What is supposed to be in the box?
Guest
Posts: n/a
Re: What is supposed to be in the box?
For all except Kate, who must have replaced a lot of these to be able to do
it in her sleep, I got a reply from OME:
It appears you have all the required components. We do reuse the factory
hardware on one side as it is very high quality and our damper is engineered
to work with it. Use the supplied tapered hardware for the opposite side.
As for a boot, all OME dampers and shocks use the steel sleeve over the
shaft to protect it. It is MUCH more durable than a boot and does not trap
dirt and grime as a boot will.
Best Regards,
Marc Bowers
Tech Supervisor
Air Locker, Inc.
425-264-1391
720 SW 34th St.
Renton, WA 98055
Marc@arbusa.com
it in her sleep, I got a reply from OME:
It appears you have all the required components. We do reuse the factory
hardware on one side as it is very high quality and our damper is engineered
to work with it. Use the supplied tapered hardware for the opposite side.
As for a boot, all OME dampers and shocks use the steel sleeve over the
shaft to protect it. It is MUCH more durable than a boot and does not trap
dirt and grime as a boot will.
Best Regards,
Marc Bowers
Tech Supervisor
Air Locker, Inc.
425-264-1391
720 SW 34th St.
Renton, WA 98055
Marc@arbusa.com
Guest
Posts: n/a
Re: What is supposed to be in the box?
For all except Kate, who must have replaced a lot of these to be able to do
it in her sleep, I got a reply from OME:
It appears you have all the required components. We do reuse the factory
hardware on one side as it is very high quality and our damper is engineered
to work with it. Use the supplied tapered hardware for the opposite side.
As for a boot, all OME dampers and shocks use the steel sleeve over the
shaft to protect it. It is MUCH more durable than a boot and does not trap
dirt and grime as a boot will.
Best Regards,
Marc Bowers
Tech Supervisor
Air Locker, Inc.
425-264-1391
720 SW 34th St.
Renton, WA 98055
Marc@arbusa.com
it in her sleep, I got a reply from OME:
It appears you have all the required components. We do reuse the factory
hardware on one side as it is very high quality and our damper is engineered
to work with it. Use the supplied tapered hardware for the opposite side.
As for a boot, all OME dampers and shocks use the steel sleeve over the
shaft to protect it. It is MUCH more durable than a boot and does not trap
dirt and grime as a boot will.
Best Regards,
Marc Bowers
Tech Supervisor
Air Locker, Inc.
425-264-1391
720 SW 34th St.
Renton, WA 98055
Marc@arbusa.com
Thread
Thread Starter
Forum
Replies
Last Post
Re: Hey Llewellyn "Where are all those Harley pictures you where supposed to post last month, LIAR!"
=?iso-8859-1?q?=A7qu=40r3_Wh33=A3s?=
Jeep Mailing List
9
Dec 10, 2006 11:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)