Wrangler still shuts Down?
07-14-2005, 11:24 AM
#11
Guest
Posts: n/a
Re: Wrangler still shuts Down?
by majority it is the crank sensor on the bell housing.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D5BF3E.2E85B16D@sympatico.ca...
> What about the real CPS that causes 99% of shutdowns because it's plug
> sits on the exhaust manifold and gets corroded or a dead wire mesh
> ground from the engine head to the firewall?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Dean wrote:
>>
>> I would like to thank DougW for all his help. The Camshaft sensor change
>> went well, the wrangler started right up. Took it around the block it
>> coughed and stuttered then shut down. This time it did start right back
>> up
>> though. I have no idea what could be the problem now. I don't think its
>> fuel
>> related or the plugs, plug wires,cap, or rotor. What am I forgetting?
>> thanks Dean.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D5BF3E.2E85B16D@sympatico.ca...
> What about the real CPS that causes 99% of shutdowns because it's plug
> sits on the exhaust manifold and gets corroded or a dead wire mesh
> ground from the engine head to the firewall?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Dean wrote:
>>
>> I would like to thank DougW for all his help. The Camshaft sensor change
>> went well, the wrangler started right up. Took it around the block it
>> coughed and stuttered then shut down. This time it did start right back
>> up
>> though. I have no idea what could be the problem now. I don't think its
>> fuel
>> related or the plugs, plug wires,cap, or rotor. What am I forgetting?
>> thanks Dean.
07-14-2005, 11:24 AM
#12
Guest
Posts: n/a
Re: Wrangler still shuts Down?
by majority it is the crank sensor on the bell housing.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D5BF3E.2E85B16D@sympatico.ca...
> What about the real CPS that causes 99% of shutdowns because it's plug
> sits on the exhaust manifold and gets corroded or a dead wire mesh
> ground from the engine head to the firewall?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Dean wrote:
>>
>> I would like to thank DougW for all his help. The Camshaft sensor change
>> went well, the wrangler started right up. Took it around the block it
>> coughed and stuttered then shut down. This time it did start right back
>> up
>> though. I have no idea what could be the problem now. I don't think its
>> fuel
>> related or the plugs, plug wires,cap, or rotor. What am I forgetting?
>> thanks Dean.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D5BF3E.2E85B16D@sympatico.ca...
> What about the real CPS that causes 99% of shutdowns because it's plug
> sits on the exhaust manifold and gets corroded or a dead wire mesh
> ground from the engine head to the firewall?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Dean wrote:
>>
>> I would like to thank DougW for all his help. The Camshaft sensor change
>> went well, the wrangler started right up. Took it around the block it
>> coughed and stuttered then shut down. This time it did start right back
>> up
>> though. I have no idea what could be the problem now. I don't think its
>> fuel
>> related or the plugs, plug wires,cap, or rotor. What am I forgetting?
>> thanks Dean.
07-14-2005, 11:24 AM
#13
Guest
Posts: n/a
Re: Wrangler still shuts Down?
by majority it is the crank sensor on the bell housing.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D5BF3E.2E85B16D@sympatico.ca...
> What about the real CPS that causes 99% of shutdowns because it's plug
> sits on the exhaust manifold and gets corroded or a dead wire mesh
> ground from the engine head to the firewall?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Dean wrote:
>>
>> I would like to thank DougW for all his help. The Camshaft sensor change
>> went well, the wrangler started right up. Took it around the block it
>> coughed and stuttered then shut down. This time it did start right back
>> up
>> though. I have no idea what could be the problem now. I don't think its
>> fuel
>> related or the plugs, plug wires,cap, or rotor. What am I forgetting?
>> thanks Dean.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D5BF3E.2E85B16D@sympatico.ca...
> What about the real CPS that causes 99% of shutdowns because it's plug
> sits on the exhaust manifold and gets corroded or a dead wire mesh
> ground from the engine head to the firewall?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Dean wrote:
>>
>> I would like to thank DougW for all his help. The Camshaft sensor change
>> went well, the wrangler started right up. Took it around the block it
>> coughed and stuttered then shut down. This time it did start right back
>> up
>> though. I have no idea what could be the problem now. I don't think its
>> fuel
>> related or the plugs, plug wires,cap, or rotor. What am I forgetting?
>> thanks Dean.
07-14-2005, 02:31 PM
#14
Guest
Posts: n/a
Re: Wrangler still shuts Down?
Ditto. I ran for a while when it was disconnected while other work
was being done, as in one of it's tests at:
http://www.off-road.com/jeep/cheroke...tdcsensor.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
extremetj wrote:
>
> by majority it is the crank sensor on the bell housing.
was being done, as in one of it's tests at:
http://www.off-road.com/jeep/cheroke...tdcsensor.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
extremetj wrote:
>
> by majority it is the crank sensor on the bell housing.
07-14-2005, 02:31 PM
#15
Guest
Posts: n/a
Re: Wrangler still shuts Down?
Ditto. I ran for a while when it was disconnected while other work
was being done, as in one of it's tests at:
http://www.off-road.com/jeep/cheroke...tdcsensor.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
extremetj wrote:
>
> by majority it is the crank sensor on the bell housing.
was being done, as in one of it's tests at:
http://www.off-road.com/jeep/cheroke...tdcsensor.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
extremetj wrote:
>
> by majority it is the crank sensor on the bell housing.
07-14-2005, 02:31 PM
#16
Guest
Posts: n/a
Re: Wrangler still shuts Down?
Ditto. I ran for a while when it was disconnected while other work
was being done, as in one of it's tests at:
http://www.off-road.com/jeep/cheroke...tdcsensor.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
extremetj wrote:
>
> by majority it is the crank sensor on the bell housing.
was being done, as in one of it's tests at:
http://www.off-road.com/jeep/cheroke...tdcsensor.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
extremetj wrote:
>
> by majority it is the crank sensor on the bell housing.
07-14-2005, 02:31 PM
#17
Guest
Posts: n/a
Re: Wrangler still shuts Down?
Ditto. I ran for a while when it was disconnected while other work
was being done, as in one of it's tests at:
http://www.off-road.com/jeep/cheroke...tdcsensor.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
extremetj wrote:
>
> by majority it is the crank sensor on the bell housing.
was being done, as in one of it's tests at:
http://www.off-road.com/jeep/cheroke...tdcsensor.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
extremetj wrote:
>
> by majority it is the crank sensor on the bell housing.
07-15-2005, 09:55 PM
#18
Guest
Posts: n/a
Re: Wrangler still shuts Down?
The crank sensor was just changed a year or two ago. Dean.
"Dean" <svtfocus@atlanticbb.net> wrote in message
news:11dbbbl161lb39@corp.supernews.com...
>I would like to thank DougW for all his help. The Camshaft sensor change
>went well, the wrangler started right up. Took it around the block it
>coughed and stuttered then shut down. This time it did start right back up
>though. I have no idea what could be the problem now. I don't think its
>fuel related or the plugs, plug wires,cap, or rotor. What am I forgetting?
> thanks Dean.
>
"Dean" <svtfocus@atlanticbb.net> wrote in message
news:11dbbbl161lb39@corp.supernews.com...
>I would like to thank DougW for all his help. The Camshaft sensor change
>went well, the wrangler started right up. Took it around the block it
>coughed and stuttered then shut down. This time it did start right back up
>though. I have no idea what could be the problem now. I don't think its
>fuel related or the plugs, plug wires,cap, or rotor. What am I forgetting?
> thanks Dean.
>
07-15-2005, 09:55 PM
#19
Guest
Posts: n/a
Re: Wrangler still shuts Down?
The crank sensor was just changed a year or two ago. Dean.
"Dean" <svtfocus@atlanticbb.net> wrote in message
news:11dbbbl161lb39@corp.supernews.com...
>I would like to thank DougW for all his help. The Camshaft sensor change
>went well, the wrangler started right up. Took it around the block it
>coughed and stuttered then shut down. This time it did start right back up
>though. I have no idea what could be the problem now. I don't think its
>fuel related or the plugs, plug wires,cap, or rotor. What am I forgetting?
> thanks Dean.
>
"Dean" <svtfocus@atlanticbb.net> wrote in message
news:11dbbbl161lb39@corp.supernews.com...
>I would like to thank DougW for all his help. The Camshaft sensor change
>went well, the wrangler started right up. Took it around the block it
>coughed and stuttered then shut down. This time it did start right back up
>though. I have no idea what could be the problem now. I don't think its
>fuel related or the plugs, plug wires,cap, or rotor. What am I forgetting?
> thanks Dean.
>
07-15-2005, 09:55 PM
#20
Guest
Posts: n/a
Re: Wrangler still shuts Down?
The crank sensor was just changed a year or two ago. Dean.
"Dean" <svtfocus@atlanticbb.net> wrote in message
news:11dbbbl161lb39@corp.supernews.com...
>I would like to thank DougW for all his help. The Camshaft sensor change
>went well, the wrangler started right up. Took it around the block it
>coughed and stuttered then shut down. This time it did start right back up
>though. I have no idea what could be the problem now. I don't think its
>fuel related or the plugs, plug wires,cap, or rotor. What am I forgetting?
> thanks Dean.
>
"Dean" <svtfocus@atlanticbb.net> wrote in message
news:11dbbbl161lb39@corp.supernews.com...
>I would like to thank DougW for all his help. The Camshaft sensor change
>went well, the wrangler started right up. Took it around the block it
>coughed and stuttered then shut down. This time it did start right back up
>though. I have no idea what could be the problem now. I don't think its
>fuel related or the plugs, plug wires,cap, or rotor. What am I forgetting?
> thanks Dean.
>