Willys F-head choke question
10-01-2003, 09:09 AM
#1
Guest
Posts: n/a
****** F-head choke question
How are you supposed to hook up the choke to one of these? My 49
pickup has one of these F-heads. I think that it may not be the
origonal motor but am not sure. Also, the carb has been changed
numerous times.
For all the carbs that I have had on her it is always the same story,
to *CLOSE* the choke I push in the button, to *OPEN* the choke I pull
the button out. Is there something wrong with the replacement carb,
or was this set up wierd from the get-go?
If anyone knows if the F-head was standard in the <51 series (flat
nose) that would be appreciated. If you have one of these I would
love to see a picture.
Thanks in advance,
John Welch
>/<
pickup has one of these F-heads. I think that it may not be the
origonal motor but am not sure. Also, the carb has been changed
numerous times.
For all the carbs that I have had on her it is always the same story,
to *CLOSE* the choke I push in the button, to *OPEN* the choke I pull
the button out. Is there something wrong with the replacement carb,
or was this set up wierd from the get-go?
If anyone knows if the F-head was standard in the <51 series (flat
nose) that would be appreciated. If you have one of these I would
love to see a picture.
Thanks in advance,
John Welch
>/<
10-01-2003, 10:59 AM
#2
Guest
Posts: n/a
Re: ****** F-head choke question
Most choke plate rods have a slotted end that the lever screws onto. If
the lever is on the top, then the choke could be a pull off type. If
you flip the lever to the bottom, then the choke will work opposite.
I can do either easily on my Carter BBD. I have it set as a pull on,
but easily could make it a pull off.
I can also change the pull by running the cable either to the front or
rear side of the carb rather than flipping the lever.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
John Welch wrote:
>
> How are you supposed to hook up the choke to one of these? My 49
> pickup has one of these F-heads. I think that it may not be the
> origonal motor but am not sure. Also, the carb has been changed
> numerous times.
>
> For all the carbs that I have had on her it is always the same story,
> to *CLOSE* the choke I push in the button, to *OPEN* the choke I pull
> the button out. Is there something wrong with the replacement carb,
> or was this set up wierd from the get-go?
>
> If anyone knows if the F-head was standard in the <51 series (flat
> nose) that would be appreciated. If you have one of these I would
> love to see a picture.
>
> Thanks in advance,
> John Welch
> >/<
the lever is on the top, then the choke could be a pull off type. If
you flip the lever to the bottom, then the choke will work opposite.
I can do either easily on my Carter BBD. I have it set as a pull on,
but easily could make it a pull off.
I can also change the pull by running the cable either to the front or
rear side of the carb rather than flipping the lever.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
John Welch wrote:
>
> How are you supposed to hook up the choke to one of these? My 49
> pickup has one of these F-heads. I think that it may not be the
> origonal motor but am not sure. Also, the carb has been changed
> numerous times.
>
> For all the carbs that I have had on her it is always the same story,
> to *CLOSE* the choke I push in the button, to *OPEN* the choke I pull
> the button out. Is there something wrong with the replacement carb,
> or was this set up wierd from the get-go?
>
> If anyone knows if the F-head was standard in the <51 series (flat
> nose) that would be appreciated. If you have one of these I would
> love to see a picture.
>
> Thanks in advance,
> John Welch
> >/<
10-01-2003, 10:59 AM
#3
Guest
Posts: n/a
Re: ****** F-head choke question
Most choke plate rods have a slotted end that the lever screws onto. If
the lever is on the top, then the choke could be a pull off type. If
you flip the lever to the bottom, then the choke will work opposite.
I can do either easily on my Carter BBD. I have it set as a pull on,
but easily could make it a pull off.
I can also change the pull by running the cable either to the front or
rear side of the carb rather than flipping the lever.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
John Welch wrote:
>
> How are you supposed to hook up the choke to one of these? My 49
> pickup has one of these F-heads. I think that it may not be the
> origonal motor but am not sure. Also, the carb has been changed
> numerous times.
>
> For all the carbs that I have had on her it is always the same story,
> to *CLOSE* the choke I push in the button, to *OPEN* the choke I pull
> the button out. Is there something wrong with the replacement carb,
> or was this set up wierd from the get-go?
>
> If anyone knows if the F-head was standard in the <51 series (flat
> nose) that would be appreciated. If you have one of these I would
> love to see a picture.
>
> Thanks in advance,
> John Welch
> >/<
the lever is on the top, then the choke could be a pull off type. If
you flip the lever to the bottom, then the choke will work opposite.
I can do either easily on my Carter BBD. I have it set as a pull on,
but easily could make it a pull off.
I can also change the pull by running the cable either to the front or
rear side of the carb rather than flipping the lever.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
John Welch wrote:
>
> How are you supposed to hook up the choke to one of these? My 49
> pickup has one of these F-heads. I think that it may not be the
> origonal motor but am not sure. Also, the carb has been changed
> numerous times.
>
> For all the carbs that I have had on her it is always the same story,
> to *CLOSE* the choke I push in the button, to *OPEN* the choke I pull
> the button out. Is there something wrong with the replacement carb,
> or was this set up wierd from the get-go?
>
> If anyone knows if the F-head was standard in the <51 series (flat
> nose) that would be appreciated. If you have one of these I would
> love to see a picture.
>
> Thanks in advance,
> John Welch
> >/<
Thread
Thread Starter
Forum
Replies
Last Post
jamie
Jeep Mailing List
3
02-09-2004 01:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
