Wrangler shuts down.
#31
Guest
Posts: n/a
Re: Wrangler shuts down.
Dean did pass the time by typing:
> Thanks DougW, So that sensor is in the distributor below the rotor?
Yep.
If you are going to replace it the whole distributor
has to come out and there is a little pin at the bottom
you take out to remove the gear. Then the guts slide
out and you can replace the sensor.
http://revbeergoggles.com/stator/
Not too difficult providing you mark exactly where the
rotor is pointing before you remove it. Similar to
this.. http://revbeergoggles.com/distributor/
Any codes?
http://www.revbeergoggles.com/engine_codes.html
Keep in mind I'm working from a 93 ZJ 4.0. Should
be the same..
--
DougW
> Thanks DougW, So that sensor is in the distributor below the rotor?
Yep.
If you are going to replace it the whole distributor
has to come out and there is a little pin at the bottom
you take out to remove the gear. Then the guts slide
out and you can replace the sensor.
http://revbeergoggles.com/stator/
Not too difficult providing you mark exactly where the
rotor is pointing before you remove it. Similar to
this.. http://revbeergoggles.com/distributor/
Any codes?
http://www.revbeergoggles.com/engine_codes.html
Keep in mind I'm working from a 93 ZJ 4.0. Should
be the same..
--
DougW
#32
Guest
Posts: n/a
Re: Wrangler shuts down.
Dean did pass the time by typing:
> Thanks DougW, So that sensor is in the distributor below the rotor?
Yep.
If you are going to replace it the whole distributor
has to come out and there is a little pin at the bottom
you take out to remove the gear. Then the guts slide
out and you can replace the sensor.
http://revbeergoggles.com/stator/
Not too difficult providing you mark exactly where the
rotor is pointing before you remove it. Similar to
this.. http://revbeergoggles.com/distributor/
Any codes?
http://www.revbeergoggles.com/engine_codes.html
Keep in mind I'm working from a 93 ZJ 4.0. Should
be the same..
--
DougW
> Thanks DougW, So that sensor is in the distributor below the rotor?
Yep.
If you are going to replace it the whole distributor
has to come out and there is a little pin at the bottom
you take out to remove the gear. Then the guts slide
out and you can replace the sensor.
http://revbeergoggles.com/stator/
Not too difficult providing you mark exactly where the
rotor is pointing before you remove it. Similar to
this.. http://revbeergoggles.com/distributor/
Any codes?
http://www.revbeergoggles.com/engine_codes.html
Keep in mind I'm working from a 93 ZJ 4.0. Should
be the same..
--
DougW
#33
Guest
Posts: n/a
Re: Wrangler shuts down.
Dean did pass the time by typing:
> Thanks DougW, So that sensor is in the distributor below the rotor?
Yep.
If you are going to replace it the whole distributor
has to come out and there is a little pin at the bottom
you take out to remove the gear. Then the guts slide
out and you can replace the sensor.
http://revbeergoggles.com/stator/
Not too difficult providing you mark exactly where the
rotor is pointing before you remove it. Similar to
this.. http://revbeergoggles.com/distributor/
Any codes?
http://www.revbeergoggles.com/engine_codes.html
Keep in mind I'm working from a 93 ZJ 4.0. Should
be the same..
--
DougW
> Thanks DougW, So that sensor is in the distributor below the rotor?
Yep.
If you are going to replace it the whole distributor
has to come out and there is a little pin at the bottom
you take out to remove the gear. Then the guts slide
out and you can replace the sensor.
http://revbeergoggles.com/stator/
Not too difficult providing you mark exactly where the
rotor is pointing before you remove it. Similar to
this.. http://revbeergoggles.com/distributor/
Any codes?
http://www.revbeergoggles.com/engine_codes.html
Keep in mind I'm working from a 93 ZJ 4.0. Should
be the same..
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
brookej
Jeep Grand Cherokee Forum
2
02-28-2012 08:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)