Winch security
01-21-2005, 04:30 AM
#1
Guest
Posts: n/a
Winch security
ive mounted my winch, with a warn winch plate,
now ive a question, how does one secure the winch and plate from
thieves?
do i grind a spot on a set of bolts and tack-weld?
how are any of you guys doing it?
hate to go hicking and come back with my front bumber empty,
johnp
now ive a question, how does one secure the winch and plate from
thieves?
do i grind a spot on a set of bolts and tack-weld?
how are any of you guys doing it?
hate to go hicking and come back with my front bumber empty,
johnp
01-21-2005, 10:59 AM
#2
Guest
Posts: n/a
Re: Winch security
01-21-2005, 10:59 AM
#3
Guest
Posts: n/a
Re: Winch security
01-21-2005, 10:59 AM
#4
Guest
Posts: n/a
Re: Winch security
01-21-2005, 11:13 AM
#5
Guest
Posts: n/a
Re: Winch security
LOL!
Ya right. I doubt that would take a hit from a rubber mallet and
survive, let alone a rock or steel hammer.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Troy wrote:
>
> This SEEMS like it may work
>
> http://www.4wheelerssupply.com/catal...ducts_id/70731
Ya right. I doubt that would take a hit from a rubber mallet and
survive, let alone a rock or steel hammer.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Troy wrote:
>
> This SEEMS like it may work
>
> http://www.4wheelerssupply.com/catal...ducts_id/70731
01-21-2005, 11:13 AM
#6
Guest
Posts: n/a
Re: Winch security
LOL!
Ya right. I doubt that would take a hit from a rubber mallet and
survive, let alone a rock or steel hammer.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Troy wrote:
>
> This SEEMS like it may work
>
> http://www.4wheelerssupply.com/catal...ducts_id/70731
Ya right. I doubt that would take a hit from a rubber mallet and
survive, let alone a rock or steel hammer.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Troy wrote:
>
> This SEEMS like it may work
>
> http://www.4wheelerssupply.com/catal...ducts_id/70731
01-21-2005, 11:13 AM
#7
Guest
Posts: n/a
Re: Winch security
LOL!
Ya right. I doubt that would take a hit from a rubber mallet and
survive, let alone a rock or steel hammer.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Troy wrote:
>
> This SEEMS like it may work
>
> http://www.4wheelerssupply.com/catal...ducts_id/70731
Ya right. I doubt that would take a hit from a rubber mallet and
survive, let alone a rock or steel hammer.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Troy wrote:
>
> This SEEMS like it may work
>
> http://www.4wheelerssupply.com/catal...ducts_id/70731
01-21-2005, 01:33 PM
#8
Guest
Posts: n/a
Re: Winch security
Give it a weld. And make sure is covered by insurance and documented so it
can be replaced.
<scopenutt@yahoo.com> wrote in message
news:1106299841.775139.311650@f14g2000cwb.googlegr oups.com...
> ive mounted my winch, with a warn winch plate,
> now ive a question, how does one secure the winch and plate from
> thieves?
> do i grind a spot on a set of bolts and tack-weld?
> how are any of you guys doing it?
> hate to go hicking and come back with my front bumber empty,
> johnp
>
can be replaced.
<scopenutt@yahoo.com> wrote in message
news:1106299841.775139.311650@f14g2000cwb.googlegr oups.com...
> ive mounted my winch, with a warn winch plate,
> now ive a question, how does one secure the winch and plate from
> thieves?
> do i grind a spot on a set of bolts and tack-weld?
> how are any of you guys doing it?
> hate to go hicking and come back with my front bumber empty,
> johnp
>
01-21-2005, 01:33 PM
#9
Guest
Posts: n/a
Re: Winch security
Give it a weld. And make sure is covered by insurance and documented so it
can be replaced.
<scopenutt@yahoo.com> wrote in message
news:1106299841.775139.311650@f14g2000cwb.googlegr oups.com...
> ive mounted my winch, with a warn winch plate,
> now ive a question, how does one secure the winch and plate from
> thieves?
> do i grind a spot on a set of bolts and tack-weld?
> how are any of you guys doing it?
> hate to go hicking and come back with my front bumber empty,
> johnp
>
can be replaced.
<scopenutt@yahoo.com> wrote in message
news:1106299841.775139.311650@f14g2000cwb.googlegr oups.com...
> ive mounted my winch, with a warn winch plate,
> now ive a question, how does one secure the winch and plate from
> thieves?
> do i grind a spot on a set of bolts and tack-weld?
> how are any of you guys doing it?
> hate to go hicking and come back with my front bumber empty,
> johnp
>
01-21-2005, 01:33 PM
#10
Guest
Posts: n/a
Re: Winch security
Give it a weld. And make sure is covered by insurance and documented so it
can be replaced.
<scopenutt@yahoo.com> wrote in message
news:1106299841.775139.311650@f14g2000cwb.googlegr oups.com...
> ive mounted my winch, with a warn winch plate,
> now ive a question, how does one secure the winch and plate from
> thieves?
> do i grind a spot on a set of bolts and tack-weld?
> how are any of you guys doing it?
> hate to go hicking and come back with my front bumber empty,
> johnp
>
can be replaced.
<scopenutt@yahoo.com> wrote in message
news:1106299841.775139.311650@f14g2000cwb.googlegr oups.com...
> ive mounted my winch, with a warn winch plate,
> now ive a question, how does one secure the winch and plate from
> thieves?
> do i grind a spot on a set of bolts and tack-weld?
> how are any of you guys doing it?
> hate to go hicking and come back with my front bumber empty,
> johnp
>