Original TJ Body Mount Bolts
01-27-2006, 08:05 AM
#31
Guest
Posts: n/a
Re: Original TJ Body Mount Bolts
All you need do is look at the price sticker. The shock will put buying 6
nuts/bolts into perspective.
That and you needn't actually buy the bolts from them.... just find out the
sizes....
"Chris Vaughan" <egrump@gmail.com> wrote in message
news:1138364781.067303.272860@g14g2000cwa.googlegr oups.com...
>
> billy ray wrote:
>> Why not just stop by the parts counter at his local Jeep dealer and ask?
>>
>>
>> "Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
>> news:43da199a$0$3874$a82e2bb9@reader.athenanews.co m...
>> > He may want to know how many of each.
>> >
>> > Earle
>> >
>> > "Jerry Bransford" <jerrypb@***.net> wrote in message
>> > news:%thCf.46189$V.1480@fed1read04...
>> >> There are two different lengths, keep pulling bolts until you get two
>> >> different lengths then buy the 3" shorter replacements.
>
> Yeah, that's what I'm going to do. I was trying to avoid the
> dealership, but it's not THAT painful. My choices had been to either
> remove the body lift myself or trade the whole jeep in on a brand new
> Rubicon. I'd hate to get to the dealership and see a shiny red Rubicon
> on the lot, and be tempted beyond my ability to bear.
>
> :)
>
nuts/bolts into perspective.
That and you needn't actually buy the bolts from them.... just find out the
sizes....
"Chris Vaughan" <egrump@gmail.com> wrote in message
news:1138364781.067303.272860@g14g2000cwa.googlegr oups.com...
>
> billy ray wrote:
>> Why not just stop by the parts counter at his local Jeep dealer and ask?
>>
>>
>> "Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
>> news:43da199a$0$3874$a82e2bb9@reader.athenanews.co m...
>> > He may want to know how many of each.
>> >
>> > Earle
>> >
>> > "Jerry Bransford" <jerrypb@***.net> wrote in message
>> > news:%thCf.46189$V.1480@fed1read04...
>> >> There are two different lengths, keep pulling bolts until you get two
>> >> different lengths then buy the 3" shorter replacements.
>
> Yeah, that's what I'm going to do. I was trying to avoid the
> dealership, but it's not THAT painful. My choices had been to either
> remove the body lift myself or trade the whole jeep in on a brand new
> Rubicon. I'd hate to get to the dealership and see a shiny red Rubicon
> on the lot, and be tempted beyond my ability to bear.
>
> :)
>
01-27-2006, 08:11 AM
#32
Guest
Posts: n/a
Re: Original TJ Body Mount Bolts
billy ray wrote:
> All you need do is look at the price sticker. The shock will put buying 6
> nuts/bolts into perspective.
>
> That and you needn't actually buy the bolts from them.... just find out the
> sizes....
They are sure proud of their stuff, ain't they?
01-27-2006, 08:11 AM
#33
Guest
Posts: n/a
Re: Original TJ Body Mount Bolts
billy ray wrote:
> All you need do is look at the price sticker. The shock will put buying 6
> nuts/bolts into perspective.
>
> That and you needn't actually buy the bolts from them.... just find out the
> sizes....
They are sure proud of their stuff, ain't they?
01-27-2006, 08:11 AM
#34
Guest
Posts: n/a
Re: Original TJ Body Mount Bolts
billy ray wrote:
> All you need do is look at the price sticker. The shock will put buying 6
> nuts/bolts into perspective.
>
> That and you needn't actually buy the bolts from them.... just find out the
> sizes....
They are sure proud of their stuff, ain't they?
01-27-2006, 12:09 PM
#35
Guest
Posts: n/a
Re: Original TJ Body Mount Bolts
Chris Vaughan wrote:
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
For the late CJ series the only bolt that was different was the grill
mount, if memory serves. /Maybe/ the cowl mounts, too. You could
eyeball each mount to look for obvious differences and pull
representative samples to compare against each other, then put all but
one back in. You're going to have to bust them loose later anyway.
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
For the late CJ series the only bolt that was different was the grill
mount, if memory serves. /Maybe/ the cowl mounts, too. You could
eyeball each mount to look for obvious differences and pull
representative samples to compare against each other, then put all but
one back in. You're going to have to bust them loose later anyway.
01-27-2006, 12:09 PM
#36
Guest
Posts: n/a
Re: Original TJ Body Mount Bolts
Chris Vaughan wrote:
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
For the late CJ series the only bolt that was different was the grill
mount, if memory serves. /Maybe/ the cowl mounts, too. You could
eyeball each mount to look for obvious differences and pull
representative samples to compare against each other, then put all but
one back in. You're going to have to bust them loose later anyway.
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
For the late CJ series the only bolt that was different was the grill
mount, if memory serves. /Maybe/ the cowl mounts, too. You could
eyeball each mount to look for obvious differences and pull
representative samples to compare against each other, then put all but
one back in. You're going to have to bust them loose later anyway.
01-27-2006, 12:09 PM
#37
Guest
Posts: n/a
Re: Original TJ Body Mount Bolts
Chris Vaughan wrote:
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
For the late CJ series the only bolt that was different was the grill
mount, if memory serves. /Maybe/ the cowl mounts, too. You could
eyeball each mount to look for obvious differences and pull
representative samples to compare against each other, then put all but
one back in. You're going to have to bust them loose later anyway.
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
For the late CJ series the only bolt that was different was the grill
mount, if memory serves. /Maybe/ the cowl mounts, too. You could
eyeball each mount to look for obvious differences and pull
representative samples to compare against each other, then put all but
one back in. You're going to have to bust them loose later anyway.
01-27-2006, 12:30 PM
#38
Guest
Posts: n/a
Re: Original TJ Body Mount Bolts
Chris Vaughan wrote:
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
This might help: <URL:http://www.bc4x4.com/faqs/yj.cfm?cat=2&faqid=8>
It is a conversation about _adding_ a 1" lift to a YJ.
> You'll need to buy some Grade 8 bolts as well:
> Original Size New Size
> 6 x 4-1/2"x1/2" 6 x 4-3/4"x1/2"
> 5 x 3-1/2"x7/16" 5 x 3-5/8"x7/16"
My completely SWAG is that the bolts should be the same.
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
This might help: <URL:http://www.bc4x4.com/faqs/yj.cfm?cat=2&faqid=8>
It is a conversation about _adding_ a 1" lift to a YJ.
> You'll need to buy some Grade 8 bolts as well:
> Original Size New Size
> 6 x 4-1/2"x1/2" 6 x 4-3/4"x1/2"
> 5 x 3-1/2"x7/16" 5 x 3-5/8"x7/16"
My completely SWAG is that the bolts should be the same.
01-27-2006, 12:30 PM
#39
Guest
Posts: n/a
Re: Original TJ Body Mount Bolts
Chris Vaughan wrote:
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
This might help: <URL:http://www.bc4x4.com/faqs/yj.cfm?cat=2&faqid=8>
It is a conversation about _adding_ a 1" lift to a YJ.
> You'll need to buy some Grade 8 bolts as well:
> Original Size New Size
> 6 x 4-1/2"x1/2" 6 x 4-3/4"x1/2"
> 5 x 3-1/2"x7/16" 5 x 3-5/8"x7/16"
My completely SWAG is that the bolts should be the same.
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
This might help: <URL:http://www.bc4x4.com/faqs/yj.cfm?cat=2&faqid=8>
It is a conversation about _adding_ a 1" lift to a YJ.
> You'll need to buy some Grade 8 bolts as well:
> Original Size New Size
> 6 x 4-1/2"x1/2" 6 x 4-3/4"x1/2"
> 5 x 3-1/2"x7/16" 5 x 3-5/8"x7/16"
My completely SWAG is that the bolts should be the same.
01-27-2006, 12:30 PM
#40
Guest
Posts: n/a
Re: Original TJ Body Mount Bolts
Chris Vaughan wrote:
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
This might help: <URL:http://www.bc4x4.com/faqs/yj.cfm?cat=2&faqid=8>
It is a conversation about _adding_ a 1" lift to a YJ.
> You'll need to buy some Grade 8 bolts as well:
> Original Size New Size
> 6 x 4-1/2"x1/2" 6 x 4-3/4"x1/2"
> 5 x 3-1/2"x7/16" 5 x 3-5/8"x7/16"
My completely SWAG is that the bolts should be the same.
> Rusted wrote:
>
>>That is what I started to type, but then questioned if all the bolts were
>>the same length. Also you could always buy them a little long, thread on a
>>nut, then cut to length. When you remove the nut it will help to clean the
>>threads again.
>
>
> I'm thinking there are two different sized bolts. I may end up making a
> trip up to the local jeep dealership and spend some time talking to
> their parts guy.
>
> Thanks for the reply...
This might help: <URL:http://www.bc4x4.com/faqs/yj.cfm?cat=2&faqid=8>
It is a conversation about _adding_ a 1" lift to a YJ.
> You'll need to buy some Grade 8 bolts as well:
> Original Size New Size
> 6 x 4-1/2"x1/2" 6 x 4-3/4"x1/2"
> 5 x 3-1/2"x7/16" 5 x 3-5/8"x7/16"
My completely SWAG is that the bolts should be the same.