pinion
What's that Lassie? You say that Earle Horton fell down the old
rec.autos.makers.jeep+****** mine and will die if we don't mount a
rescue by Fri, 19 Oct 2007 20:11:03 -0600:
>
>Dan if your rear end is growling, and it is not from Mexican food, then all
>your internal moving parts are swimming in a soup of gear oil and ring and
>pinion chips. This is not good, even for the parts that were new a week
>ago. Depending on how long you drove it, the whole thing could be junk by
>now.
I think the growling is from bad pinion bearings. And I'm not driving
it any more. It did sound better when the broken carrier was in
though. The pinion took a hell of a shot when the cross pin came out.
Still can't believe I made it home.
Pics: http://www.gis.net/~riderdan/pics/diff/
Dan H.
--
Dan
rec.autos.makers.jeep+****** mine and will die if we don't mount a
rescue by Fri, 19 Oct 2007 20:11:03 -0600:
>
>Dan if your rear end is growling, and it is not from Mexican food, then all
>your internal moving parts are swimming in a soup of gear oil and ring and
>pinion chips. This is not good, even for the parts that were new a week
>ago. Depending on how long you drove it, the whole thing could be junk by
>now.
I think the growling is from bad pinion bearings. And I'm not driving
it any more. It did sound better when the broken carrier was in
though. The pinion took a hell of a shot when the cross pin came out.
Still can't believe I made it home.
Pics: http://www.gis.net/~riderdan/pics/diff/
Dan H.
--
Dan
10-19-2007, 10:31 PM
#27
Guest
Posts: n/a
Re: WTB 3.73 ring and pinion
What's that Lassie? You say that Earle Horton fell down the old
rec.autos.makers.jeep+****** mine and will die if we don't mount a
rescue by Fri, 19 Oct 2007 20:11:03 -0600:
>
>Dan if your rear end is growling, and it is not from Mexican food, then all
>your internal moving parts are swimming in a soup of gear oil and ring and
>pinion chips. This is not good, even for the parts that were new a week
>ago. Depending on how long you drove it, the whole thing could be junk by
>now.
I think the growling is from bad pinion bearings. And I'm not driving
it any more. It did sound better when the broken carrier was in
though. The pinion took a hell of a shot when the cross pin came out.
Still can't believe I made it home.
Pics: http://www.gis.net/~riderdan/pics/diff/
Dan H.
--
Dan
rec.autos.makers.jeep+****** mine and will die if we don't mount a
rescue by Fri, 19 Oct 2007 20:11:03 -0600:
>
>Dan if your rear end is growling, and it is not from Mexican food, then all
>your internal moving parts are swimming in a soup of gear oil and ring and
>pinion chips. This is not good, even for the parts that were new a week
>ago. Depending on how long you drove it, the whole thing could be junk by
>now.
I think the growling is from bad pinion bearings. And I'm not driving
it any more. It did sound better when the broken carrier was in
though. The pinion took a hell of a shot when the cross pin came out.
Still can't believe I made it home.
Pics: http://www.gis.net/~riderdan/pics/diff/
Dan H.
--
Dan
10-19-2007, 10:31 PM
#28
Guest
Posts: n/a
Re: WTB 3.73 ring and pinion
What's that Lassie? You say that Earle Horton fell down the old
rec.autos.makers.jeep+****** mine and will die if we don't mount a
rescue by Fri, 19 Oct 2007 20:11:03 -0600:
>
>Dan if your rear end is growling, and it is not from Mexican food, then all
>your internal moving parts are swimming in a soup of gear oil and ring and
>pinion chips. This is not good, even for the parts that were new a week
>ago. Depending on how long you drove it, the whole thing could be junk by
>now.
I think the growling is from bad pinion bearings. And I'm not driving
it any more. It did sound better when the broken carrier was in
though. The pinion took a hell of a shot when the cross pin came out.
Still can't believe I made it home.
Pics: http://www.gis.net/~riderdan/pics/diff/
Dan H.
--
Dan
rec.autos.makers.jeep+****** mine and will die if we don't mount a
rescue by Fri, 19 Oct 2007 20:11:03 -0600:
>
>Dan if your rear end is growling, and it is not from Mexican food, then all
>your internal moving parts are swimming in a soup of gear oil and ring and
>pinion chips. This is not good, even for the parts that were new a week
>ago. Depending on how long you drove it, the whole thing could be junk by
>now.
I think the growling is from bad pinion bearings. And I'm not driving
it any more. It did sound better when the broken carrier was in
though. The pinion took a hell of a shot when the cross pin came out.
Still can't believe I made it home.
Pics: http://www.gis.net/~riderdan/pics/diff/
Dan H.
--
Dan
10-19-2007, 10:45 PM
#29
Guest
Posts: n/a
Re: WTB 3.73 ring and pinion
That bearing tells us it was history long before the lock bolt vibrated
out.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"dan" <notme@privacy.net> wrote in message
news:471d4c4e.11628872@news20.forteinc.com...
>
> I took some picks of the damage.
>
> http://www.gis.net/~riderdan/pics/diff/
>
> The cross pin(not shown) was broken in half.
> Only one half of the carrier is broken.
>
> When I was on my to 'Vegas several years ago, I noticed an oil leak.
> I went to the local dealer and had them fix it.
> When they went to pull the axles, they found that the cross pin
> retaining bolt's head was snapped off. They had to drill out the pin
> and replace it. I think they did a bad job of it and didn't leave
> much threads in the carrier.
> --
>
> Dan
out.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"dan" <notme@privacy.net> wrote in message
news:471d4c4e.11628872@news20.forteinc.com...
>
> I took some picks of the damage.
>
> http://www.gis.net/~riderdan/pics/diff/
>
> The cross pin(not shown) was broken in half.
> Only one half of the carrier is broken.
>
> When I was on my to 'Vegas several years ago, I noticed an oil leak.
> I went to the local dealer and had them fix it.
> When they went to pull the axles, they found that the cross pin
> retaining bolt's head was snapped off. They had to drill out the pin
> and replace it. I think they did a bad job of it and didn't leave
> much threads in the carrier.
> --
>
> Dan
10-19-2007, 10:45 PM
#30
Guest
Posts: n/a
Re: WTB 3.73 ring and pinion
That bearing tells us it was history long before the lock bolt vibrated
out.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"dan" <notme@privacy.net> wrote in message
news:471d4c4e.11628872@news20.forteinc.com...
>
> I took some picks of the damage.
>
> http://www.gis.net/~riderdan/pics/diff/
>
> The cross pin(not shown) was broken in half.
> Only one half of the carrier is broken.
>
> When I was on my to 'Vegas several years ago, I noticed an oil leak.
> I went to the local dealer and had them fix it.
> When they went to pull the axles, they found that the cross pin
> retaining bolt's head was snapped off. They had to drill out the pin
> and replace it. I think they did a bad job of it and didn't leave
> much threads in the carrier.
> --
>
> Dan
out.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"dan" <notme@privacy.net> wrote in message
news:471d4c4e.11628872@news20.forteinc.com...
>
> I took some picks of the damage.
>
> http://www.gis.net/~riderdan/pics/diff/
>
> The cross pin(not shown) was broken in half.
> Only one half of the carrier is broken.
>
> When I was on my to 'Vegas several years ago, I noticed an oil leak.
> I went to the local dealer and had them fix it.
> When they went to pull the axles, they found that the cross pin
> retaining bolt's head was snapped off. They had to drill out the pin
> and replace it. I think they did a bad job of it and didn't leave
> much threads in the carrier.
> --
>
> Dan
