Were can I find parts
#2
Guest
Posts: n/a
Re: Were can I find parts
abomb69 wrote:
> I am wondering places on the net I can find parts for a 93 Cherokee,
> the local yards dont even have parts of them.....evidently there are
> too many still on the roads.. I am needing the panels underneath the
> doors on both sides.
"Rocker panel"
http://www.chryslerpartsdirect.com/
Factory part is $85 per side. Depending on what's rotted out.
The reinforcement is about 100$ per side.
possibly http://www.rustrepair.com/Rocker_panel.htm
I'd hit up local body shops and find out what they can get
them for and what vendors they like.
Remember that unless you luck out, even factory will require
some cutting/welding/bending/malleting with large hammers/ :)
--
DougW
> I am wondering places on the net I can find parts for a 93 Cherokee,
> the local yards dont even have parts of them.....evidently there are
> too many still on the roads.. I am needing the panels underneath the
> doors on both sides.
"Rocker panel"
http://www.chryslerpartsdirect.com/
Factory part is $85 per side. Depending on what's rotted out.
The reinforcement is about 100$ per side.
possibly http://www.rustrepair.com/Rocker_panel.htm
I'd hit up local body shops and find out what they can get
them for and what vendors they like.
Remember that unless you luck out, even factory will require
some cutting/welding/bending/malleting with large hammers/ :)
--
DougW
#3
Guest
Posts: n/a
Re: Were can I find parts
abomb69 wrote:
> I am wondering places on the net I can find parts for a 93 Cherokee,
> the local yards dont even have parts of them.....evidently there are
> too many still on the roads.. I am needing the panels underneath the
> doors on both sides.
"Rocker panel"
http://www.chryslerpartsdirect.com/
Factory part is $85 per side. Depending on what's rotted out.
The reinforcement is about 100$ per side.
possibly http://www.rustrepair.com/Rocker_panel.htm
I'd hit up local body shops and find out what they can get
them for and what vendors they like.
Remember that unless you luck out, even factory will require
some cutting/welding/bending/malleting with large hammers/ :)
--
DougW
> I am wondering places on the net I can find parts for a 93 Cherokee,
> the local yards dont even have parts of them.....evidently there are
> too many still on the roads.. I am needing the panels underneath the
> doors on both sides.
"Rocker panel"
http://www.chryslerpartsdirect.com/
Factory part is $85 per side. Depending on what's rotted out.
The reinforcement is about 100$ per side.
possibly http://www.rustrepair.com/Rocker_panel.htm
I'd hit up local body shops and find out what they can get
them for and what vendors they like.
Remember that unless you luck out, even factory will require
some cutting/welding/bending/malleting with large hammers/ :)
--
DougW
#4
Guest
Posts: n/a
Re: Were can I find parts
abomb69 wrote:
> I am wondering places on the net I can find parts for a 93 Cherokee,
> the local yards dont even have parts of them.....evidently there are
> too many still on the roads.. I am needing the panels underneath the
> doors on both sides.
"Rocker panel"
http://www.chryslerpartsdirect.com/
Factory part is $85 per side. Depending on what's rotted out.
The reinforcement is about 100$ per side.
possibly http://www.rustrepair.com/Rocker_panel.htm
I'd hit up local body shops and find out what they can get
them for and what vendors they like.
Remember that unless you luck out, even factory will require
some cutting/welding/bending/malleting with large hammers/ :)
--
DougW
> I am wondering places on the net I can find parts for a 93 Cherokee,
> the local yards dont even have parts of them.....evidently there are
> too many still on the roads.. I am needing the panels underneath the
> doors on both sides.
"Rocker panel"
http://www.chryslerpartsdirect.com/
Factory part is $85 per side. Depending on what's rotted out.
The reinforcement is about 100$ per side.
possibly http://www.rustrepair.com/Rocker_panel.htm
I'd hit up local body shops and find out what they can get
them for and what vendors they like.
Remember that unless you luck out, even factory will require
some cutting/welding/bending/malleting with large hammers/ :)
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
S_A_W
Standard Auto Wreckers
0
01-21-2014 01:22 PM
S_A_W
Standard Auto Wreckers
0
08-29-2013 10:33 AM
S_A_W
Standard Auto Wreckers
0
07-02-2013 11:26 AM
S_A_W
Standard Auto Wreckers
0
08-24-2012 12:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)