Ways around emssion laws???
05-06-2005, 02:47 PM
#11
Guest
Posts: n/a
Re: Ways around emssion laws???
In the Peoples Republic of California, you will be REQUIRED to bring the
older engine up to the standards for the year of your vehicle.
Basically, you have to use the emissions system for the newer of the engine
or the make of the vehicle. If you put in a motor from a 2000 into your
1995, then you would have to carry the smog stuff over to retain the 2000
emission system. If you put in an older motor, then you have to bring it up
to the smog standards in effect for 1995.
This is only true, as I understand the rules, if you plan to use the vehicle
on the highway. If you are making a machine strictly for offroading, then
you don't need to worry about smogging it.
Your reality may vary.
"big95yj" <shewy14@yahoo.com> wrote in message
news:1115343380.772418.40800@g14g2000cwa.googlegro ups.com...
> Hi there. I have a '95 YJ that I am planning an engine conversion for.
> I purchased an '88 wrecked Ford Bronco with a 351W fuel injected for
> $250. I am planning the engine for the Jeep. While I am ripping all the
> wiring and emissions components out of the Bronco, I am seriously
> considering ditching the fuel injection and emissions stuff and going
> carbuerated. The only problem is I live in Joliet, IL where emissions
> testing catches up with you every couple of years. I would like to
> still be able to cruise around in the converted Jeep, but not have the
> hastle of emissions testing. Does anyone know a legitemet way to avoid
> such testing? (such as insuring the vehicle as a recreational vehicle
> or something) I would appreciate any help I could get. Thanks.
>
older engine up to the standards for the year of your vehicle.
Basically, you have to use the emissions system for the newer of the engine
or the make of the vehicle. If you put in a motor from a 2000 into your
1995, then you would have to carry the smog stuff over to retain the 2000
emission system. If you put in an older motor, then you have to bring it up
to the smog standards in effect for 1995.
This is only true, as I understand the rules, if you plan to use the vehicle
on the highway. If you are making a machine strictly for offroading, then
you don't need to worry about smogging it.
Your reality may vary.
"big95yj" <shewy14@yahoo.com> wrote in message
news:1115343380.772418.40800@g14g2000cwa.googlegro ups.com...
> Hi there. I have a '95 YJ that I am planning an engine conversion for.
> I purchased an '88 wrecked Ford Bronco with a 351W fuel injected for
> $250. I am planning the engine for the Jeep. While I am ripping all the
> wiring and emissions components out of the Bronco, I am seriously
> considering ditching the fuel injection and emissions stuff and going
> carbuerated. The only problem is I live in Joliet, IL where emissions
> testing catches up with you every couple of years. I would like to
> still be able to cruise around in the converted Jeep, but not have the
> hastle of emissions testing. Does anyone know a legitemet way to avoid
> such testing? (such as insuring the vehicle as a recreational vehicle
> or something) I would appreciate any help I could get. Thanks.
>
05-06-2005, 02:47 PM
#12
Guest
Posts: n/a
Re: Ways around emssion laws???
In the Peoples Republic of California, you will be REQUIRED to bring the
older engine up to the standards for the year of your vehicle.
Basically, you have to use the emissions system for the newer of the engine
or the make of the vehicle. If you put in a motor from a 2000 into your
1995, then you would have to carry the smog stuff over to retain the 2000
emission system. If you put in an older motor, then you have to bring it up
to the smog standards in effect for 1995.
This is only true, as I understand the rules, if you plan to use the vehicle
on the highway. If you are making a machine strictly for offroading, then
you don't need to worry about smogging it.
Your reality may vary.
"big95yj" <shewy14@yahoo.com> wrote in message
news:1115343380.772418.40800@g14g2000cwa.googlegro ups.com...
> Hi there. I have a '95 YJ that I am planning an engine conversion for.
> I purchased an '88 wrecked Ford Bronco with a 351W fuel injected for
> $250. I am planning the engine for the Jeep. While I am ripping all the
> wiring and emissions components out of the Bronco, I am seriously
> considering ditching the fuel injection and emissions stuff and going
> carbuerated. The only problem is I live in Joliet, IL where emissions
> testing catches up with you every couple of years. I would like to
> still be able to cruise around in the converted Jeep, but not have the
> hastle of emissions testing. Does anyone know a legitemet way to avoid
> such testing? (such as insuring the vehicle as a recreational vehicle
> or something) I would appreciate any help I could get. Thanks.
>
older engine up to the standards for the year of your vehicle.
Basically, you have to use the emissions system for the newer of the engine
or the make of the vehicle. If you put in a motor from a 2000 into your
1995, then you would have to carry the smog stuff over to retain the 2000
emission system. If you put in an older motor, then you have to bring it up
to the smog standards in effect for 1995.
This is only true, as I understand the rules, if you plan to use the vehicle
on the highway. If you are making a machine strictly for offroading, then
you don't need to worry about smogging it.
Your reality may vary.
"big95yj" <shewy14@yahoo.com> wrote in message
news:1115343380.772418.40800@g14g2000cwa.googlegro ups.com...
> Hi there. I have a '95 YJ that I am planning an engine conversion for.
> I purchased an '88 wrecked Ford Bronco with a 351W fuel injected for
> $250. I am planning the engine for the Jeep. While I am ripping all the
> wiring and emissions components out of the Bronco, I am seriously
> considering ditching the fuel injection and emissions stuff and going
> carbuerated. The only problem is I live in Joliet, IL where emissions
> testing catches up with you every couple of years. I would like to
> still be able to cruise around in the converted Jeep, but not have the
> hastle of emissions testing. Does anyone know a legitemet way to avoid
> such testing? (such as insuring the vehicle as a recreational vehicle
> or something) I would appreciate any help I could get. Thanks.
>
05-06-2005, 02:47 PM
#13
Guest
Posts: n/a
Re: Ways around emssion laws???
In the Peoples Republic of California, you will be REQUIRED to bring the
older engine up to the standards for the year of your vehicle.
Basically, you have to use the emissions system for the newer of the engine
or the make of the vehicle. If you put in a motor from a 2000 into your
1995, then you would have to carry the smog stuff over to retain the 2000
emission system. If you put in an older motor, then you have to bring it up
to the smog standards in effect for 1995.
This is only true, as I understand the rules, if you plan to use the vehicle
on the highway. If you are making a machine strictly for offroading, then
you don't need to worry about smogging it.
Your reality may vary.
"big95yj" <shewy14@yahoo.com> wrote in message
news:1115343380.772418.40800@g14g2000cwa.googlegro ups.com...
> Hi there. I have a '95 YJ that I am planning an engine conversion for.
> I purchased an '88 wrecked Ford Bronco with a 351W fuel injected for
> $250. I am planning the engine for the Jeep. While I am ripping all the
> wiring and emissions components out of the Bronco, I am seriously
> considering ditching the fuel injection and emissions stuff and going
> carbuerated. The only problem is I live in Joliet, IL where emissions
> testing catches up with you every couple of years. I would like to
> still be able to cruise around in the converted Jeep, but not have the
> hastle of emissions testing. Does anyone know a legitemet way to avoid
> such testing? (such as insuring the vehicle as a recreational vehicle
> or something) I would appreciate any help I could get. Thanks.
>
older engine up to the standards for the year of your vehicle.
Basically, you have to use the emissions system for the newer of the engine
or the make of the vehicle. If you put in a motor from a 2000 into your
1995, then you would have to carry the smog stuff over to retain the 2000
emission system. If you put in an older motor, then you have to bring it up
to the smog standards in effect for 1995.
This is only true, as I understand the rules, if you plan to use the vehicle
on the highway. If you are making a machine strictly for offroading, then
you don't need to worry about smogging it.
Your reality may vary.
"big95yj" <shewy14@yahoo.com> wrote in message
news:1115343380.772418.40800@g14g2000cwa.googlegro ups.com...
> Hi there. I have a '95 YJ that I am planning an engine conversion for.
> I purchased an '88 wrecked Ford Bronco with a 351W fuel injected for
> $250. I am planning the engine for the Jeep. While I am ripping all the
> wiring and emissions components out of the Bronco, I am seriously
> considering ditching the fuel injection and emissions stuff and going
> carbuerated. The only problem is I live in Joliet, IL where emissions
> testing catches up with you every couple of years. I would like to
> still be able to cruise around in the converted Jeep, but not have the
> hastle of emissions testing. Does anyone know a legitemet way to avoid
> such testing? (such as insuring the vehicle as a recreational vehicle
> or something) I would appreciate any help I could get. Thanks.
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)