Be warned: Phoenix Remanufactured Transmissions
05-10-2006, 08:03 AM
#31
Guest
Posts: n/a
Re: Be warned: Phoenix Remanufactured Transmissions
HLS@nospam.nix wrote:
> "John S." <hjsjms@cs.com> wrote in message
> news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> >
> > ajcrm125 wrote:
> > > http://www.onecircuit.com/prtbad4u.html
> >
> > I suspect the problem is not with ALL Phoenix Remanufactured
> > Transmissiotn, but only the one that you happened to get. The real
> > issue is whether they were willing to make it right, and it would
> > appear that they were. Looks like the problem is on your end.
>
> Everybody wants to save a buck, but sometimes our efforts end up
> getting us deeper in the poop. These are hard lessons to be learned.
Not sure I understand what you are saying. Are you implying that
Phoenix reman transmissions are of poor quality?
05-10-2006, 11:58 AM
#32
Guest
Posts: n/a
Re: Be warned: Phoenix Remanufactured Transmissions
"John S." <hjsjms@cs.com> wrote in message
news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
>
> HLS@nospam.nix wrote:
> > "John S." <hjsjms@cs.com> wrote in message
> > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > >
> > > ajcrm125 wrote:
> > > > http://www.onecircuit.com/prtbad4u.html
> > >
> > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > Transmissiotn, but only the one that you happened to get. The real
> > > issue is whether they were willing to make it right, and it would
> > > appear that they were. Looks like the problem is on your end.
> >
> > Everybody wants to save a buck, but sometimes our efforts end up
> > getting us deeper in the poop. These are hard lessons to be learned.
>
> Not sure I understand what you are saying. Are you implying that
> Phoenix reman transmissions are of poor quality?
>
No, I believe that HLS@nospam.nix is saying, that there are reasons that "do
it yourself" is "usually" a way to save money. One reason is that the diy
customer assumes more risk. You have a chance of getting a bum unit, from
any vendor. For the do-it-yourselfer, this is a significant event and an
enormous pain in the neck. For a commercial shop, they recognize that it
happens once in a while, and deal with it.
This is not to say that the ordinary customer cannot benefit from doing his
own work. What it does say, is that sooner or later, if you replace enough
parts, you are going to get a bad one, and it is not really anyone's fault.
If you cannot handle it, when this happens, either financially, emotionally,
or in terms of lost time, then have other people do your work for you.
Earle
news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
>
> HLS@nospam.nix wrote:
> > "John S." <hjsjms@cs.com> wrote in message
> > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > >
> > > ajcrm125 wrote:
> > > > http://www.onecircuit.com/prtbad4u.html
> > >
> > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > Transmissiotn, but only the one that you happened to get. The real
> > > issue is whether they were willing to make it right, and it would
> > > appear that they were. Looks like the problem is on your end.
> >
> > Everybody wants to save a buck, but sometimes our efforts end up
> > getting us deeper in the poop. These are hard lessons to be learned.
>
> Not sure I understand what you are saying. Are you implying that
> Phoenix reman transmissions are of poor quality?
>
No, I believe that HLS@nospam.nix is saying, that there are reasons that "do
it yourself" is "usually" a way to save money. One reason is that the diy
customer assumes more risk. You have a chance of getting a bum unit, from
any vendor. For the do-it-yourselfer, this is a significant event and an
enormous pain in the neck. For a commercial shop, they recognize that it
happens once in a while, and deal with it.
This is not to say that the ordinary customer cannot benefit from doing his
own work. What it does say, is that sooner or later, if you replace enough
parts, you are going to get a bad one, and it is not really anyone's fault.
If you cannot handle it, when this happens, either financially, emotionally,
or in terms of lost time, then have other people do your work for you.
Earle
05-10-2006, 11:58 AM
#33
Guest
Posts: n/a
Re: Be warned: Phoenix Remanufactured Transmissions
"John S." <hjsjms@cs.com> wrote in message
news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
>
> HLS@nospam.nix wrote:
> > "John S." <hjsjms@cs.com> wrote in message
> > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > >
> > > ajcrm125 wrote:
> > > > http://www.onecircuit.com/prtbad4u.html
> > >
> > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > Transmissiotn, but only the one that you happened to get. The real
> > > issue is whether they were willing to make it right, and it would
> > > appear that they were. Looks like the problem is on your end.
> >
> > Everybody wants to save a buck, but sometimes our efforts end up
> > getting us deeper in the poop. These are hard lessons to be learned.
>
> Not sure I understand what you are saying. Are you implying that
> Phoenix reman transmissions are of poor quality?
>
No, I believe that HLS@nospam.nix is saying, that there are reasons that "do
it yourself" is "usually" a way to save money. One reason is that the diy
customer assumes more risk. You have a chance of getting a bum unit, from
any vendor. For the do-it-yourselfer, this is a significant event and an
enormous pain in the neck. For a commercial shop, they recognize that it
happens once in a while, and deal with it.
This is not to say that the ordinary customer cannot benefit from doing his
own work. What it does say, is that sooner or later, if you replace enough
parts, you are going to get a bad one, and it is not really anyone's fault.
If you cannot handle it, when this happens, either financially, emotionally,
or in terms of lost time, then have other people do your work for you.
Earle
news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
>
> HLS@nospam.nix wrote:
> > "John S." <hjsjms@cs.com> wrote in message
> > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > >
> > > ajcrm125 wrote:
> > > > http://www.onecircuit.com/prtbad4u.html
> > >
> > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > Transmissiotn, but only the one that you happened to get. The real
> > > issue is whether they were willing to make it right, and it would
> > > appear that they were. Looks like the problem is on your end.
> >
> > Everybody wants to save a buck, but sometimes our efforts end up
> > getting us deeper in the poop. These are hard lessons to be learned.
>
> Not sure I understand what you are saying. Are you implying that
> Phoenix reman transmissions are of poor quality?
>
No, I believe that HLS@nospam.nix is saying, that there are reasons that "do
it yourself" is "usually" a way to save money. One reason is that the diy
customer assumes more risk. You have a chance of getting a bum unit, from
any vendor. For the do-it-yourselfer, this is a significant event and an
enormous pain in the neck. For a commercial shop, they recognize that it
happens once in a while, and deal with it.
This is not to say that the ordinary customer cannot benefit from doing his
own work. What it does say, is that sooner or later, if you replace enough
parts, you are going to get a bad one, and it is not really anyone's fault.
If you cannot handle it, when this happens, either financially, emotionally,
or in terms of lost time, then have other people do your work for you.
Earle
05-10-2006, 11:58 AM
#34
Guest
Posts: n/a
Re: Be warned: Phoenix Remanufactured Transmissions
"John S." <hjsjms@cs.com> wrote in message
news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
>
> HLS@nospam.nix wrote:
> > "John S." <hjsjms@cs.com> wrote in message
> > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > >
> > > ajcrm125 wrote:
> > > > http://www.onecircuit.com/prtbad4u.html
> > >
> > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > Transmissiotn, but only the one that you happened to get. The real
> > > issue is whether they were willing to make it right, and it would
> > > appear that they were. Looks like the problem is on your end.
> >
> > Everybody wants to save a buck, but sometimes our efforts end up
> > getting us deeper in the poop. These are hard lessons to be learned.
>
> Not sure I understand what you are saying. Are you implying that
> Phoenix reman transmissions are of poor quality?
>
No, I believe that HLS@nospam.nix is saying, that there are reasons that "do
it yourself" is "usually" a way to save money. One reason is that the diy
customer assumes more risk. You have a chance of getting a bum unit, from
any vendor. For the do-it-yourselfer, this is a significant event and an
enormous pain in the neck. For a commercial shop, they recognize that it
happens once in a while, and deal with it.
This is not to say that the ordinary customer cannot benefit from doing his
own work. What it does say, is that sooner or later, if you replace enough
parts, you are going to get a bad one, and it is not really anyone's fault.
If you cannot handle it, when this happens, either financially, emotionally,
or in terms of lost time, then have other people do your work for you.
Earle
news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
>
> HLS@nospam.nix wrote:
> > "John S." <hjsjms@cs.com> wrote in message
> > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > >
> > > ajcrm125 wrote:
> > > > http://www.onecircuit.com/prtbad4u.html
> > >
> > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > Transmissiotn, but only the one that you happened to get. The real
> > > issue is whether they were willing to make it right, and it would
> > > appear that they were. Looks like the problem is on your end.
> >
> > Everybody wants to save a buck, but sometimes our efforts end up
> > getting us deeper in the poop. These are hard lessons to be learned.
>
> Not sure I understand what you are saying. Are you implying that
> Phoenix reman transmissions are of poor quality?
>
No, I believe that HLS@nospam.nix is saying, that there are reasons that "do
it yourself" is "usually" a way to save money. One reason is that the diy
customer assumes more risk. You have a chance of getting a bum unit, from
any vendor. For the do-it-yourselfer, this is a significant event and an
enormous pain in the neck. For a commercial shop, they recognize that it
happens once in a while, and deal with it.
This is not to say that the ordinary customer cannot benefit from doing his
own work. What it does say, is that sooner or later, if you replace enough
parts, you are going to get a bad one, and it is not really anyone's fault.
If you cannot handle it, when this happens, either financially, emotionally,
or in terms of lost time, then have other people do your work for you.
Earle
05-10-2006, 04:36 PM
#35
Guest
Posts: n/a
Re: Be warned: Phoenix Remanufactured Transmissions
"Earle Horton" <NurseBustersNoSpam@msn.com> wrote in message
news:44620c3c$0$6046$a82e2bb9@reader.athenanews.co m...
> "John S." <hjsjms@cs.com> wrote in message
> news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
> >
> > HLS@nospam.nix wrote:
> > > "John S." <hjsjms@cs.com> wrote in message
> > > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > > >
> > > > ajcrm125 wrote:
> > > > > http://www.onecircuit.com/prtbad4u.html
> > > >
> > > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > > Transmissiotn, but only the one that you happened to get. The real
> > > > issue is whether they were willing to make it right, and it would
> > > > appear that they were. Looks like the problem is on your end.
> > >
> > > Everybody wants to save a buck, but sometimes our efforts end up
> > > getting us deeper in the poop. These are hard lessons to be learned.
> >
> > Not sure I understand what you are saying. Are you implying that
> > Phoenix reman transmissions are of poor quality?
> >
> No, I believe that HLS@nospam.nix is saying, that there are reasons that
"do
> it yourself" is "usually" a way to save money. One reason is that the diy
> customer assumes more risk. You have a chance of getting a bum unit, from
> any vendor. For the do-it-yourselfer, this is a significant event and an
> enormous pain in the neck. For a commercial shop, they recognize that it
> happens once in a while, and deal with it.
>
> This is not to say that the ordinary customer cannot benefit from doing
his
> own work. What it does say, is that sooner or later, if you replace
enough
> parts, you are going to get a bad one, and it is not really anyone's
fault.
> If you cannot handle it, when this happens, either financially,
emotionally,
> or in terms of lost time, then have other people do your work for you.
That is complete bull. While it can happen that you will get a bad part,
there really is no excuse for two in a row. The fact that they are still in
business shows that they do not treat commercial shops that way and if they
send one a bad one, they make damn sure that the second one is ok. I guess
that they don't feel the need to back up the DIY'er that way. Thanks for
the info however. At least I know who to avoid if and when I need to get a
rebuilt trans.
--
If at first you don't succeed, you're not cut out for skydiving
news:44620c3c$0$6046$a82e2bb9@reader.athenanews.co m...
> "John S." <hjsjms@cs.com> wrote in message
> news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
> >
> > HLS@nospam.nix wrote:
> > > "John S." <hjsjms@cs.com> wrote in message
> > > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > > >
> > > > ajcrm125 wrote:
> > > > > http://www.onecircuit.com/prtbad4u.html
> > > >
> > > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > > Transmissiotn, but only the one that you happened to get. The real
> > > > issue is whether they were willing to make it right, and it would
> > > > appear that they were. Looks like the problem is on your end.
> > >
> > > Everybody wants to save a buck, but sometimes our efforts end up
> > > getting us deeper in the poop. These are hard lessons to be learned.
> >
> > Not sure I understand what you are saying. Are you implying that
> > Phoenix reman transmissions are of poor quality?
> >
> No, I believe that HLS@nospam.nix is saying, that there are reasons that
"do
> it yourself" is "usually" a way to save money. One reason is that the diy
> customer assumes more risk. You have a chance of getting a bum unit, from
> any vendor. For the do-it-yourselfer, this is a significant event and an
> enormous pain in the neck. For a commercial shop, they recognize that it
> happens once in a while, and deal with it.
>
> This is not to say that the ordinary customer cannot benefit from doing
his
> own work. What it does say, is that sooner or later, if you replace
enough
> parts, you are going to get a bad one, and it is not really anyone's
fault.
> If you cannot handle it, when this happens, either financially,
emotionally,
> or in terms of lost time, then have other people do your work for you.
That is complete bull. While it can happen that you will get a bad part,
there really is no excuse for two in a row. The fact that they are still in
business shows that they do not treat commercial shops that way and if they
send one a bad one, they make damn sure that the second one is ok. I guess
that they don't feel the need to back up the DIY'er that way. Thanks for
the info however. At least I know who to avoid if and when I need to get a
rebuilt trans.
--
If at first you don't succeed, you're not cut out for skydiving
05-10-2006, 04:36 PM
#36
Guest
Posts: n/a
Re: Be warned: Phoenix Remanufactured Transmissions
"Earle Horton" <NurseBustersNoSpam@msn.com> wrote in message
news:44620c3c$0$6046$a82e2bb9@reader.athenanews.co m...
> "John S." <hjsjms@cs.com> wrote in message
> news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
> >
> > HLS@nospam.nix wrote:
> > > "John S." <hjsjms@cs.com> wrote in message
> > > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > > >
> > > > ajcrm125 wrote:
> > > > > http://www.onecircuit.com/prtbad4u.html
> > > >
> > > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > > Transmissiotn, but only the one that you happened to get. The real
> > > > issue is whether they were willing to make it right, and it would
> > > > appear that they were. Looks like the problem is on your end.
> > >
> > > Everybody wants to save a buck, but sometimes our efforts end up
> > > getting us deeper in the poop. These are hard lessons to be learned.
> >
> > Not sure I understand what you are saying. Are you implying that
> > Phoenix reman transmissions are of poor quality?
> >
> No, I believe that HLS@nospam.nix is saying, that there are reasons that
"do
> it yourself" is "usually" a way to save money. One reason is that the diy
> customer assumes more risk. You have a chance of getting a bum unit, from
> any vendor. For the do-it-yourselfer, this is a significant event and an
> enormous pain in the neck. For a commercial shop, they recognize that it
> happens once in a while, and deal with it.
>
> This is not to say that the ordinary customer cannot benefit from doing
his
> own work. What it does say, is that sooner or later, if you replace
enough
> parts, you are going to get a bad one, and it is not really anyone's
fault.
> If you cannot handle it, when this happens, either financially,
emotionally,
> or in terms of lost time, then have other people do your work for you.
That is complete bull. While it can happen that you will get a bad part,
there really is no excuse for two in a row. The fact that they are still in
business shows that they do not treat commercial shops that way and if they
send one a bad one, they make damn sure that the second one is ok. I guess
that they don't feel the need to back up the DIY'er that way. Thanks for
the info however. At least I know who to avoid if and when I need to get a
rebuilt trans.
--
If at first you don't succeed, you're not cut out for skydiving
news:44620c3c$0$6046$a82e2bb9@reader.athenanews.co m...
> "John S." <hjsjms@cs.com> wrote in message
> news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
> >
> > HLS@nospam.nix wrote:
> > > "John S." <hjsjms@cs.com> wrote in message
> > > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > > >
> > > > ajcrm125 wrote:
> > > > > http://www.onecircuit.com/prtbad4u.html
> > > >
> > > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > > Transmissiotn, but only the one that you happened to get. The real
> > > > issue is whether they were willing to make it right, and it would
> > > > appear that they were. Looks like the problem is on your end.
> > >
> > > Everybody wants to save a buck, but sometimes our efforts end up
> > > getting us deeper in the poop. These are hard lessons to be learned.
> >
> > Not sure I understand what you are saying. Are you implying that
> > Phoenix reman transmissions are of poor quality?
> >
> No, I believe that HLS@nospam.nix is saying, that there are reasons that
"do
> it yourself" is "usually" a way to save money. One reason is that the diy
> customer assumes more risk. You have a chance of getting a bum unit, from
> any vendor. For the do-it-yourselfer, this is a significant event and an
> enormous pain in the neck. For a commercial shop, they recognize that it
> happens once in a while, and deal with it.
>
> This is not to say that the ordinary customer cannot benefit from doing
his
> own work. What it does say, is that sooner or later, if you replace
enough
> parts, you are going to get a bad one, and it is not really anyone's
fault.
> If you cannot handle it, when this happens, either financially,
emotionally,
> or in terms of lost time, then have other people do your work for you.
That is complete bull. While it can happen that you will get a bad part,
there really is no excuse for two in a row. The fact that they are still in
business shows that they do not treat commercial shops that way and if they
send one a bad one, they make damn sure that the second one is ok. I guess
that they don't feel the need to back up the DIY'er that way. Thanks for
the info however. At least I know who to avoid if and when I need to get a
rebuilt trans.
--
If at first you don't succeed, you're not cut out for skydiving
05-10-2006, 04:36 PM
#37
Guest
Posts: n/a
Re: Be warned: Phoenix Remanufactured Transmissions
"Earle Horton" <NurseBustersNoSpam@msn.com> wrote in message
news:44620c3c$0$6046$a82e2bb9@reader.athenanews.co m...
> "John S." <hjsjms@cs.com> wrote in message
> news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
> >
> > HLS@nospam.nix wrote:
> > > "John S." <hjsjms@cs.com> wrote in message
> > > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > > >
> > > > ajcrm125 wrote:
> > > > > http://www.onecircuit.com/prtbad4u.html
> > > >
> > > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > > Transmissiotn, but only the one that you happened to get. The real
> > > > issue is whether they were willing to make it right, and it would
> > > > appear that they were. Looks like the problem is on your end.
> > >
> > > Everybody wants to save a buck, but sometimes our efforts end up
> > > getting us deeper in the poop. These are hard lessons to be learned.
> >
> > Not sure I understand what you are saying. Are you implying that
> > Phoenix reman transmissions are of poor quality?
> >
> No, I believe that HLS@nospam.nix is saying, that there are reasons that
"do
> it yourself" is "usually" a way to save money. One reason is that the diy
> customer assumes more risk. You have a chance of getting a bum unit, from
> any vendor. For the do-it-yourselfer, this is a significant event and an
> enormous pain in the neck. For a commercial shop, they recognize that it
> happens once in a while, and deal with it.
>
> This is not to say that the ordinary customer cannot benefit from doing
his
> own work. What it does say, is that sooner or later, if you replace
enough
> parts, you are going to get a bad one, and it is not really anyone's
fault.
> If you cannot handle it, when this happens, either financially,
emotionally,
> or in terms of lost time, then have other people do your work for you.
That is complete bull. While it can happen that you will get a bad part,
there really is no excuse for two in a row. The fact that they are still in
business shows that they do not treat commercial shops that way and if they
send one a bad one, they make damn sure that the second one is ok. I guess
that they don't feel the need to back up the DIY'er that way. Thanks for
the info however. At least I know who to avoid if and when I need to get a
rebuilt trans.
--
If at first you don't succeed, you're not cut out for skydiving
news:44620c3c$0$6046$a82e2bb9@reader.athenanews.co m...
> "John S." <hjsjms@cs.com> wrote in message
> news:1147262595.009475.119880@j73g2000cwa.googlegr oups.com...
> >
> > HLS@nospam.nix wrote:
> > > "John S." <hjsjms@cs.com> wrote in message
> > > news:1146913701.104320.70590@i40g2000cwc.googlegro ups.com...
> > > >
> > > > ajcrm125 wrote:
> > > > > http://www.onecircuit.com/prtbad4u.html
> > > >
> > > > I suspect the problem is not with ALL Phoenix Remanufactured
> > > > Transmissiotn, but only the one that you happened to get. The real
> > > > issue is whether they were willing to make it right, and it would
> > > > appear that they were. Looks like the problem is on your end.
> > >
> > > Everybody wants to save a buck, but sometimes our efforts end up
> > > getting us deeper in the poop. These are hard lessons to be learned.
> >
> > Not sure I understand what you are saying. Are you implying that
> > Phoenix reman transmissions are of poor quality?
> >
> No, I believe that HLS@nospam.nix is saying, that there are reasons that
"do
> it yourself" is "usually" a way to save money. One reason is that the diy
> customer assumes more risk. You have a chance of getting a bum unit, from
> any vendor. For the do-it-yourselfer, this is a significant event and an
> enormous pain in the neck. For a commercial shop, they recognize that it
> happens once in a while, and deal with it.
>
> This is not to say that the ordinary customer cannot benefit from doing
his
> own work. What it does say, is that sooner or later, if you replace
enough
> parts, you are going to get a bad one, and it is not really anyone's
fault.
> If you cannot handle it, when this happens, either financially,
emotionally,
> or in terms of lost time, then have other people do your work for you.
That is complete bull. While it can happen that you will get a bad part,
there really is no excuse for two in a row. The fact that they are still in
business shows that they do not treat commercial shops that way and if they
send one a bad one, they make damn sure that the second one is ok. I guess
that they don't feel the need to back up the DIY'er that way. Thanks for
the info however. At least I know who to avoid if and when I need to get a
rebuilt trans.
--
If at first you don't succeed, you're not cut out for skydiving
05-10-2006, 05:42 PM
#38
Guest
Posts: n/a
Re: Be warned: Phoenix Remanufactured Transmissions
You don't do anything for yourself?
Why do you think products are warranted.
Forwarded to: abuse@rr.com for crossposting.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
TBone wrote:
>
> That is complete bull. While it can happen that you will get a bad part,
> there really is no excuse for two in a row. The fact that they are still in
> business shows that they do not treat commercial shops that way and if they
> send one a bad one, they make damn sure that the second one is ok. I guess
> that they don't feel the need to back up the DIY'er that way. Thanks for
> the info however. At least I know who to avoid if and when I need to get a
> rebuilt trans.
>
> --
> If at first you don't succeed, you're not cut out for skydiving
Why do you think products are warranted.
Forwarded to: abuse@rr.com for crossposting.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
TBone wrote:
>
> That is complete bull. While it can happen that you will get a bad part,
> there really is no excuse for two in a row. The fact that they are still in
> business shows that they do not treat commercial shops that way and if they
> send one a bad one, they make damn sure that the second one is ok. I guess
> that they don't feel the need to back up the DIY'er that way. Thanks for
> the info however. At least I know who to avoid if and when I need to get a
> rebuilt trans.
>
> --
> If at first you don't succeed, you're not cut out for skydiving
05-10-2006, 05:42 PM
#39
Guest
Posts: n/a
Re: Be warned: Phoenix Remanufactured Transmissions
You don't do anything for yourself?
Why do you think products are warranted.
Forwarded to: abuse@rr.com for crossposting.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
TBone wrote:
>
> That is complete bull. While it can happen that you will get a bad part,
> there really is no excuse for two in a row. The fact that they are still in
> business shows that they do not treat commercial shops that way and if they
> send one a bad one, they make damn sure that the second one is ok. I guess
> that they don't feel the need to back up the DIY'er that way. Thanks for
> the info however. At least I know who to avoid if and when I need to get a
> rebuilt trans.
>
> --
> If at first you don't succeed, you're not cut out for skydiving
Why do you think products are warranted.
Forwarded to: abuse@rr.com for crossposting.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
TBone wrote:
>
> That is complete bull. While it can happen that you will get a bad part,
> there really is no excuse for two in a row. The fact that they are still in
> business shows that they do not treat commercial shops that way and if they
> send one a bad one, they make damn sure that the second one is ok. I guess
> that they don't feel the need to back up the DIY'er that way. Thanks for
> the info however. At least I know who to avoid if and when I need to get a
> rebuilt trans.
>
> --
> If at first you don't succeed, you're not cut out for skydiving
05-10-2006, 05:42 PM
#40
Guest
Posts: n/a
Re: Be warned: Phoenix Remanufactured Transmissions
You don't do anything for yourself?
Why do you think products are warranted.
Forwarded to: abuse@rr.com for crossposting.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
TBone wrote:
>
> That is complete bull. While it can happen that you will get a bad part,
> there really is no excuse for two in a row. The fact that they are still in
> business shows that they do not treat commercial shops that way and if they
> send one a bad one, they make damn sure that the second one is ok. I guess
> that they don't feel the need to back up the DIY'er that way. Thanks for
> the info however. At least I know who to avoid if and when I need to get a
> rebuilt trans.
>
> --
> If at first you don't succeed, you're not cut out for skydiving
Why do you think products are warranted.
Forwarded to: abuse@rr.com for crossposting.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
TBone wrote:
>
> That is complete bull. While it can happen that you will get a bad part,
> there really is no excuse for two in a row. The fact that they are still in
> business shows that they do not treat commercial shops that way and if they
> send one a bad one, they make damn sure that the second one is ok. I guess
> that they don't feel the need to back up the DIY'er that way. Thanks for
> the info however. At least I know who to avoid if and when I need to get a
> rebuilt trans.
>
> --
> If at first you don't succeed, you're not cut out for skydiving