Wiring a horn
12-13-2003, 06:48 PM
#1
Guest
Posts: n/a
Wiring a horn
Hi all,
83 CJ7, 258, I6
I'm trying to wire an air horn which was on my jeep when I bought it but
never hooked up correctly.
I have the following diagram I've been using to hook it up and I have a
couple of questions.
http://members.bigvalley.net/wuji/hornwiring.jpg
Q1: From the positive battery pole to the 30 pole on the switch, I don't
have this wire. Is this something I should fabricate or can I buy it?
Q2: Where do I find the wire which goes to the 85 pole from the wiring
harness? Where would the single pole, double throw switch be? Under dash
or behind firewall? Should I also fabricate this wire or should it be in
the wiring harness?
Thanks for any help,
Bill
83 CJ7, 258, I6
I'm trying to wire an air horn which was on my jeep when I bought it but
never hooked up correctly.
I have the following diagram I've been using to hook it up and I have a
couple of questions.
http://members.bigvalley.net/wuji/hornwiring.jpg
Q1: From the positive battery pole to the 30 pole on the switch, I don't
have this wire. Is this something I should fabricate or can I buy it?
Q2: Where do I find the wire which goes to the 85 pole from the wiring
harness? Where would the single pole, double throw switch be? Under dash
or behind firewall? Should I also fabricate this wire or should it be in
the wiring harness?
Thanks for any help,
Bill
12-13-2003, 07:03 PM
#2
Guest
Posts: n/a
Re: Wiring a horn
One other thing. When I press on the horn I hear a clicking noise but I
can't narrow down it's location. Is this the single pole double throw
switch?
Thanks,
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
can't narrow down it's location. Is this the single pole double throw
switch?
Thanks,
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
12-13-2003, 07:03 PM
#3
Guest
Posts: n/a
Re: Wiring a horn
One other thing. When I press on the horn I hear a clicking noise but I
can't narrow down it's location. Is this the single pole double throw
switch?
Thanks,
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
can't narrow down it's location. Is this the single pole double throw
switch?
Thanks,
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
12-13-2003, 07:03 PM
#4
Guest
Posts: n/a
Re: Wiring a horn
One other thing. When I press on the horn I hear a clicking noise but I
can't narrow down it's location. Is this the single pole double throw
switch?
Thanks,
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
can't narrow down it's location. Is this the single pole double throw
switch?
Thanks,
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
12-13-2003, 07:04 PM
#5
Guest
Posts: n/a
Re: Wiring a horn
Q1: Yes, if you don't have some sort of wiring harness that came with the
new air horn, you will have to make that wire and any other that is missing.
Q2: The only stock wires available would be from the horn button to the
stock horns. The switch would normally go under or on the dash and is only
necessary if you want to maintain use of the stock horn.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
new air horn, you will have to make that wire and any other that is missing.
Q2: The only stock wires available would be from the horn button to the
stock horns. The switch would normally go under or on the dash and is only
necessary if you want to maintain use of the stock horn.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
12-13-2003, 07:04 PM
#6
Guest
Posts: n/a
Re: Wiring a horn
Q1: Yes, if you don't have some sort of wiring harness that came with the
new air horn, you will have to make that wire and any other that is missing.
Q2: The only stock wires available would be from the horn button to the
stock horns. The switch would normally go under or on the dash and is only
necessary if you want to maintain use of the stock horn.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
new air horn, you will have to make that wire and any other that is missing.
Q2: The only stock wires available would be from the horn button to the
stock horns. The switch would normally go under or on the dash and is only
necessary if you want to maintain use of the stock horn.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
12-13-2003, 07:04 PM
#7
Guest
Posts: n/a
Re: Wiring a horn
Q1: Yes, if you don't have some sort of wiring harness that came with the
new air horn, you will have to make that wire and any other that is missing.
Q2: The only stock wires available would be from the horn button to the
stock horns. The switch would normally go under or on the dash and is only
necessary if you want to maintain use of the stock horn.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
new air horn, you will have to make that wire and any other that is missing.
Q2: The only stock wires available would be from the horn button to the
stock horns. The switch would normally go under or on the dash and is only
necessary if you want to maintain use of the stock horn.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> 83 CJ7, 258, I6
>
> I'm trying to wire an air horn which was on my jeep when I bought it but
> never hooked up correctly.
>
> I have the following diagram I've been using to hook it up and I have a
> couple of questions.
>
> http://members.bigvalley.net/wuji/hornwiring.jpg
>
> Q1: From the positive battery pole to the 30 pole on the switch, I don't
> have this wire. Is this something I should fabricate or can I buy it?
>
> Q2: Where do I find the wire which goes to the 85 pole from the wiring
> harness? Where would the single pole, double throw switch be? Under dash
> or behind firewall? Should I also fabricate this wire or should it be in
> the wiring harness?
>
> Thanks for any help,
>
>
> Bill
>
>
>
>
12-13-2003, 07:16 PM
#8
Guest
Posts: n/a
Re: Wiring a horn
Don't I need the switch to activate the air horn? How else would this
happen?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:CONCb.8517$4J.7465@news01.roc.ny...
> Q1: Yes, if you don't have some sort of wiring harness that came with the
> new air horn, you will have to make that wire and any other that is
missing.
> Q2: The only stock wires available would be from the horn button to the
> stock horns. The switch would normally go under or on the dash and is
only
> necessary if you want to maintain use of the stock horn.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > Hi all,
> >
> > 83 CJ7, 258, I6
> >
> > I'm trying to wire an air horn which was on my jeep when I bought it
but
> > never hooked up correctly.
> >
> > I have the following diagram I've been using to hook it up and I have a
> > couple of questions.
> >
> > http://members.bigvalley.net/wuji/hornwiring.jpg
> >
> > Q1: From the positive battery pole to the 30 pole on the switch, I don't
> > have this wire. Is this something I should fabricate or can I buy it?
> >
> > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > harness? Where would the single pole, double throw switch be? Under
dash
> > or behind firewall? Should I also fabricate this wire or should it be
in
> > the wiring harness?
> >
> > Thanks for any help,
> >
> >
> > Bill
> >
> >
> >
> >
>
>
happen?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:CONCb.8517$4J.7465@news01.roc.ny...
> Q1: Yes, if you don't have some sort of wiring harness that came with the
> new air horn, you will have to make that wire and any other that is
missing.
> Q2: The only stock wires available would be from the horn button to the
> stock horns. The switch would normally go under or on the dash and is
only
> necessary if you want to maintain use of the stock horn.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > Hi all,
> >
> > 83 CJ7, 258, I6
> >
> > I'm trying to wire an air horn which was on my jeep when I bought it
but
> > never hooked up correctly.
> >
> > I have the following diagram I've been using to hook it up and I have a
> > couple of questions.
> >
> > http://members.bigvalley.net/wuji/hornwiring.jpg
> >
> > Q1: From the positive battery pole to the 30 pole on the switch, I don't
> > have this wire. Is this something I should fabricate or can I buy it?
> >
> > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > harness? Where would the single pole, double throw switch be? Under
dash
> > or behind firewall? Should I also fabricate this wire or should it be
in
> > the wiring harness?
> >
> > Thanks for any help,
> >
> >
> > Bill
> >
> >
> >
> >
>
>
12-13-2003, 07:16 PM
#9
Guest
Posts: n/a
Re: Wiring a horn
Don't I need the switch to activate the air horn? How else would this
happen?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:CONCb.8517$4J.7465@news01.roc.ny...
> Q1: Yes, if you don't have some sort of wiring harness that came with the
> new air horn, you will have to make that wire and any other that is
missing.
> Q2: The only stock wires available would be from the horn button to the
> stock horns. The switch would normally go under or on the dash and is
only
> necessary if you want to maintain use of the stock horn.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > Hi all,
> >
> > 83 CJ7, 258, I6
> >
> > I'm trying to wire an air horn which was on my jeep when I bought it
but
> > never hooked up correctly.
> >
> > I have the following diagram I've been using to hook it up and I have a
> > couple of questions.
> >
> > http://members.bigvalley.net/wuji/hornwiring.jpg
> >
> > Q1: From the positive battery pole to the 30 pole on the switch, I don't
> > have this wire. Is this something I should fabricate or can I buy it?
> >
> > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > harness? Where would the single pole, double throw switch be? Under
dash
> > or behind firewall? Should I also fabricate this wire or should it be
in
> > the wiring harness?
> >
> > Thanks for any help,
> >
> >
> > Bill
> >
> >
> >
> >
>
>
happen?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:CONCb.8517$4J.7465@news01.roc.ny...
> Q1: Yes, if you don't have some sort of wiring harness that came with the
> new air horn, you will have to make that wire and any other that is
missing.
> Q2: The only stock wires available would be from the horn button to the
> stock horns. The switch would normally go under or on the dash and is
only
> necessary if you want to maintain use of the stock horn.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > Hi all,
> >
> > 83 CJ7, 258, I6
> >
> > I'm trying to wire an air horn which was on my jeep when I bought it
but
> > never hooked up correctly.
> >
> > I have the following diagram I've been using to hook it up and I have a
> > couple of questions.
> >
> > http://members.bigvalley.net/wuji/hornwiring.jpg
> >
> > Q1: From the positive battery pole to the 30 pole on the switch, I don't
> > have this wire. Is this something I should fabricate or can I buy it?
> >
> > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > harness? Where would the single pole, double throw switch be? Under
dash
> > or behind firewall? Should I also fabricate this wire or should it be
in
> > the wiring harness?
> >
> > Thanks for any help,
> >
> >
> > Bill
> >
> >
> >
> >
>
>
12-13-2003, 07:16 PM
#10
Guest
Posts: n/a
Re: Wiring a horn
Don't I need the switch to activate the air horn? How else would this
happen?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:CONCb.8517$4J.7465@news01.roc.ny...
> Q1: Yes, if you don't have some sort of wiring harness that came with the
> new air horn, you will have to make that wire and any other that is
missing.
> Q2: The only stock wires available would be from the horn button to the
> stock horns. The switch would normally go under or on the dash and is
only
> necessary if you want to maintain use of the stock horn.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > Hi all,
> >
> > 83 CJ7, 258, I6
> >
> > I'm trying to wire an air horn which was on my jeep when I bought it
but
> > never hooked up correctly.
> >
> > I have the following diagram I've been using to hook it up and I have a
> > couple of questions.
> >
> > http://members.bigvalley.net/wuji/hornwiring.jpg
> >
> > Q1: From the positive battery pole to the 30 pole on the switch, I don't
> > have this wire. Is this something I should fabricate or can I buy it?
> >
> > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > harness? Where would the single pole, double throw switch be? Under
dash
> > or behind firewall? Should I also fabricate this wire or should it be
in
> > the wiring harness?
> >
> > Thanks for any help,
> >
> >
> > Bill
> >
> >
> >
> >
>
>
happen?
Thanks,
Bill
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:CONCb.8517$4J.7465@news01.roc.ny...
> Q1: Yes, if you don't have some sort of wiring harness that came with the
> new air horn, you will have to make that wire and any other that is
missing.
> Q2: The only stock wires available would be from the horn button to the
> stock horns. The switch would normally go under or on the dash and is
only
> necessary if you want to maintain use of the stock horn.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:brg8hb$33skf$1@ID-193866.news.uni-berlin.de...
> > Hi all,
> >
> > 83 CJ7, 258, I6
> >
> > I'm trying to wire an air horn which was on my jeep when I bought it
but
> > never hooked up correctly.
> >
> > I have the following diagram I've been using to hook it up and I have a
> > couple of questions.
> >
> > http://members.bigvalley.net/wuji/hornwiring.jpg
> >
> > Q1: From the positive battery pole to the 30 pole on the switch, I don't
> > have this wire. Is this something I should fabricate or can I buy it?
> >
> > Q2: Where do I find the wire which goes to the 85 pole from the wiring
> > harness? Where would the single pole, double throw switch be? Under
dash
> > or behind firewall? Should I also fabricate this wire or should it be
in
> > the wiring harness?
> >
> > Thanks for any help,
> >
> >
> > Bill
> >
> >
> >
> >
>
>