|
Re: Winch mounting plate layout - Anyone have one?
I will try to find you a picture. The one I bought was 3/16" steel from
warn. "Kate" <svtkate@spam.filter> wrote in message news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. .. > Thanks Carl. > I'll go in to town tomorrow and see what I can find. > Not much in the area for 4x4 shops, and the ONE that we have carries very > little in stock. > > Kate > > "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message > news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com... > Kate, > > If you go to a 4x4 shop and look at one, you'll understand. It sits on > top of the frame rails on front of the grille, and bolts down to the > frame. > Center the winch on the place, mark the winche's holes, and drill. Bolt > and > be happy. > > Carl > > > "Kate" <svtkate@spam.filter> wrote in message > news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. .. >> What a happy day. >> My Ex husband and his wife came to visit a few weeks ago. They took our >> littlest Jeeper home for three weeks and he just brought him home last >> night. >> While they were here he told me that he had a Warn winch he would give me >> for my Jeep. What a guy! >> >> Last night, the winch came with him. It's a >> Warn M8000, complete. Only been used twice. >> http://www.warn.com/truck/winches/src/M8000.shtml >> >> I've been looking at mounting plates and find that they are a bit pricey. >> Since the hubster is a helluva fabricator I am hoping that someone has a >> layout they would be willing to share so that we don't have to reinvent >> the >> wheel (so to speak) >> >> Thanks in advance :ŹD >> >> -- >> Kate >> 2O|||||||O6 Rubicon >> ______ >> /l ,[____], >> l-L -OlllllllO- >> ()_)-()_)--)_) >> >> The shortest distance between two points, >> can be a lot more fun in a Jeep! >> >> > > > |
Re: Winch mounting plate layout - Anyone have one?
I will try to find you a picture. The one I bought was 3/16" steel from
warn. "Kate" <svtkate@spam.filter> wrote in message news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. .. > Thanks Carl. > I'll go in to town tomorrow and see what I can find. > Not much in the area for 4x4 shops, and the ONE that we have carries very > little in stock. > > Kate > > "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message > news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com... > Kate, > > If you go to a 4x4 shop and look at one, you'll understand. It sits on > top of the frame rails on front of the grille, and bolts down to the > frame. > Center the winch on the place, mark the winche's holes, and drill. Bolt > and > be happy. > > Carl > > > "Kate" <svtkate@spam.filter> wrote in message > news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. .. >> What a happy day. >> My Ex husband and his wife came to visit a few weeks ago. They took our >> littlest Jeeper home for three weeks and he just brought him home last >> night. >> While they were here he told me that he had a Warn winch he would give me >> for my Jeep. What a guy! >> >> Last night, the winch came with him. It's a >> Warn M8000, complete. Only been used twice. >> http://www.warn.com/truck/winches/src/M8000.shtml >> >> I've been looking at mounting plates and find that they are a bit pricey. >> Since the hubster is a helluva fabricator I am hoping that someone has a >> layout they would be willing to share so that we don't have to reinvent >> the >> wheel (so to speak) >> >> Thanks in advance :ŹD >> >> -- >> Kate >> 2O|||||||O6 Rubicon >> ______ >> /l ,[____], >> l-L -OlllllllO- >> ()_)-()_)--)_) >> >> The shortest distance between two points, >> can be a lot more fun in a Jeep! >> >> > > > |
Re: Winch mounting plate layout - Anyone have one?
I will try to find you a picture. The one I bought was 3/16" steel from
warn. "Kate" <svtkate@spam.filter> wrote in message news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. .. > Thanks Carl. > I'll go in to town tomorrow and see what I can find. > Not much in the area for 4x4 shops, and the ONE that we have carries very > little in stock. > > Kate > > "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message > news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com... > Kate, > > If you go to a 4x4 shop and look at one, you'll understand. It sits on > top of the frame rails on front of the grille, and bolts down to the > frame. > Center the winch on the place, mark the winche's holes, and drill. Bolt > and > be happy. > > Carl > > > "Kate" <svtkate@spam.filter> wrote in message > news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. .. >> What a happy day. >> My Ex husband and his wife came to visit a few weeks ago. They took our >> littlest Jeeper home for three weeks and he just brought him home last >> night. >> While they were here he told me that he had a Warn winch he would give me >> for my Jeep. What a guy! >> >> Last night, the winch came with him. It's a >> Warn M8000, complete. Only been used twice. >> http://www.warn.com/truck/winches/src/M8000.shtml >> >> I've been looking at mounting plates and find that they are a bit pricey. >> Since the hubster is a helluva fabricator I am hoping that someone has a >> layout they would be willing to share so that we don't have to reinvent >> the >> wheel (so to speak) >> >> Thanks in advance :ŹD >> >> -- >> Kate >> 2O|||||||O6 Rubicon >> ______ >> /l ,[____], >> l-L -OlllllllO- >> ()_)-()_)--)_) >> >> The shortest distance between two points, >> can be a lot more fun in a Jeep! >> >> > > > |
Re: Winch mounting plate layout - Anyone have one?
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like. Greg "Kate" <svtkate@spam.filter> wrote in message news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. .. > What a happy day. > My Ex husband and his wife came to visit a few weeks ago. They took our > littlest Jeeper home for three weeks and he just brought him home last > night. > While they were here he told me that he had a Warn winch he would give me > for my Jeep. What a guy! > > Last night, the winch came with him. It's a > Warn M8000, complete. Only been used twice. > http://www.warn.com/truck/winches/src/M8000.shtml > > I've been looking at mounting plates and find that they are a bit pricey. > Since the hubster is a helluva fabricator I am hoping that someone has a > layout they would be willing to share so that we don't have to reinvent > the > wheel (so to speak) > > Thanks in advance :ŹD > > -- > Kate > 2O|||||||O6 Rubicon > ______ > /l ,[____], > l-L -OlllllllO- > ()_)-()_)--)_) > > The shortest distance between two points, > can be a lot more fun in a Jeep! > > |
Re: Winch mounting plate layout - Anyone have one?
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like. Greg "Kate" <svtkate@spam.filter> wrote in message news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. .. > What a happy day. > My Ex husband and his wife came to visit a few weeks ago. They took our > littlest Jeeper home for three weeks and he just brought him home last > night. > While they were here he told me that he had a Warn winch he would give me > for my Jeep. What a guy! > > Last night, the winch came with him. It's a > Warn M8000, complete. Only been used twice. > http://www.warn.com/truck/winches/src/M8000.shtml > > I've been looking at mounting plates and find that they are a bit pricey. > Since the hubster is a helluva fabricator I am hoping that someone has a > layout they would be willing to share so that we don't have to reinvent > the > wheel (so to speak) > > Thanks in advance :ŹD > > -- > Kate > 2O|||||||O6 Rubicon > ______ > /l ,[____], > l-L -OlllllllO- > ()_)-()_)--)_) > > The shortest distance between two points, > can be a lot more fun in a Jeep! > > |
Re: Winch mounting plate layout - Anyone have one?
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like. Greg "Kate" <svtkate@spam.filter> wrote in message news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. .. > What a happy day. > My Ex husband and his wife came to visit a few weeks ago. They took our > littlest Jeeper home for three weeks and he just brought him home last > night. > While they were here he told me that he had a Warn winch he would give me > for my Jeep. What a guy! > > Last night, the winch came with him. It's a > Warn M8000, complete. Only been used twice. > http://www.warn.com/truck/winches/src/M8000.shtml > > I've been looking at mounting plates and find that they are a bit pricey. > Since the hubster is a helluva fabricator I am hoping that someone has a > layout they would be willing to share so that we don't have to reinvent > the > wheel (so to speak) > > Thanks in advance :ŹD > > -- > Kate > 2O|||||||O6 Rubicon > ______ > /l ,[____], > l-L -OlllllllO- > ()_)-()_)--)_) > > The shortest distance between two points, > can be a lot more fun in a Jeep! > > |
Re: Winch mounting plate layout - Anyone have one?
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like. Greg "Kate" <svtkate@spam.filter> wrote in message news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. .. > What a happy day. > My Ex husband and his wife came to visit a few weeks ago. They took our > littlest Jeeper home for three weeks and he just brought him home last > night. > While they were here he told me that he had a Warn winch he would give me > for my Jeep. What a guy! > > Last night, the winch came with him. It's a > Warn M8000, complete. Only been used twice. > http://www.warn.com/truck/winches/src/M8000.shtml > > I've been looking at mounting plates and find that they are a bit pricey. > Since the hubster is a helluva fabricator I am hoping that someone has a > layout they would be willing to share so that we don't have to reinvent > the > wheel (so to speak) > > Thanks in advance :ŹD > > -- > Kate > 2O|||||||O6 Rubicon > ______ > /l ,[____], > l-L -OlllllllO- > ()_)-()_)--)_) > > The shortest distance between two points, > can be a lot more fun in a Jeep! > > |
Re: Winch mounting plate layout - Anyone have one?
Thanks Greg, every little bit will help!
"Greg" <greglc84@hotmail.com> wrote in message news:8SdHi.183690$fJ5.26636@pd7urf1no... I have a Warn 8274 mounted on what was a warn F150 mount that I just cut to fit my CJ, I could snap a pic and send it to you if you like. Greg "Kate" <svtkate@spam.filter> wrote in message news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. .. > What a happy day. > My Ex husband and his wife came to visit a few weeks ago. They took our > littlest Jeeper home for three weeks and he just brought him home last > night. > While they were here he told me that he had a Warn winch he would give me > for my Jeep. What a guy! > > Last night, the winch came with him. It's a > Warn M8000, complete. Only been used twice. > http://www.warn.com/truck/winches/src/M8000.shtml > > I've been looking at mounting plates and find that they are a bit pricey. > Since the hubster is a helluva fabricator I am hoping that someone has a > layout they would be willing to share so that we don't have to reinvent > the > wheel (so to speak) > > Thanks in advance :ŹD > > -- > Kate > 2O|||||||O6 Rubicon > ______ > /l ,[____], > l-L -OlllllllO- > ()_)-()_)--)_) > > The shortest distance between two points, > can be a lot more fun in a Jeep! > > |
Re: Winch mounting plate layout - Anyone have one?
Thanks Greg, every little bit will help!
"Greg" <greglc84@hotmail.com> wrote in message news:8SdHi.183690$fJ5.26636@pd7urf1no... I have a Warn 8274 mounted on what was a warn F150 mount that I just cut to fit my CJ, I could snap a pic and send it to you if you like. Greg "Kate" <svtkate@spam.filter> wrote in message news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. .. > What a happy day. > My Ex husband and his wife came to visit a few weeks ago. They took our > littlest Jeeper home for three weeks and he just brought him home last > night. > While they were here he told me that he had a Warn winch he would give me > for my Jeep. What a guy! > > Last night, the winch came with him. It's a > Warn M8000, complete. Only been used twice. > http://www.warn.com/truck/winches/src/M8000.shtml > > I've been looking at mounting plates and find that they are a bit pricey. > Since the hubster is a helluva fabricator I am hoping that someone has a > layout they would be willing to share so that we don't have to reinvent > the > wheel (so to speak) > > Thanks in advance :ŹD > > -- > Kate > 2O|||||||O6 Rubicon > ______ > /l ,[____], > l-L -OlllllllO- > ()_)-()_)--)_) > > The shortest distance between two points, > can be a lot more fun in a Jeep! > > |
Re: Winch mounting plate layout - Anyone have one?
Thanks Greg, every little bit will help!
"Greg" <greglc84@hotmail.com> wrote in message news:8SdHi.183690$fJ5.26636@pd7urf1no... I have a Warn 8274 mounted on what was a warn F150 mount that I just cut to fit my CJ, I could snap a pic and send it to you if you like. Greg "Kate" <svtkate@spam.filter> wrote in message news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. .. > What a happy day. > My Ex husband and his wife came to visit a few weeks ago. They took our > littlest Jeeper home for three weeks and he just brought him home last > night. > While they were here he told me that he had a Warn winch he would give me > for my Jeep. What a guy! > > Last night, the winch came with him. It's a > Warn M8000, complete. Only been used twice. > http://www.warn.com/truck/winches/src/M8000.shtml > > I've been looking at mounting plates and find that they are a bit pricey. > Since the hubster is a helluva fabricator I am hoping that someone has a > layout they would be willing to share so that we don't have to reinvent > the > wheel (so to speak) > > Thanks in advance :ŹD > > -- > Kate > 2O|||||||O6 Rubicon > ______ > /l ,[____], > l-L -OlllllllO- > ()_)-()_)--)_) > > The shortest distance between two points, > can be a lot more fun in a Jeep! > > |
| All times are GMT -4. The time now is 03:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands