Winch mounting plate layout - Anyone have one?
 

What a happy day.
My Ex husband and his wife came to visit a few weeks ago. They took our
littlest Jeeper home for three weeks and he just brought him home last
night.
While they were here he told me that he had a Warn winch he would give me
for my Jeep. What a guy!

Last night, the winch came with him. It's a
Warn M8000, complete. Only been used twice.
http://www.warn.com/truck/winches/src/M8000.shtml

I've been looking at mounting plates and find that they are a bit pricey.
Since the hubster is a helluva fabricator I am hoping that someone has a
layout they would be willing to share so that we don't have to reinvent the
wheel (so to speak)

Thanks in advance :¬D

--
Kate
2O|||||||O6 Rubicon
______
/l ,[____],
l-L -OlllllllO-
()_)-()_)--)_)

The shortest distance between two points,
can be a lot more fun in a Jeep!

Re: Winch mounting plate layout - Anyone have one?
 

Kate,

If you go to a 4x4 shop and look at one, you'll understand. It sits on
top of the frame rails on front of the grille, and bolts down to the frame.
Center the winch on the place, mark the winche's holes, and drill. Bolt and
be happy.

Carl


"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Kate,

If you go to a 4x4 shop and look at one, you'll understand. It sits on
top of the frame rails on front of the grille, and bolts down to the frame.
Center the winch on the place, mark the winche's holes, and drill. Bolt and
be happy.

Carl


"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Kate,

If you go to a 4x4 shop and look at one, you'll understand. It sits on
top of the frame rails on front of the grille, and bolts down to the frame.
Center the winch on the place, mark the winche's holes, and drill. Bolt and
be happy.

Carl


"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Kate,

If you go to a 4x4 shop and look at one, you'll understand. It sits on
top of the frame rails on front of the grille, and bolts down to the frame.
Center the winch on the place, mark the winche's holes, and drill. Bolt and
be happy.

Carl


"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Thanks Carl.
I'll go in to town tomorrow and see what I can find.
Not much in the area for 4x4 shops, and the ONE that we have carries very
little in stock.

Kate

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
Kate,

If you go to a 4x4 shop and look at one, you'll understand. It sits on
top of the frame rails on front of the grille, and bolts down to the frame.
Center the winch on the place, mark the winche's holes, and drill. Bolt and
be happy.

Carl


"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Thanks Carl.
I'll go in to town tomorrow and see what I can find.
Not much in the area for 4x4 shops, and the ONE that we have carries very
little in stock.

Kate

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
Kate,

If you go to a 4x4 shop and look at one, you'll understand. It sits on
top of the frame rails on front of the grille, and bolts down to the frame.
Center the winch on the place, mark the winche's holes, and drill. Bolt and
be happy.

Carl


"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Thanks Carl.
I'll go in to town tomorrow and see what I can find.
Not much in the area for 4x4 shops, and the ONE that we have carries very
little in stock.

Kate

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
Kate,

If you go to a 4x4 shop and look at one, you'll understand. It sits on
top of the frame rails on front of the grille, and bolts down to the frame.
Center the winch on the place, mark the winche's holes, and drill. Bolt and
be happy.

Carl


"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Thanks Carl.
I'll go in to town tomorrow and see what I can find.
Not much in the area for 4x4 shops, and the ONE that we have carries very
little in stock.

Kate

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
Kate,

If you go to a 4x4 shop and look at one, you'll understand. It sits on
top of the frame rails on front of the grille, and bolts down to the frame.
Center the winch on the place, mark the winche's holes, and drill. Bolt and
be happy.

Carl


"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

I will try to find you a picture. The one I bought was 3/16" steel from
warn.


"Kate" <svtkate@spam.filter> wrote in message
news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. ..
> Thanks Carl.
> I'll go in to town tomorrow and see what I can find.
> Not much in the area for 4x4 shops, and the ONE that we have carries very
> little in stock.
>
> Kate
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
> Kate,
>
> If you go to a 4x4 shop and look at one, you'll understand. It sits on
> top of the frame rails on front of the grille, and bolts down to the
> frame.
> Center the winch on the place, mark the winche's holes, and drill. Bolt
> and
> be happy.
>
> Carl
>
>
> "Kate" <svtkate@spam.filter> wrote in message
> news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
>> What a happy day.
>> My Ex husband and his wife came to visit a few weeks ago. They took our
>> littlest Jeeper home for three weeks and he just brought him home last
>> night.
>> While they were here he told me that he had a Warn winch he would give me
>> for my Jeep. What a guy!
>>
>> Last night, the winch came with him. It's a
>> Warn M8000, complete. Only been used twice.
>> http://www.warn.com/truck/winches/src/M8000.shtml
>>
>> I've been looking at mounting plates and find that they are a bit pricey.
>> Since the hubster is a helluva fabricator I am hoping that someone has a
>> layout they would be willing to share so that we don't have to reinvent
>> the
>> wheel (so to speak)
>>
>> Thanks in advance :¬D
>>
>> --
>> Kate
>> 2O|||||||O6 Rubicon
>> ______
>> /l ,[____],
>> l-L -OlllllllO-
>> ()_)-()_)--)_)
>>
>> The shortest distance between two points,
>> can be a lot more fun in a Jeep!
>>
>>
>
>
>

Re: Winch mounting plate layout - Anyone have one?
 

I will try to find you a picture. The one I bought was 3/16" steel from
warn.


"Kate" <svtkate@spam.filter> wrote in message
news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. ..
> Thanks Carl.
> I'll go in to town tomorrow and see what I can find.
> Not much in the area for 4x4 shops, and the ONE that we have carries very
> little in stock.
>
> Kate
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
> Kate,
>
> If you go to a 4x4 shop and look at one, you'll understand. It sits on
> top of the frame rails on front of the grille, and bolts down to the
> frame.
> Center the winch on the place, mark the winche's holes, and drill. Bolt
> and
> be happy.
>
> Carl
>
>
> "Kate" <svtkate@spam.filter> wrote in message
> news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
>> What a happy day.
>> My Ex husband and his wife came to visit a few weeks ago. They took our
>> littlest Jeeper home for three weeks and he just brought him home last
>> night.
>> While they were here he told me that he had a Warn winch he would give me
>> for my Jeep. What a guy!
>>
>> Last night, the winch came with him. It's a
>> Warn M8000, complete. Only been used twice.
>> http://www.warn.com/truck/winches/src/M8000.shtml
>>
>> I've been looking at mounting plates and find that they are a bit pricey.
>> Since the hubster is a helluva fabricator I am hoping that someone has a
>> layout they would be willing to share so that we don't have to reinvent
>> the
>> wheel (so to speak)
>>
>> Thanks in advance :¬D
>>
>> --
>> Kate
>> 2O|||||||O6 Rubicon
>> ______
>> /l ,[____],
>> l-L -OlllllllO-
>> ()_)-()_)--)_)
>>
>> The shortest distance between two points,
>> can be a lot more fun in a Jeep!
>>
>>
>
>
>

Re: Winch mounting plate layout - Anyone have one?
 

I will try to find you a picture. The one I bought was 3/16" steel from
warn.


"Kate" <svtkate@spam.filter> wrote in message
news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. ..
> Thanks Carl.
> I'll go in to town tomorrow and see what I can find.
> Not much in the area for 4x4 shops, and the ONE that we have carries very
> little in stock.
>
> Kate
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
> Kate,
>
> If you go to a 4x4 shop and look at one, you'll understand. It sits on
> top of the frame rails on front of the grille, and bolts down to the
> frame.
> Center the winch on the place, mark the winche's holes, and drill. Bolt
> and
> be happy.
>
> Carl
>
>
> "Kate" <svtkate@spam.filter> wrote in message
> news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
>> What a happy day.
>> My Ex husband and his wife came to visit a few weeks ago. They took our
>> littlest Jeeper home for three weeks and he just brought him home last
>> night.
>> While they were here he told me that he had a Warn winch he would give me
>> for my Jeep. What a guy!
>>
>> Last night, the winch came with him. It's a
>> Warn M8000, complete. Only been used twice.
>> http://www.warn.com/truck/winches/src/M8000.shtml
>>
>> I've been looking at mounting plates and find that they are a bit pricey.
>> Since the hubster is a helluva fabricator I am hoping that someone has a
>> layout they would be willing to share so that we don't have to reinvent
>> the
>> wheel (so to speak)
>>
>> Thanks in advance :¬D
>>
>> --
>> Kate
>> 2O|||||||O6 Rubicon
>> ______
>> /l ,[____],
>> l-L -OlllllllO-
>> ()_)-()_)--)_)
>>
>> The shortest distance between two points,
>> can be a lot more fun in a Jeep!
>>
>>
>
>
>

Re: Winch mounting plate layout - Anyone have one?
 

I will try to find you a picture. The one I bought was 3/16" steel from
warn.


"Kate" <svtkate@spam.filter> wrote in message
news:GXcHi.60902$mp6.50721@bignews9.bellsouth.net. ..
> Thanks Carl.
> I'll go in to town tomorrow and see what I can find.
> Not much in the area for 4x4 shops, and the ONE that we have carries very
> little in stock.
>
> Kate
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:FN-dnZM3K-UMyXDbnZ2dnUVZ_qOknZ2d@comcast.com...
> Kate,
>
> If you go to a 4x4 shop and look at one, you'll understand. It sits on
> top of the frame rails on front of the grille, and bolts down to the
> frame.
> Center the winch on the place, mark the winche's holes, and drill. Bolt
> and
> be happy.
>
> Carl
>
>
> "Kate" <svtkate@spam.filter> wrote in message
> news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
>> What a happy day.
>> My Ex husband and his wife came to visit a few weeks ago. They took our
>> littlest Jeeper home for three weeks and he just brought him home last
>> night.
>> While they were here he told me that he had a Warn winch he would give me
>> for my Jeep. What a guy!
>>
>> Last night, the winch came with him. It's a
>> Warn M8000, complete. Only been used twice.
>> http://www.warn.com/truck/winches/src/M8000.shtml
>>
>> I've been looking at mounting plates and find that they are a bit pricey.
>> Since the hubster is a helluva fabricator I am hoping that someone has a
>> layout they would be willing to share so that we don't have to reinvent
>> the
>> wheel (so to speak)
>>
>> Thanks in advance :¬D
>>
>> --
>> Kate
>> 2O|||||||O6 Rubicon
>> ______
>> /l ,[____],
>> l-L -OlllllllO-
>> ()_)-()_)--)_)
>>
>> The shortest distance between two points,
>> can be a lot more fun in a Jeep!
>>
>>
>
>
>

Re: Winch mounting plate layout - Anyone have one?
 

I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Thanks Greg, every little bit will help!

"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Thanks Greg, every little bit will help!

"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Thanks Greg, every little bit will help!

"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Thanks Greg, every little bit will help!

"Greg" <greglc84@hotmail.com> wrote in message
news:8SdHi.183690$fJ5.26636@pd7urf1no...
I have a Warn 8274 mounted on what was a warn F150 mount that I just cut
to fit my CJ, I could snap a pic and send it to you if you like.
Greg

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Kate wrote:
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :¬D
>

One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.

Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: Winch mounting plate layout - Anyone have one?
 

Kate wrote:
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :¬D
>

One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.

Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: Winch mounting plate layout - Anyone have one?
 

Kate wrote:
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :¬D
>

One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.

Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: Winch mounting plate layout - Anyone have one?
 

Kate wrote:
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent the
> wheel (so to speak)
>
> Thanks in advance :¬D
>

One thing on mine is the mounting bolts fit into a stock frame threaded
hole and one passed through the frame with a tube and washer setup so it
couldn't crush it.

Mine is a CJ7 though so the design wouldn't likely be the same, but
then... I could also snap off a photo and email it if it would help.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: Winch mounting plate layout - Anyone have one?
 

Way cool. congrats!
-jenn



On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:

>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :¬D

Re: Winch mounting plate layout - Anyone have one?
 

Way cool. congrats!
-jenn



On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:

>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :¬D

Re: Winch mounting plate layout - Anyone have one?
 

Way cool. congrats!
-jenn



On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:

>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :¬D

Re: Winch mounting plate layout - Anyone have one?
 

Way cool. congrats!
-jenn



On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:

>>What a happy day.
>>My Ex husband and his wife came to visit a few weeks ago. They took our
>>littlest Jeeper home for three weeks and he just brought him home last
>>night.
>>While they were here he told me that he had a Warn winch he would give me
>>for my Jeep. What a guy!
>>
>>Last night, the winch came with him. It's a
>>Warn M8000, complete. Only been used twice.
>>http://www.warn.com/truck/winches/src/M8000.shtml
>>
>>I've been looking at mounting plates and find that they are a bit pricey.
>>Since the hubster is a helluva fabricator I am hoping that someone has a
>>layout they would be willing to share so that we don't have to reinvent the
>>wheel (so to speak)
>>
>>Thanks in advance :¬D

Re: Winch mounting plate layout - Anyone have one?
 

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
I made my own and wish I had spent the bucks for the OEM. They'll fit right
and be rated properly.

Re: Winch mounting plate layout - Anyone have one?
 

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
I made my own and wish I had spent the bucks for the OEM. They'll fit right
and be rated properly.

Re: Winch mounting plate layout - Anyone have one?
 

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
I made my own and wish I had spent the bucks for the OEM. They'll fit right
and be rated properly.

Re: Winch mounting plate layout - Anyone have one?
 

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>
I made my own and wish I had spent the bucks for the OEM. They'll fit right
and be rated properly.

Re: Winch mounting plate layout - Anyone have one?
 

Here are a couple links for you:
http://www.offroaders.com/tech/winches/WarnX8000i.htm
http://www.atozfabrication.com/catal...ount-p-29.html

Chris

> On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>
>>> What a happy day.
>>> My Ex husband and his wife came to visit a few weeks ago. They took our
>>> littlest Jeeper home for three weeks and he just brought him home last
>>> night.
>>> While they were here he told me that he had a Warn winch he would give me
>>> for my Jeep. What a guy!
>>>
>>> Last night, the winch came with him. It's a
>>> Warn M8000, complete. Only been used twice.
>>> http://www.warn.com/truck/winches/src/M8000.shtml
>>>
>>> I've been looking at mounting plates and find that they are a bit pricey.
>>> Since the hubster is a helluva fabricator I am hoping that someone has a
>>> layout they would be willing to share so that we don't have to reinvent the
>>> wheel (so to speak)
>>>
>>> Thanks in advance :¬D

Re: Winch mounting plate layout - Anyone have one?
 

Here are a couple links for you:
http://www.offroaders.com/tech/winches/WarnX8000i.htm
http://www.atozfabrication.com/catal...ount-p-29.html

Chris

> On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>
>>> What a happy day.
>>> My Ex husband and his wife came to visit a few weeks ago. They took our
>>> littlest Jeeper home for three weeks and he just brought him home last
>>> night.
>>> While they were here he told me that he had a Warn winch he would give me
>>> for my Jeep. What a guy!
>>>
>>> Last night, the winch came with him. It's a
>>> Warn M8000, complete. Only been used twice.
>>> http://www.warn.com/truck/winches/src/M8000.shtml
>>>
>>> I've been looking at mounting plates and find that they are a bit pricey.
>>> Since the hubster is a helluva fabricator I am hoping that someone has a
>>> layout they would be willing to share so that we don't have to reinvent the
>>> wheel (so to speak)
>>>
>>> Thanks in advance :¬D

Re: Winch mounting plate layout - Anyone have one?
 

Here are a couple links for you:
http://www.offroaders.com/tech/winches/WarnX8000i.htm
http://www.atozfabrication.com/catal...ount-p-29.html

Chris

> On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>
>>> What a happy day.
>>> My Ex husband and his wife came to visit a few weeks ago. They took our
>>> littlest Jeeper home for three weeks and he just brought him home last
>>> night.
>>> While they were here he told me that he had a Warn winch he would give me
>>> for my Jeep. What a guy!
>>>
>>> Last night, the winch came with him. It's a
>>> Warn M8000, complete. Only been used twice.
>>> http://www.warn.com/truck/winches/src/M8000.shtml
>>>
>>> I've been looking at mounting plates and find that they are a bit pricey.
>>> Since the hubster is a helluva fabricator I am hoping that someone has a
>>> layout they would be willing to share so that we don't have to reinvent the
>>> wheel (so to speak)
>>>
>>> Thanks in advance :¬D

Re: Winch mounting plate layout - Anyone have one?
 

Here are a couple links for you:
http://www.offroaders.com/tech/winches/WarnX8000i.htm
http://www.atozfabrication.com/catal...ount-p-29.html

Chris

> On Sun, 16 Sep 2007 10:17:53 -0500, "Kate" <svtkate@spam.filter> wrote:
>
>>> What a happy day.
>>> My Ex husband and his wife came to visit a few weeks ago. They took our
>>> littlest Jeeper home for three weeks and he just brought him home last
>>> night.
>>> While they were here he told me that he had a Warn winch he would give me
>>> for my Jeep. What a guy!
>>>
>>> Last night, the winch came with him. It's a
>>> Warn M8000, complete. Only been used twice.
>>> http://www.warn.com/truck/winches/src/M8000.shtml
>>>
>>> I've been looking at mounting plates and find that they are a bit pricey.
>>> Since the hubster is a helluva fabricator I am hoping that someone has a
>>> layout they would be willing to share so that we don't have to reinvent the
>>> wheel (so to speak)
>>>
>>> Thanks in advance :¬D

Re: Winch mounting plate layout - Anyone have one?
 

Kate,

The proper plate is only $100..

Carl

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Kate,

The proper plate is only $100..

Carl

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>

Re: Winch mounting plate layout - Anyone have one?
 

Kate,

The proper plate is only $100..

Carl

"Kate" <svtkate@spam.filter> wrote in message
news:IObHi.47225$7e6.44330@bignews4.bellsouth.net. ..
> What a happy day.
> My Ex husband and his wife came to visit a few weeks ago. They took our
> littlest Jeeper home for three weeks and he just brought him home last
> night.
> While they were here he told me that he had a Warn winch he would give me
> for my Jeep. What a guy!
>
> Last night, the winch came with him. It's a
> Warn M8000, complete. Only been used twice.
> http://www.warn.com/truck/winches/src/M8000.shtml
>
> I've been looking at mounting plates and find that they are a bit pricey.
> Since the hubster is a helluva fabricator I am hoping that someone has a
> layout they would be willing to share so that we don't have to reinvent
> the
> wheel (so to speak)
>
> Thanks in advance :¬D
>
> --
> Kate
> 2O|||||||O6 Rubicon
> ______
> /l ,[____],
> l-L -OlllllllO-
> ()_)-()_)--)_)
>
> The shortest distance between two points,
> can be a lot more fun in a Jeep!
>
>