Transmission mount bolts
08-22-2003, 12:42 PM
#11
Guest
Posts: n/a
Re: Transmission mount bolts
Usually bolts without a shank are not the correct grade for the
application.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Scott wrote:
>
> Well that's what I've got, is a full thread bolt, that's as close as I
> seem to be able to get to the factory spec, 0.005" over in length, but
> no shoulder (assuming by shoulder you mean the unthreaded section at the
> head end of some bolts). So you're saying I should be good then?
application.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Scott wrote:
>
> Well that's what I've got, is a full thread bolt, that's as close as I
> seem to be able to get to the factory spec, 0.005" over in length, but
> no shoulder (assuming by shoulder you mean the unthreaded section at the
> head end of some bolts). So you're saying I should be good then?
08-22-2003, 09:20 PM
#12
Guest
Posts: n/a
Re: Transmission mount bolts
L.W.(ßill) ------ III wrote:
> Usually bolts without a shank are not the correct grade for the
> application.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Scott wrote:
>
>>Well that's what I've got, is a full thread bolt, that's as close as I
>>seem to be able to get to the factory spec, 0.005" over in length, but
>>no shoulder (assuming by shoulder you mean the unthreaded section at the
>>head end of some bolts). So you're saying I should be good then?
AFAICT, the manufacturer's spec doesn't say anything about a shoulder
bolt. The bolts I obtained are Grade 5.
> Usually bolts without a shank are not the correct grade for the
> application.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Scott wrote:
>
>>Well that's what I've got, is a full thread bolt, that's as close as I
>>seem to be able to get to the factory spec, 0.005" over in length, but
>>no shoulder (assuming by shoulder you mean the unthreaded section at the
>>head end of some bolts). So you're saying I should be good then?
AFAICT, the manufacturer's spec doesn't say anything about a shoulder
bolt. The bolts I obtained are Grade 5.
08-22-2003, 09:20 PM
#13
Guest
Posts: n/a
Re: Transmission mount bolts
L.W.(ßill) ------ III wrote:
> Usually bolts without a shank are not the correct grade for the
> application.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Scott wrote:
>
>>Well that's what I've got, is a full thread bolt, that's as close as I
>>seem to be able to get to the factory spec, 0.005" over in length, but
>>no shoulder (assuming by shoulder you mean the unthreaded section at the
>>head end of some bolts). So you're saying I should be good then?
AFAICT, the manufacturer's spec doesn't say anything about a shoulder
bolt. The bolts I obtained are Grade 5.
> Usually bolts without a shank are not the correct grade for the
> application.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Scott wrote:
>
>>Well that's what I've got, is a full thread bolt, that's as close as I
>>seem to be able to get to the factory spec, 0.005" over in length, but
>>no shoulder (assuming by shoulder you mean the unthreaded section at the
>>head end of some bolts). So you're saying I should be good then?
AFAICT, the manufacturer's spec doesn't say anything about a shoulder
bolt. The bolts I obtained are Grade 5.
Thread
Thread Starter
Forum
Replies
Last Post
MiplacedJeep
Jeep Mailing List
0
02-01-2004 12:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)