Where to tap off switched 12V in a WJ?
06-01-2004, 09:39 PM
#11
Guest
Posts: n/a
Re: Where to tap off switched 12V in a WJ?
Russ Panneton did pass the time by typing:
> On Mon, 31 May 2004 22:53:13 -0700, nunya <business@127.0.0.1> wrote:
>
>> On Tue, 01 Jun 2004 02:49:05 +0000, Russ Panneton wrote:
>>
>>> I'm looking for a wire to tap into on my 2004 JGC to get switched 12V for my
>>> radar detector. I looked under the drivers side dash but all the wires are
>>> loomed together so neatly that I can't get to any of them! Just sticking a
>>> wire under a fuse is a bit too tacky for me ;-) I thought my best bet was
>>> to just tap into the cigarette lighter wire -- does anyone know how to
>>> remove the interior trim piece(s) so that I can get to *that* wire??? I
>>> don't want to have any cords visible from my windshield mounted detector.
>>> Is one of the wires going into the inside rear view mirror switched 12V?
>>>
>>> Thanks for any help and/or pointers to other sources of info!
>> I hear tell of both switched and non-switched 12volt stubbed
>> behind gove box ......... standard.
>
> I'll check that out -- I hope it's true! Thanks for the lead :-)
I just use the ciggy ligher feed. More than enough for a radar detector.
You can use the real thin speaker cable to run power up top to avoid the
dangly cord give-away.
> On Mon, 31 May 2004 22:53:13 -0700, nunya <business@127.0.0.1> wrote:
>
>> On Tue, 01 Jun 2004 02:49:05 +0000, Russ Panneton wrote:
>>
>>> I'm looking for a wire to tap into on my 2004 JGC to get switched 12V for my
>>> radar detector. I looked under the drivers side dash but all the wires are
>>> loomed together so neatly that I can't get to any of them! Just sticking a
>>> wire under a fuse is a bit too tacky for me ;-) I thought my best bet was
>>> to just tap into the cigarette lighter wire -- does anyone know how to
>>> remove the interior trim piece(s) so that I can get to *that* wire??? I
>>> don't want to have any cords visible from my windshield mounted detector.
>>> Is one of the wires going into the inside rear view mirror switched 12V?
>>>
>>> Thanks for any help and/or pointers to other sources of info!
>> I hear tell of both switched and non-switched 12volt stubbed
>> behind gove box ......... standard.
>
> I'll check that out -- I hope it's true! Thanks for the lead :-)
I just use the ciggy ligher feed. More than enough for a radar detector.
You can use the real thin speaker cable to run power up top to avoid the
dangly cord give-away.
06-01-2004, 09:39 PM
#12
Guest
Posts: n/a
Re: Where to tap off switched 12V in a WJ?
Russ Panneton did pass the time by typing:
> On Mon, 31 May 2004 22:53:13 -0700, nunya <business@127.0.0.1> wrote:
>
>> On Tue, 01 Jun 2004 02:49:05 +0000, Russ Panneton wrote:
>>
>>> I'm looking for a wire to tap into on my 2004 JGC to get switched 12V for my
>>> radar detector. I looked under the drivers side dash but all the wires are
>>> loomed together so neatly that I can't get to any of them! Just sticking a
>>> wire under a fuse is a bit too tacky for me ;-) I thought my best bet was
>>> to just tap into the cigarette lighter wire -- does anyone know how to
>>> remove the interior trim piece(s) so that I can get to *that* wire??? I
>>> don't want to have any cords visible from my windshield mounted detector.
>>> Is one of the wires going into the inside rear view mirror switched 12V?
>>>
>>> Thanks for any help and/or pointers to other sources of info!
>> I hear tell of both switched and non-switched 12volt stubbed
>> behind gove box ......... standard.
>
> I'll check that out -- I hope it's true! Thanks for the lead :-)
I just use the ciggy ligher feed. More than enough for a radar detector.
You can use the real thin speaker cable to run power up top to avoid the
dangly cord give-away.
> On Mon, 31 May 2004 22:53:13 -0700, nunya <business@127.0.0.1> wrote:
>
>> On Tue, 01 Jun 2004 02:49:05 +0000, Russ Panneton wrote:
>>
>>> I'm looking for a wire to tap into on my 2004 JGC to get switched 12V for my
>>> radar detector. I looked under the drivers side dash but all the wires are
>>> loomed together so neatly that I can't get to any of them! Just sticking a
>>> wire under a fuse is a bit too tacky for me ;-) I thought my best bet was
>>> to just tap into the cigarette lighter wire -- does anyone know how to
>>> remove the interior trim piece(s) so that I can get to *that* wire??? I
>>> don't want to have any cords visible from my windshield mounted detector.
>>> Is one of the wires going into the inside rear view mirror switched 12V?
>>>
>>> Thanks for any help and/or pointers to other sources of info!
>> I hear tell of both switched and non-switched 12volt stubbed
>> behind gove box ......... standard.
>
> I'll check that out -- I hope it's true! Thanks for the lead :-)
I just use the ciggy ligher feed. More than enough for a radar detector.
You can use the real thin speaker cable to run power up top to avoid the
dangly cord give-away.
06-01-2004, 09:39 PM
#13
Guest
Posts: n/a
Re: Where to tap off switched 12V in a WJ?
Russ Panneton did pass the time by typing:
> On Mon, 31 May 2004 22:53:13 -0700, nunya <business@127.0.0.1> wrote:
>
>> On Tue, 01 Jun 2004 02:49:05 +0000, Russ Panneton wrote:
>>
>>> I'm looking for a wire to tap into on my 2004 JGC to get switched 12V for my
>>> radar detector. I looked under the drivers side dash but all the wires are
>>> loomed together so neatly that I can't get to any of them! Just sticking a
>>> wire under a fuse is a bit too tacky for me ;-) I thought my best bet was
>>> to just tap into the cigarette lighter wire -- does anyone know how to
>>> remove the interior trim piece(s) so that I can get to *that* wire??? I
>>> don't want to have any cords visible from my windshield mounted detector.
>>> Is one of the wires going into the inside rear view mirror switched 12V?
>>>
>>> Thanks for any help and/or pointers to other sources of info!
>> I hear tell of both switched and non-switched 12volt stubbed
>> behind gove box ......... standard.
>
> I'll check that out -- I hope it's true! Thanks for the lead :-)
I just use the ciggy ligher feed. More than enough for a radar detector.
You can use the real thin speaker cable to run power up top to avoid the
dangly cord give-away.
> On Mon, 31 May 2004 22:53:13 -0700, nunya <business@127.0.0.1> wrote:
>
>> On Tue, 01 Jun 2004 02:49:05 +0000, Russ Panneton wrote:
>>
>>> I'm looking for a wire to tap into on my 2004 JGC to get switched 12V for my
>>> radar detector. I looked under the drivers side dash but all the wires are
>>> loomed together so neatly that I can't get to any of them! Just sticking a
>>> wire under a fuse is a bit too tacky for me ;-) I thought my best bet was
>>> to just tap into the cigarette lighter wire -- does anyone know how to
>>> remove the interior trim piece(s) so that I can get to *that* wire??? I
>>> don't want to have any cords visible from my windshield mounted detector.
>>> Is one of the wires going into the inside rear view mirror switched 12V?
>>>
>>> Thanks for any help and/or pointers to other sources of info!
>> I hear tell of both switched and non-switched 12volt stubbed
>> behind gove box ......... standard.
>
> I'll check that out -- I hope it's true! Thanks for the lead :-)
I just use the ciggy ligher feed. More than enough for a radar detector.
You can use the real thin speaker cable to run power up top to avoid the
dangly cord give-away.
06-01-2004, 09:51 PM
#14
Guest
Posts: n/a
Re: Where to tap off switched 12V in a WJ?
That's one way to keep your toy.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> I just use the ciggy ligher feed. More than enough for a radar detector.
> You can use the real thin speaker cable to run power up top to avoid the
> dangly cord give-away.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> I just use the ciggy ligher feed. More than enough for a radar detector.
> You can use the real thin speaker cable to run power up top to avoid the
> dangly cord give-away.
06-01-2004, 09:51 PM
#15
Guest
Posts: n/a
Re: Where to tap off switched 12V in a WJ?
That's one way to keep your toy.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> I just use the ciggy ligher feed. More than enough for a radar detector.
> You can use the real thin speaker cable to run power up top to avoid the
> dangly cord give-away.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> I just use the ciggy ligher feed. More than enough for a radar detector.
> You can use the real thin speaker cable to run power up top to avoid the
> dangly cord give-away.
06-01-2004, 09:51 PM
#16
Guest
Posts: n/a
Re: Where to tap off switched 12V in a WJ?
That's one way to keep your toy.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> I just use the ciggy ligher feed. More than enough for a radar detector.
> You can use the real thin speaker cable to run power up top to avoid the
> dangly cord give-away.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> I just use the ciggy ligher feed. More than enough for a radar detector.
> You can use the real thin speaker cable to run power up top to avoid the
> dangly cord give-away.
06-01-2004, 09:51 PM
#17
Guest
Posts: n/a
Re: Where to tap off switched 12V in a WJ?
That's one way to keep your toy.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> I just use the ciggy ligher feed. More than enough for a radar detector.
> You can use the real thin speaker cable to run power up top to avoid the
> dangly cord give-away.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> I just use the ciggy ligher feed. More than enough for a radar detector.
> You can use the real thin speaker cable to run power up top to avoid the
> dangly cord give-away.
06-02-2004, 11:18 PM
#18
Guest
Posts: n/a
Re: Where to tap off switched 12V in a WJ?
On Tue, 1 Jun 2004 20:39:25 -0500, "DougW" <post.replies@invalid.address>
wrote:
>
>I just use the ciggy ligher feed. More than enough for a radar detector.
>You can use the real thin speaker cable to run power up top to avoid the
>dangly cord give-away.
>
On my 2004, all the wires are tucked in so well I can't find a way to get to
any of them!
--
Russ Panneton pannetron@hotmail.com
Nederland, CO "Too bad ignorance isn't painful"
wrote:
>
>I just use the ciggy ligher feed. More than enough for a radar detector.
>You can use the real thin speaker cable to run power up top to avoid the
>dangly cord give-away.
>
On my 2004, all the wires are tucked in so well I can't find a way to get to
any of them!
--
Russ Panneton pannetron@hotmail.com
Nederland, CO "Too bad ignorance isn't painful"
06-02-2004, 11:18 PM
#19
Guest
Posts: n/a
Re: Where to tap off switched 12V in a WJ?
On Tue, 1 Jun 2004 20:39:25 -0500, "DougW" <post.replies@invalid.address>
wrote:
>
>I just use the ciggy ligher feed. More than enough for a radar detector.
>You can use the real thin speaker cable to run power up top to avoid the
>dangly cord give-away.
>
On my 2004, all the wires are tucked in so well I can't find a way to get to
any of them!
--
Russ Panneton pannetron@hotmail.com
Nederland, CO "Too bad ignorance isn't painful"
wrote:
>
>I just use the ciggy ligher feed. More than enough for a radar detector.
>You can use the real thin speaker cable to run power up top to avoid the
>dangly cord give-away.
>
On my 2004, all the wires are tucked in so well I can't find a way to get to
any of them!
--
Russ Panneton pannetron@hotmail.com
Nederland, CO "Too bad ignorance isn't painful"
06-02-2004, 11:18 PM
#20
Guest
Posts: n/a
Re: Where to tap off switched 12V in a WJ?
On Tue, 1 Jun 2004 20:39:25 -0500, "DougW" <post.replies@invalid.address>
wrote:
>
>I just use the ciggy ligher feed. More than enough for a radar detector.
>You can use the real thin speaker cable to run power up top to avoid the
>dangly cord give-away.
>
On my 2004, all the wires are tucked in so well I can't find a way to get to
any of them!
--
Russ Panneton pannetron@hotmail.com
Nederland, CO "Too bad ignorance isn't painful"
wrote:
>
>I just use the ciggy ligher feed. More than enough for a radar detector.
>You can use the real thin speaker cable to run power up top to avoid the
>dangly cord give-away.
>
On my 2004, all the wires are tucked in so well I can't find a way to get to
any of them!
--
Russ Panneton pannetron@hotmail.com
Nederland, CO "Too bad ignorance isn't painful"
