Christopher Vaughan

I'm planning on removing the 3" body lift from my 2002 Jeep TJ, and I
need a set of original TJ body mount bolts. I've only got one vehicle,
so removing the bolts and heading to the hardware store with them in
hand would be a headache, so I could really use one of the following
three things, in descending order of preference:

1) A link to someone who sells a new set of stock body mounting bolts
for a TJ, with or without new mounts. All the original height mount
kits I've found do not include the bolts.

2) Someone here who has a set of original TJ bolts they would be
willing to sell

3) A description of the bolts accurate enough I can take to a hardware
store and walk out with all the bolts I need.

Thanks!

mark

Consider taking ONE bolt off at the hardware store, take it inside, and
subtract 3" off of it.... Get the right bolt quality.

--
mark
www.hydrotoys.com

"Christopher Vaughan" <egrump@gmail.com> wrote in message
news:1138295628.920270.92160@g43g2000cwa.googlegro ups.com...
> I'm planning on removing the 3" body lift from my 2002 Jeep TJ, and I
> need a set of original TJ body mount bolts. I've only got one vehicle,
> so removing the bolts and heading to the hardware store with them in
> hand would be a headache, so I could really use one of the following
> three things, in descending order of preference:
>
> 1) A link to someone who sells a new set of stock body mounting bolts
> for a TJ, with or without new mounts. All the original height mount
> kits I've found do not include the bolts.
>
> 2) Someone here who has a set of original TJ bolts they would be
> willing to sell
>
> 3) A description of the bolts accurate enough I can take to a hardware
> store and walk out with all the bolts I need.
>
> Thanks!
>

mark

Consider taking ONE bolt off at the hardware store, take it inside, and
subtract 3" off of it.... Get the right bolt quality.

--
mark
www.hydrotoys.com

"Christopher Vaughan" <egrump@gmail.com> wrote in message
news:1138295628.920270.92160@g43g2000cwa.googlegro ups.com...
> I'm planning on removing the 3" body lift from my 2002 Jeep TJ, and I
> need a set of original TJ body mount bolts. I've only got one vehicle,
> so removing the bolts and heading to the hardware store with them in
> hand would be a headache, so I could really use one of the following
> three things, in descending order of preference:
>
> 1) A link to someone who sells a new set of stock body mounting bolts
> for a TJ, with or without new mounts. All the original height mount
> kits I've found do not include the bolts.
>
> 2) Someone here who has a set of original TJ bolts they would be
> willing to sell
>
> 3) A description of the bolts accurate enough I can take to a hardware
> store and walk out with all the bolts I need.
>
> Thanks!
>

mark

Consider taking ONE bolt off at the hardware store, take it inside, and
subtract 3" off of it.... Get the right bolt quality.

--
mark
www.hydrotoys.com

"Christopher Vaughan" <egrump@gmail.com> wrote in message
news:1138295628.920270.92160@g43g2000cwa.googlegro ups.com...
> I'm planning on removing the 3" body lift from my 2002 Jeep TJ, and I
> need a set of original TJ body mount bolts. I've only got one vehicle,
> so removing the bolts and heading to the hardware store with them in
> hand would be a headache, so I could really use one of the following
> three things, in descending order of preference:
>
> 1) A link to someone who sells a new set of stock body mounting bolts
> for a TJ, with or without new mounts. All the original height mount
> kits I've found do not include the bolts.
>
> 2) Someone here who has a set of original TJ bolts they would be
> willing to sell
>
> 3) A description of the bolts accurate enough I can take to a hardware
> store and walk out with all the bolts I need.
>
> Thanks!
>

Rusted

That is what I started to type, but then questioned if all the bolts were
the same length. Also you could always buy them a little long, thread on a
nut, then cut to length. When you remove the nut it will help to clean the
threads again.


"mark" <burpy@nowhere.com> wrote in message
news:B_cCf.11392$ZA5.7490@fed1read05...
> Consider taking ONE bolt off at the hardware store, take it inside, and
> subtract 3" off of it.... Get the right bolt quality.
>
> --
> mark
> www.hydrotoys.com
>
> "Christopher Vaughan" <egrump@gmail.com> wrote in message
> news:1138295628.920270.92160@g43g2000cwa.googlegro ups.com...
>> I'm planning on removing the 3" body lift from my 2002 Jeep TJ, and I
>> need a set of original TJ body mount bolts. I've only got one vehicle,
>> so removing the bolts and heading to the hardware store with them in
>> hand would be a headache, so I could really use one of the following
>> three things, in descending order of preference:
>>
>> 1) A link to someone who sells a new set of stock body mounting bolts
>> for a TJ, with or without new mounts. All the original height mount
>> kits I've found do not include the bolts.
>>
>> 2) Someone here who has a set of original TJ bolts they would be
>> willing to sell
>>
>> 3) A description of the bolts accurate enough I can take to a hardware
>> store and walk out with all the bolts I need.
>>
>> Thanks!
>>
>
>

Rusted

That is what I started to type, but then questioned if all the bolts were
the same length. Also you could always buy them a little long, thread on a
nut, then cut to length. When you remove the nut it will help to clean the
threads again.


"mark" <burpy@nowhere.com> wrote in message
news:B_cCf.11392$ZA5.7490@fed1read05...
> Consider taking ONE bolt off at the hardware store, take it inside, and
> subtract 3" off of it.... Get the right bolt quality.
>
> --
> mark
> www.hydrotoys.com
>
> "Christopher Vaughan" <egrump@gmail.com> wrote in message
> news:1138295628.920270.92160@g43g2000cwa.googlegro ups.com...
>> I'm planning on removing the 3" body lift from my 2002 Jeep TJ, and I
>> need a set of original TJ body mount bolts. I've only got one vehicle,
>> so removing the bolts and heading to the hardware store with them in
>> hand would be a headache, so I could really use one of the following
>> three things, in descending order of preference:
>>
>> 1) A link to someone who sells a new set of stock body mounting bolts
>> for a TJ, with or without new mounts. All the original height mount
>> kits I've found do not include the bolts.
>>
>> 2) Someone here who has a set of original TJ bolts they would be
>> willing to sell
>>
>> 3) A description of the bolts accurate enough I can take to a hardware
>> store and walk out with all the bolts I need.
>>
>> Thanks!
>>
>
>

Rusted

That is what I started to type, but then questioned if all the bolts were
the same length. Also you could always buy them a little long, thread on a
nut, then cut to length. When you remove the nut it will help to clean the
threads again.


"mark" <burpy@nowhere.com> wrote in message
news:B_cCf.11392$ZA5.7490@fed1read05...
> Consider taking ONE bolt off at the hardware store, take it inside, and
> subtract 3" off of it.... Get the right bolt quality.
>
> --
> mark
> www.hydrotoys.com
>
> "Christopher Vaughan" <egrump@gmail.com> wrote in message
> news:1138295628.920270.92160@g43g2000cwa.googlegro ups.com...
>> I'm planning on removing the 3" body lift from my 2002 Jeep TJ, and I
>> need a set of original TJ body mount bolts. I've only got one vehicle,
>> so removing the bolts and heading to the hardware store with them in
>> hand would be a headache, so I could really use one of the following
>> three things, in descending order of preference:
>>
>> 1) A link to someone who sells a new set of stock body mounting bolts
>> for a TJ, with or without new mounts. All the original height mount
>> kits I've found do not include the bolts.
>>
>> 2) Someone here who has a set of original TJ bolts they would be
>> willing to sell
>>
>> 3) A description of the bolts accurate enough I can take to a hardware
>> store and walk out with all the bolts I need.
>>
>> Thanks!
>>
>
>

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

I think you find you have to a lot improvising repairing the broken
out mounts.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Christopher Vaughan wrote:
>
> I'm planning on removing the 3" body lift from my 2002 Jeep TJ, and I
> need a set of original TJ body mount bolts. I've only got one vehicle,
> so removing the bolts and heading to the hardware store with them in
> hand would be a headache, so I could really use one of the following
> three things, in descending order of preference:
>
> 1) A link to someone who sells a new set of stock body mounting bolts
> for a TJ, with or without new mounts. All the original height mount
> kits I've found do not include the bolts.
>
> 2) Someone here who has a set of original TJ bolts they would be
> willing to sell
>
> 3) A description of the bolts accurate enough I can take to a hardware
> store and walk out with all the bolts I need.
>
> Thanks!

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

I think you find you have to a lot improvising repairing the broken
out mounts.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Christopher Vaughan wrote:
>
> I'm planning on removing the 3" body lift from my 2002 Jeep TJ, and I
> need a set of original TJ body mount bolts. I've only got one vehicle,
> so removing the bolts and heading to the hardware store with them in
> hand would be a headache, so I could really use one of the following
> three things, in descending order of preference:
>
> 1) A link to someone who sells a new set of stock body mounting bolts
> for a TJ, with or without new mounts. All the original height mount
> kits I've found do not include the bolts.
>
> 2) Someone here who has a set of original TJ bolts they would be
> willing to sell
>
> 3) A description of the bolts accurate enough I can take to a hardware
> store and walk out with all the bolts I need.
>
> Thanks!

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

I think you find you have to a lot improvising repairing the broken
out mounts.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Christopher Vaughan wrote:
>
> I'm planning on removing the 3" body lift from my 2002 Jeep TJ, and I
> need a set of original TJ body mount bolts. I've only got one vehicle,
> so removing the bolts and heading to the hardware store with them in
> hand would be a headache, so I could really use one of the following
> three things, in descending order of preference:
>
> 1) A link to someone who sells a new set of stock body mounting bolts
> for a TJ, with or without new mounts. All the original height mount
> kits I've found do not include the bolts.
>
> 2) Someone here who has a set of original TJ bolts they would be
> willing to sell
>
> 3) A description of the bolts accurate enough I can take to a hardware
> store and walk out with all the bolts I need.
>
> Thanks!