Wiring a horn
Guest
Posts: n/a
Re: Wiring a horn
If you don't want the switch, take the horn button wire straight to 85 on
the relay. The clicking sound you hear may be the relay.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> Don't I need the switch to activate the air horn? How else would this
> happen?
>
> Thanks,
>
> Bill
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:CONCb.8517$4J.7465@news01.roc.ny...
> > Q1: Yes, if you don't have some sort of wiring harness that came with
the
> > new air horn, you will have to make that wire and any other that is
> missing.
> > Q2: The only stock wires available would be from the horn button to the
> > stock horns. The switch would normally go under or on the dash and is
> only
> > necessary if you want to maintain use of the stock horn.
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > >
> > > 83 CJ7, 258, I6
> > >
> > > I'm trying to wire an air horn which was on my jeep when I bought it
> but
> > > never hooked up correctly.
> > >
> > > I have the following diagram I've been using to hook it up and I have
a
> > > couple of questions.
> > >
> > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > >
> > > Q1: From the positive battery pole to the 30 pole on the switch, I
don't
> > > have this wire. Is this something I should fabricate or can I buy it?
> > >
> > > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > > harness? Where would the single pole, double throw switch be? Under
> dash
> > > or behind firewall? Should I also fabricate this wire or should it be
> in
> > > the wiring harness?
> > >
> > > Thanks for any help,
> > >
> > >
> > > Bill
> > >
> > >
> > >
> > >
> >
> >
>
>
the relay. The clicking sound you hear may be the relay.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> Don't I need the switch to activate the air horn? How else would this
> happen?
>
> Thanks,
>
> Bill
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:CONCb.8517$4J.7465@news01.roc.ny...
> > Q1: Yes, if you don't have some sort of wiring harness that came with
the
> > new air horn, you will have to make that wire and any other that is
> missing.
> > Q2: The only stock wires available would be from the horn button to the
> > stock horns. The switch would normally go under or on the dash and is
> only
> > necessary if you want to maintain use of the stock horn.
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > >
> > > 83 CJ7, 258, I6
> > >
> > > I'm trying to wire an air horn which was on my jeep when I bought it
> but
> > > never hooked up correctly.
> > >
> > > I have the following diagram I've been using to hook it up and I have
a
> > > couple of questions.
> > >
> > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > >
> > > Q1: From the positive battery pole to the 30 pole on the switch, I
don't
> > > have this wire. Is this something I should fabricate or can I buy it?
> > >
> > > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > > harness? Where would the single pole, double throw switch be? Under
> dash
> > > or behind firewall? Should I also fabricate this wire or should it be
> in
> > > the wiring harness?
> > >
> > > Thanks for any help,
> > >
> > >
> > > Bill
> > >
> > >
> > >
> > >
> >
> >
>
>
Guest
Posts: n/a
Re: Wiring a horn
If you don't want the switch, take the horn button wire straight to 85 on
the relay. The clicking sound you hear may be the relay.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> Don't I need the switch to activate the air horn? How else would this
> happen?
>
> Thanks,
>
> Bill
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:CONCb.8517$4J.7465@news01.roc.ny...
> > Q1: Yes, if you don't have some sort of wiring harness that came with
the
> > new air horn, you will have to make that wire and any other that is
> missing.
> > Q2: The only stock wires available would be from the horn button to the
> > stock horns. The switch would normally go under or on the dash and is
> only
> > necessary if you want to maintain use of the stock horn.
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > >
> > > 83 CJ7, 258, I6
> > >
> > > I'm trying to wire an air horn which was on my jeep when I bought it
> but
> > > never hooked up correctly.
> > >
> > > I have the following diagram I've been using to hook it up and I have
a
> > > couple of questions.
> > >
> > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > >
> > > Q1: From the positive battery pole to the 30 pole on the switch, I
don't
> > > have this wire. Is this something I should fabricate or can I buy it?
> > >
> > > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > > harness? Where would the single pole, double throw switch be? Under
> dash
> > > or behind firewall? Should I also fabricate this wire or should it be
> in
> > > the wiring harness?
> > >
> > > Thanks for any help,
> > >
> > >
> > > Bill
> > >
> > >
> > >
> > >
> >
> >
>
>
the relay. The clicking sound you hear may be the relay.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> Don't I need the switch to activate the air horn? How else would this
> happen?
>
> Thanks,
>
> Bill
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:CONCb.8517$4J.7465@news01.roc.ny...
> > Q1: Yes, if you don't have some sort of wiring harness that came with
the
> > new air horn, you will have to make that wire and any other that is
> missing.
> > Q2: The only stock wires available would be from the horn button to the
> > stock horns. The switch would normally go under or on the dash and is
> only
> > necessary if you want to maintain use of the stock horn.
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > >
> > > 83 CJ7, 258, I6
> > >
> > > I'm trying to wire an air horn which was on my jeep when I bought it
> but
> > > never hooked up correctly.
> > >
> > > I have the following diagram I've been using to hook it up and I have
a
> > > couple of questions.
> > >
> > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > >
> > > Q1: From the positive battery pole to the 30 pole on the switch, I
don't
> > > have this wire. Is this something I should fabricate or can I buy it?
> > >
> > > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > > harness? Where would the single pole, double throw switch be? Under
> dash
> > > or behind firewall? Should I also fabricate this wire or should it be
> in
> > > the wiring harness?
> > >
> > > Thanks for any help,
> > >
> > >
> > > Bill
> > >
> > >
> > >
> > >
> >
> >
>
>
Guest
Posts: n/a
Re: Wiring a horn
If you don't want the switch, take the horn button wire straight to 85 on
the relay. The clicking sound you hear may be the relay.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> Don't I need the switch to activate the air horn? How else would this
> happen?
>
> Thanks,
>
> Bill
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:CONCb.8517$4J.7465@news01.roc.ny...
> > Q1: Yes, if you don't have some sort of wiring harness that came with
the
> > new air horn, you will have to make that wire and any other that is
> missing.
> > Q2: The only stock wires available would be from the horn button to the
> > stock horns. The switch would normally go under or on the dash and is
> only
> > necessary if you want to maintain use of the stock horn.
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > >
> > > 83 CJ7, 258, I6
> > >
> > > I'm trying to wire an air horn which was on my jeep when I bought it
> but
> > > never hooked up correctly.
> > >
> > > I have the following diagram I've been using to hook it up and I have
a
> > > couple of questions.
> > >
> > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > >
> > > Q1: From the positive battery pole to the 30 pole on the switch, I
don't
> > > have this wire. Is this something I should fabricate or can I buy it?
> > >
> > > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > > harness? Where would the single pole, double throw switch be? Under
> dash
> > > or behind firewall? Should I also fabricate this wire or should it be
> in
> > > the wiring harness?
> > >
> > > Thanks for any help,
> > >
> > >
> > > Bill
> > >
> > >
> > >
> > >
> >
> >
>
>
the relay. The clicking sound you hear may be the relay.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> Don't I need the switch to activate the air horn? How else would this
> happen?
>
> Thanks,
>
> Bill
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:CONCb.8517$4J.7465@news01.roc.ny...
> > Q1: Yes, if you don't have some sort of wiring harness that came with
the
> > new air horn, you will have to make that wire and any other that is
> missing.
> > Q2: The only stock wires available would be from the horn button to the
> > stock horns. The switch would normally go under or on the dash and is
> only
> > necessary if you want to maintain use of the stock horn.
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > >
> > > 83 CJ7, 258, I6
> > >
> > > I'm trying to wire an air horn which was on my jeep when I bought it
> but
> > > never hooked up correctly.
> > >
> > > I have the following diagram I've been using to hook it up and I have
a
> > > couple of questions.
> > >
> > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > >
> > > Q1: From the positive battery pole to the 30 pole on the switch, I
don't
> > > have this wire. Is this something I should fabricate or can I buy it?
> > >
> > > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > > harness? Where would the single pole, double throw switch be? Under
> dash
> > > or behind firewall? Should I also fabricate this wire or should it be
> in
> > > the wiring harness?
> > >
> > > Thanks for any help,
> > >
> > >
> > > Bill
> > >
> > >
> > >
> > >
> >
> >
>
>
Guest
Posts: n/a
Re: Wiring a horn
The clicking sound is coming from under my dash. I listened outside in the
engine compartment and I couldn't hear it that well. It sounds like it's
coming from around the light switch but sounds play tricks on you under
there.
How do I find the horn button wire?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:H5OCb.8520$7O.937@news01.roc.ny...
> If you don't want the switch, take the horn button wire straight to 85 on
> the relay. The clicking sound you hear may be the relay.
>
> JimG
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > Don't I need the switch to activate the air horn? How else would this
> > happen?
> >
> > Thanks,
> >
> > Bill
> >
> > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > Q1: Yes, if you don't have some sort of wiring harness that came with
> the
> > > new air horn, you will have to make that wire and any other that is
> > missing.
> > > Q2: The only stock wires available would be from the horn button to
the
> > > stock horns. The switch would normally go under or on the dash and is
> > only
> > > necessary if you want to maintain use of the stock horn.
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > Hi all,
> > > >
> > > > 83 CJ7, 258, I6
> > > >
> > > > I'm trying to wire an air horn which was on my jeep when I bought
it
> > but
> > > > never hooked up correctly.
> > > >
> > > > I have the following diagram I've been using to hook it up and I
have
> a
> > > > couple of questions.
> > > >
> > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > >
> > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> don't
> > > > have this wire. Is this something I should fabricate or can I buy
it?
> > > >
> > > > Q2: Where do I find the wire which goes to the 85 pole from the
wiring
> > > > harness? Where would the single pole, double throw switch be?
Under
> > dash
> > > > or behind firewall? Should I also fabricate this wire or should it
be
> > in
> > > > the wiring harness?
> > > >
> > > > Thanks for any help,
> > > >
> > > >
> > > > Bill
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
engine compartment and I couldn't hear it that well. It sounds like it's
coming from around the light switch but sounds play tricks on you under
there.
How do I find the horn button wire?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:H5OCb.8520$7O.937@news01.roc.ny...
> If you don't want the switch, take the horn button wire straight to 85 on
> the relay. The clicking sound you hear may be the relay.
>
> JimG
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > Don't I need the switch to activate the air horn? How else would this
> > happen?
> >
> > Thanks,
> >
> > Bill
> >
> > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > Q1: Yes, if you don't have some sort of wiring harness that came with
> the
> > > new air horn, you will have to make that wire and any other that is
> > missing.
> > > Q2: The only stock wires available would be from the horn button to
the
> > > stock horns. The switch would normally go under or on the dash and is
> > only
> > > necessary if you want to maintain use of the stock horn.
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > Hi all,
> > > >
> > > > 83 CJ7, 258, I6
> > > >
> > > > I'm trying to wire an air horn which was on my jeep when I bought
it
> > but
> > > > never hooked up correctly.
> > > >
> > > > I have the following diagram I've been using to hook it up and I
have
> a
> > > > couple of questions.
> > > >
> > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > >
> > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> don't
> > > > have this wire. Is this something I should fabricate or can I buy
it?
> > > >
> > > > Q2: Where do I find the wire which goes to the 85 pole from the
wiring
> > > > harness? Where would the single pole, double throw switch be?
Under
> > dash
> > > > or behind firewall? Should I also fabricate this wire or should it
be
> > in
> > > > the wiring harness?
> > > >
> > > > Thanks for any help,
> > > >
> > > >
> > > > Bill
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Guest
Posts: n/a
Re: Wiring a horn
The clicking sound is coming from under my dash. I listened outside in the
engine compartment and I couldn't hear it that well. It sounds like it's
coming from around the light switch but sounds play tricks on you under
there.
How do I find the horn button wire?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:H5OCb.8520$7O.937@news01.roc.ny...
> If you don't want the switch, take the horn button wire straight to 85 on
> the relay. The clicking sound you hear may be the relay.
>
> JimG
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > Don't I need the switch to activate the air horn? How else would this
> > happen?
> >
> > Thanks,
> >
> > Bill
> >
> > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > Q1: Yes, if you don't have some sort of wiring harness that came with
> the
> > > new air horn, you will have to make that wire and any other that is
> > missing.
> > > Q2: The only stock wires available would be from the horn button to
the
> > > stock horns. The switch would normally go under or on the dash and is
> > only
> > > necessary if you want to maintain use of the stock horn.
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > Hi all,
> > > >
> > > > 83 CJ7, 258, I6
> > > >
> > > > I'm trying to wire an air horn which was on my jeep when I bought
it
> > but
> > > > never hooked up correctly.
> > > >
> > > > I have the following diagram I've been using to hook it up and I
have
> a
> > > > couple of questions.
> > > >
> > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > >
> > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> don't
> > > > have this wire. Is this something I should fabricate or can I buy
it?
> > > >
> > > > Q2: Where do I find the wire which goes to the 85 pole from the
wiring
> > > > harness? Where would the single pole, double throw switch be?
Under
> > dash
> > > > or behind firewall? Should I also fabricate this wire or should it
be
> > in
> > > > the wiring harness?
> > > >
> > > > Thanks for any help,
> > > >
> > > >
> > > > Bill
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
engine compartment and I couldn't hear it that well. It sounds like it's
coming from around the light switch but sounds play tricks on you under
there.
How do I find the horn button wire?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:H5OCb.8520$7O.937@news01.roc.ny...
> If you don't want the switch, take the horn button wire straight to 85 on
> the relay. The clicking sound you hear may be the relay.
>
> JimG
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > Don't I need the switch to activate the air horn? How else would this
> > happen?
> >
> > Thanks,
> >
> > Bill
> >
> > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > Q1: Yes, if you don't have some sort of wiring harness that came with
> the
> > > new air horn, you will have to make that wire and any other that is
> > missing.
> > > Q2: The only stock wires available would be from the horn button to
the
> > > stock horns. The switch would normally go under or on the dash and is
> > only
> > > necessary if you want to maintain use of the stock horn.
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > Hi all,
> > > >
> > > > 83 CJ7, 258, I6
> > > >
> > > > I'm trying to wire an air horn which was on my jeep when I bought
it
> > but
> > > > never hooked up correctly.
> > > >
> > > > I have the following diagram I've been using to hook it up and I
have
> a
> > > > couple of questions.
> > > >
> > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > >
> > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> don't
> > > > have this wire. Is this something I should fabricate or can I buy
it?
> > > >
> > > > Q2: Where do I find the wire which goes to the 85 pole from the
wiring
> > > > harness? Where would the single pole, double throw switch be?
Under
> > dash
> > > > or behind firewall? Should I also fabricate this wire or should it
be
> > in
> > > > the wiring harness?
> > > >
> > > > Thanks for any help,
> > > >
> > > >
> > > > Bill
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Guest
Posts: n/a
Re: Wiring a horn
The clicking sound is coming from under my dash. I listened outside in the
engine compartment and I couldn't hear it that well. It sounds like it's
coming from around the light switch but sounds play tricks on you under
there.
How do I find the horn button wire?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:H5OCb.8520$7O.937@news01.roc.ny...
> If you don't want the switch, take the horn button wire straight to 85 on
> the relay. The clicking sound you hear may be the relay.
>
> JimG
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > Don't I need the switch to activate the air horn? How else would this
> > happen?
> >
> > Thanks,
> >
> > Bill
> >
> > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > Q1: Yes, if you don't have some sort of wiring harness that came with
> the
> > > new air horn, you will have to make that wire and any other that is
> > missing.
> > > Q2: The only stock wires available would be from the horn button to
the
> > > stock horns. The switch would normally go under or on the dash and is
> > only
> > > necessary if you want to maintain use of the stock horn.
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > Hi all,
> > > >
> > > > 83 CJ7, 258, I6
> > > >
> > > > I'm trying to wire an air horn which was on my jeep when I bought
it
> > but
> > > > never hooked up correctly.
> > > >
> > > > I have the following diagram I've been using to hook it up and I
have
> a
> > > > couple of questions.
> > > >
> > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > >
> > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> don't
> > > > have this wire. Is this something I should fabricate or can I buy
it?
> > > >
> > > > Q2: Where do I find the wire which goes to the 85 pole from the
wiring
> > > > harness? Where would the single pole, double throw switch be?
Under
> > dash
> > > > or behind firewall? Should I also fabricate this wire or should it
be
> > in
> > > > the wiring harness?
> > > >
> > > > Thanks for any help,
> > > >
> > > >
> > > > Bill
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
engine compartment and I couldn't hear it that well. It sounds like it's
coming from around the light switch but sounds play tricks on you under
there.
How do I find the horn button wire?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:H5OCb.8520$7O.937@news01.roc.ny...
> If you don't want the switch, take the horn button wire straight to 85 on
> the relay. The clicking sound you hear may be the relay.
>
> JimG
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > Don't I need the switch to activate the air horn? How else would this
> > happen?
> >
> > Thanks,
> >
> > Bill
> >
> > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > Q1: Yes, if you don't have some sort of wiring harness that came with
> the
> > > new air horn, you will have to make that wire and any other that is
> > missing.
> > > Q2: The only stock wires available would be from the horn button to
the
> > > stock horns. The switch would normally go under or on the dash and is
> > only
> > > necessary if you want to maintain use of the stock horn.
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > Hi all,
> > > >
> > > > 83 CJ7, 258, I6
> > > >
> > > > I'm trying to wire an air horn which was on my jeep when I bought
it
> > but
> > > > never hooked up correctly.
> > > >
> > > > I have the following diagram I've been using to hook it up and I
have
> a
> > > > couple of questions.
> > > >
> > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > >
> > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> don't
> > > > have this wire. Is this something I should fabricate or can I buy
it?
> > > >
> > > > Q2: Where do I find the wire which goes to the 85 pole from the
wiring
> > > > harness? Where would the single pole, double throw switch be?
Under
> > dash
> > > > or behind firewall? Should I also fabricate this wire or should it
be
> > in
> > > > the wiring harness?
> > > >
> > > > Thanks for any help,
> > > >
> > > >
> > > > Bill
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Guest
Posts: n/a
Re: Wiring a horn
Then you are hearing the OEM horn relay. I would take the wire off the
stock horn and put it on the air horn and be done with it. Or alternatively,
take the wire off the stock horn and put it on the new air horn relay
position 85.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brgbbs$2rtc9$1@ID-193866.news.uni-berlin.de...
> The clicking sound is coming from under my dash. I listened outside in
the
> engine compartment and I couldn't hear it that well. It sounds like it's
> coming from around the light switch but sounds play tricks on you under
> there.
>
> How do I find the horn button wire?
>
> Thanks,
>
> Bill
>
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:H5OCb.8520$7O.937@news01.roc.ny...
> > If you don't want the switch, take the horn button wire straight to 85
on
> > the relay. The clicking sound you hear may be the relay.
> >
> > JimG
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > > Don't I need the switch to activate the air horn? How else would this
> > > happen?
> > >
> > > Thanks,
> > >
> > > Bill
> > >
> > > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > > Q1: Yes, if you don't have some sort of wiring harness that came
with
> > the
> > > > new air horn, you will have to make that wire and any other that is
> > > missing.
> > > > Q2: The only stock wires available would be from the horn button to
> the
> > > > stock horns. The switch would normally go under or on the dash and
is
> > > only
> > > > necessary if you want to maintain use of the stock horn.
> > > >
> > > > --
> > > > JimG
> > > > 80' CJ-7 258 CID
> > > > 35" BFG MT on 15x10 Centerlines
> > > > D44 Rear, Dana 30 Front. SOA
> > > > 4.56 Gears, LockRight F&R
> > > > Dana 300 w/4:1 & Currie twin sticks
> > > > Warn X8000i w/ dual batteries
> > > >
> > > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > > Hi all,
> > > > >
> > > > > 83 CJ7, 258, I6
> > > > >
> > > > > I'm trying to wire an air horn which was on my jeep when I
bought
> it
> > > but
> > > > > never hooked up correctly.
> > > > >
> > > > > I have the following diagram I've been using to hook it up and I
> have
> > a
> > > > > couple of questions.
> > > > >
> > > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > > >
> > > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> > don't
> > > > > have this wire. Is this something I should fabricate or can I buy
> it?
> > > > >
> > > > > Q2: Where do I find the wire which goes to the 85 pole from the
> wiring
> > > > > harness? Where would the single pole, double throw switch be?
> Under
> > > dash
> > > > > or behind firewall? Should I also fabricate this wire or should
it
> be
> > > in
> > > > > the wiring harness?
> > > > >
> > > > > Thanks for any help,
> > > > >
> > > > >
> > > > > Bill
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
stock horn and put it on the air horn and be done with it. Or alternatively,
take the wire off the stock horn and put it on the new air horn relay
position 85.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brgbbs$2rtc9$1@ID-193866.news.uni-berlin.de...
> The clicking sound is coming from under my dash. I listened outside in
the
> engine compartment and I couldn't hear it that well. It sounds like it's
> coming from around the light switch but sounds play tricks on you under
> there.
>
> How do I find the horn button wire?
>
> Thanks,
>
> Bill
>
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:H5OCb.8520$7O.937@news01.roc.ny...
> > If you don't want the switch, take the horn button wire straight to 85
on
> > the relay. The clicking sound you hear may be the relay.
> >
> > JimG
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > > Don't I need the switch to activate the air horn? How else would this
> > > happen?
> > >
> > > Thanks,
> > >
> > > Bill
> > >
> > > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > > Q1: Yes, if you don't have some sort of wiring harness that came
with
> > the
> > > > new air horn, you will have to make that wire and any other that is
> > > missing.
> > > > Q2: The only stock wires available would be from the horn button to
> the
> > > > stock horns. The switch would normally go under or on the dash and
is
> > > only
> > > > necessary if you want to maintain use of the stock horn.
> > > >
> > > > --
> > > > JimG
> > > > 80' CJ-7 258 CID
> > > > 35" BFG MT on 15x10 Centerlines
> > > > D44 Rear, Dana 30 Front. SOA
> > > > 4.56 Gears, LockRight F&R
> > > > Dana 300 w/4:1 & Currie twin sticks
> > > > Warn X8000i w/ dual batteries
> > > >
> > > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > > Hi all,
> > > > >
> > > > > 83 CJ7, 258, I6
> > > > >
> > > > > I'm trying to wire an air horn which was on my jeep when I
bought
> it
> > > but
> > > > > never hooked up correctly.
> > > > >
> > > > > I have the following diagram I've been using to hook it up and I
> have
> > a
> > > > > couple of questions.
> > > > >
> > > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > > >
> > > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> > don't
> > > > > have this wire. Is this something I should fabricate or can I buy
> it?
> > > > >
> > > > > Q2: Where do I find the wire which goes to the 85 pole from the
> wiring
> > > > > harness? Where would the single pole, double throw switch be?
> Under
> > > dash
> > > > > or behind firewall? Should I also fabricate this wire or should
it
> be
> > > in
> > > > > the wiring harness?
> > > > >
> > > > > Thanks for any help,
> > > > >
> > > > >
> > > > > Bill
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Guest
Posts: n/a
Re: Wiring a horn
Then you are hearing the OEM horn relay. I would take the wire off the
stock horn and put it on the air horn and be done with it. Or alternatively,
take the wire off the stock horn and put it on the new air horn relay
position 85.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brgbbs$2rtc9$1@ID-193866.news.uni-berlin.de...
> The clicking sound is coming from under my dash. I listened outside in
the
> engine compartment and I couldn't hear it that well. It sounds like it's
> coming from around the light switch but sounds play tricks on you under
> there.
>
> How do I find the horn button wire?
>
> Thanks,
>
> Bill
>
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:H5OCb.8520$7O.937@news01.roc.ny...
> > If you don't want the switch, take the horn button wire straight to 85
on
> > the relay. The clicking sound you hear may be the relay.
> >
> > JimG
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > > Don't I need the switch to activate the air horn? How else would this
> > > happen?
> > >
> > > Thanks,
> > >
> > > Bill
> > >
> > > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > > Q1: Yes, if you don't have some sort of wiring harness that came
with
> > the
> > > > new air horn, you will have to make that wire and any other that is
> > > missing.
> > > > Q2: The only stock wires available would be from the horn button to
> the
> > > > stock horns. The switch would normally go under or on the dash and
is
> > > only
> > > > necessary if you want to maintain use of the stock horn.
> > > >
> > > > --
> > > > JimG
> > > > 80' CJ-7 258 CID
> > > > 35" BFG MT on 15x10 Centerlines
> > > > D44 Rear, Dana 30 Front. SOA
> > > > 4.56 Gears, LockRight F&R
> > > > Dana 300 w/4:1 & Currie twin sticks
> > > > Warn X8000i w/ dual batteries
> > > >
> > > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > > Hi all,
> > > > >
> > > > > 83 CJ7, 258, I6
> > > > >
> > > > > I'm trying to wire an air horn which was on my jeep when I
bought
> it
> > > but
> > > > > never hooked up correctly.
> > > > >
> > > > > I have the following diagram I've been using to hook it up and I
> have
> > a
> > > > > couple of questions.
> > > > >
> > > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > > >
> > > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> > don't
> > > > > have this wire. Is this something I should fabricate or can I buy
> it?
> > > > >
> > > > > Q2: Where do I find the wire which goes to the 85 pole from the
> wiring
> > > > > harness? Where would the single pole, double throw switch be?
> Under
> > > dash
> > > > > or behind firewall? Should I also fabricate this wire or should
it
> be
> > > in
> > > > > the wiring harness?
> > > > >
> > > > > Thanks for any help,
> > > > >
> > > > >
> > > > > Bill
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
stock horn and put it on the air horn and be done with it. Or alternatively,
take the wire off the stock horn and put it on the new air horn relay
position 85.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brgbbs$2rtc9$1@ID-193866.news.uni-berlin.de...
> The clicking sound is coming from under my dash. I listened outside in
the
> engine compartment and I couldn't hear it that well. It sounds like it's
> coming from around the light switch but sounds play tricks on you under
> there.
>
> How do I find the horn button wire?
>
> Thanks,
>
> Bill
>
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:H5OCb.8520$7O.937@news01.roc.ny...
> > If you don't want the switch, take the horn button wire straight to 85
on
> > the relay. The clicking sound you hear may be the relay.
> >
> > JimG
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > > Don't I need the switch to activate the air horn? How else would this
> > > happen?
> > >
> > > Thanks,
> > >
> > > Bill
> > >
> > > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > > Q1: Yes, if you don't have some sort of wiring harness that came
with
> > the
> > > > new air horn, you will have to make that wire and any other that is
> > > missing.
> > > > Q2: The only stock wires available would be from the horn button to
> the
> > > > stock horns. The switch would normally go under or on the dash and
is
> > > only
> > > > necessary if you want to maintain use of the stock horn.
> > > >
> > > > --
> > > > JimG
> > > > 80' CJ-7 258 CID
> > > > 35" BFG MT on 15x10 Centerlines
> > > > D44 Rear, Dana 30 Front. SOA
> > > > 4.56 Gears, LockRight F&R
> > > > Dana 300 w/4:1 & Currie twin sticks
> > > > Warn X8000i w/ dual batteries
> > > >
> > > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > > Hi all,
> > > > >
> > > > > 83 CJ7, 258, I6
> > > > >
> > > > > I'm trying to wire an air horn which was on my jeep when I
bought
> it
> > > but
> > > > > never hooked up correctly.
> > > > >
> > > > > I have the following diagram I've been using to hook it up and I
> have
> > a
> > > > > couple of questions.
> > > > >
> > > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > > >
> > > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> > don't
> > > > > have this wire. Is this something I should fabricate or can I buy
> it?
> > > > >
> > > > > Q2: Where do I find the wire which goes to the 85 pole from the
> wiring
> > > > > harness? Where would the single pole, double throw switch be?
> Under
> > > dash
> > > > > or behind firewall? Should I also fabricate this wire or should
it
> be
> > > in
> > > > > the wiring harness?
> > > > >
> > > > > Thanks for any help,
> > > > >
> > > > >
> > > > > Bill
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Guest
Posts: n/a
Re: Wiring a horn
Then you are hearing the OEM horn relay. I would take the wire off the
stock horn and put it on the air horn and be done with it. Or alternatively,
take the wire off the stock horn and put it on the new air horn relay
position 85.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brgbbs$2rtc9$1@ID-193866.news.uni-berlin.de...
> The clicking sound is coming from under my dash. I listened outside in
the
> engine compartment and I couldn't hear it that well. It sounds like it's
> coming from around the light switch but sounds play tricks on you under
> there.
>
> How do I find the horn button wire?
>
> Thanks,
>
> Bill
>
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:H5OCb.8520$7O.937@news01.roc.ny...
> > If you don't want the switch, take the horn button wire straight to 85
on
> > the relay. The clicking sound you hear may be the relay.
> >
> > JimG
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > > Don't I need the switch to activate the air horn? How else would this
> > > happen?
> > >
> > > Thanks,
> > >
> > > Bill
> > >
> > > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > > Q1: Yes, if you don't have some sort of wiring harness that came
with
> > the
> > > > new air horn, you will have to make that wire and any other that is
> > > missing.
> > > > Q2: The only stock wires available would be from the horn button to
> the
> > > > stock horns. The switch would normally go under or on the dash and
is
> > > only
> > > > necessary if you want to maintain use of the stock horn.
> > > >
> > > > --
> > > > JimG
> > > > 80' CJ-7 258 CID
> > > > 35" BFG MT on 15x10 Centerlines
> > > > D44 Rear, Dana 30 Front. SOA
> > > > 4.56 Gears, LockRight F&R
> > > > Dana 300 w/4:1 & Currie twin sticks
> > > > Warn X8000i w/ dual batteries
> > > >
> > > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > > Hi all,
> > > > >
> > > > > 83 CJ7, 258, I6
> > > > >
> > > > > I'm trying to wire an air horn which was on my jeep when I
bought
> it
> > > but
> > > > > never hooked up correctly.
> > > > >
> > > > > I have the following diagram I've been using to hook it up and I
> have
> > a
> > > > > couple of questions.
> > > > >
> > > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > > >
> > > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> > don't
> > > > > have this wire. Is this something I should fabricate or can I buy
> it?
> > > > >
> > > > > Q2: Where do I find the wire which goes to the 85 pole from the
> wiring
> > > > > harness? Where would the single pole, double throw switch be?
> Under
> > > dash
> > > > > or behind firewall? Should I also fabricate this wire or should
it
> be
> > > in
> > > > > the wiring harness?
> > > > >
> > > > > Thanks for any help,
> > > > >
> > > > >
> > > > > Bill
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
stock horn and put it on the air horn and be done with it. Or alternatively,
take the wire off the stock horn and put it on the new air horn relay
position 85.
JimG
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brgbbs$2rtc9$1@ID-193866.news.uni-berlin.de...
> The clicking sound is coming from under my dash. I listened outside in
the
> engine compartment and I couldn't hear it that well. It sounds like it's
> coming from around the light switch but sounds play tricks on you under
> there.
>
> How do I find the horn button wire?
>
> Thanks,
>
> Bill
>
>
> "JimG" <jimg@cj7_2muchspam.com> wrote in message
> news:H5OCb.8520$7O.937@news01.roc.ny...
> > If you don't want the switch, take the horn button wire straight to 85
on
> > the relay. The clicking sound you hear may be the relay.
> >
> > JimG
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brga51$31d7l$1@ID-193866.news.uni-berlin.de...
> > > Don't I need the switch to activate the air horn? How else would this
> > > happen?
> > >
> > > Thanks,
> > >
> > > Bill
> > >
> > > "JimG" <jimg@cj7_2muchspam.com> wrote in message
> > > news:CONCb.8517$4J.7465@news01.roc.ny...
> > > > Q1: Yes, if you don't have some sort of wiring harness that came
with
> > the
> > > > new air horn, you will have to make that wire and any other that is
> > > missing.
> > > > Q2: The only stock wires available would be from the horn button to
> the
> > > > stock horns. The switch would normally go under or on the dash and
is
> > > only
> > > > necessary if you want to maintain use of the stock horn.
> > > >
> > > > --
> > > > JimG
> > > > 80' CJ-7 258 CID
> > > > 35" BFG MT on 15x10 Centerlines
> > > > D44 Rear, Dana 30 Front. SOA
> > > > 4.56 Gears, LockRight F&R
> > > > Dana 300 w/4:1 & Currie twin sticks
> > > > Warn X8000i w/ dual batteries
> > > >
> > > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > > news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > > > > Hi all,
> > > > >
> > > > > 83 CJ7, 258, I6
> > > > >
> > > > > I'm trying to wire an air horn which was on my jeep when I
bought
> it
> > > but
> > > > > never hooked up correctly.
> > > > >
> > > > > I have the following diagram I've been using to hook it up and I
> have
> > a
> > > > > couple of questions.
> > > > >
> > > > > http://members.bigvalley.net/wuji/hornwiring.jpg
> > > > >
> > > > > Q1: From the positive battery pole to the 30 pole on the switch, I
> > don't
> > > > > have this wire. Is this something I should fabricate or can I buy
> it?
> > > > >
> > > > > Q2: Where do I find the wire which goes to the 85 pole from the
> wiring
> > > > > harness? Where would the single pole, double throw switch be?
> Under
> > > dash
> > > > > or behind firewall? Should I also fabricate this wire or should
it
> be
> > > in
> > > > > the wiring harness?
> > > > >
> > > > > Thanks for any help,
> > > > >
> > > > >
> > > > > Bill
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Guest
Posts: n/a
Re: Wiring a horn
There is usually a delay with air horns.. your stock horn will sound before
the air trumpets do anything.. dump your stock horn and attach the horn feed
to the compressor..
--
History is only the past if we choose to do nothing about it..
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
the air trumpets do anything.. dump your stock horn and attach the horn feed
to the compressor..
--
History is only the past if we choose to do nothing about it..
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>