abomb69

I am wondering places on the net I can find parts for a 93 Cherokee, the
local yards dont even have parts of them.....evidently there are too many
still on the roads.. I am needing the panels underneath the doors on both
sides.

DougW

abomb69 wrote:
> I am wondering places on the net I can find parts for a 93 Cherokee,
> the local yards dont even have parts of them.....evidently there are
> too many still on the roads.. I am needing the panels underneath the
> doors on both sides.

"Rocker panel"

http://www.chryslerpartsdirect.com/
Factory part is $85 per side. Depending on what's rotted out.
The reinforcement is about 100$ per side.

possibly http://www.rustrepair.com/Rocker_panel.htm

I'd hit up local body shops and find out what they can get
them for and what vendors they like.

Remember that unless you luck out, even factory will require
some cutting/welding/bending/malleting with large hammers/ :)

--
DougW

DougW

abomb69 wrote:
> I am wondering places on the net I can find parts for a 93 Cherokee,
> the local yards dont even have parts of them.....evidently there are
> too many still on the roads.. I am needing the panels underneath the
> doors on both sides.

"Rocker panel"

http://www.chryslerpartsdirect.com/
Factory part is $85 per side. Depending on what's rotted out.
The reinforcement is about 100$ per side.

possibly http://www.rustrepair.com/Rocker_panel.htm

I'd hit up local body shops and find out what they can get
them for and what vendors they like.

Remember that unless you luck out, even factory will require
some cutting/welding/bending/malleting with large hammers/ :)

--
DougW

DougW

abomb69 wrote:
> I am wondering places on the net I can find parts for a 93 Cherokee,
> the local yards dont even have parts of them.....evidently there are
> too many still on the roads.. I am needing the panels underneath the
> doors on both sides.

"Rocker panel"

http://www.chryslerpartsdirect.com/
Factory part is $85 per side. Depending on what's rotted out.
The reinforcement is about 100$ per side.

possibly http://www.rustrepair.com/Rocker_panel.htm

I'd hit up local body shops and find out what they can get
them for and what vendors they like.

Remember that unless you luck out, even factory will require
some cutting/welding/bending/malleting with large hammers/ :)

--
DougW