Transmission Fluid Change Question
08-15-2006, 11:31 AM
#2
Guest
Posts: n/a
Re: Transmission Fluid Change Question
Ed,
If you can change your own oil and filter you can change the tranny filter
and fluid.
It does not require any special tools other than a pair of ramps, jack
stands, or a handy retaining wall to lift the GC to a comfortable height to
be crawling underneath..
"Ed Wojciechowski" <wojo@andrew.cmu.edu> wrote in message
news:58613421.1155631166@DELLME02.ME.cmu.edu...
>I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
>out the filter and fluid on this. Any thoughts or comments are
>appreciated.....
If you can change your own oil and filter you can change the tranny filter
and fluid.
It does not require any special tools other than a pair of ramps, jack
stands, or a handy retaining wall to lift the GC to a comfortable height to
be crawling underneath..
"Ed Wojciechowski" <wojo@andrew.cmu.edu> wrote in message
news:58613421.1155631166@DELLME02.ME.cmu.edu...
>I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
>out the filter and fluid on this. Any thoughts or comments are
>appreciated.....
08-15-2006, 11:31 AM
#3
Guest
Posts: n/a
Re: Transmission Fluid Change Question
Ed,
If you can change your own oil and filter you can change the tranny filter
and fluid.
It does not require any special tools other than a pair of ramps, jack
stands, or a handy retaining wall to lift the GC to a comfortable height to
be crawling underneath..
"Ed Wojciechowski" <wojo@andrew.cmu.edu> wrote in message
news:58613421.1155631166@DELLME02.ME.cmu.edu...
>I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
>out the filter and fluid on this. Any thoughts or comments are
>appreciated.....
If you can change your own oil and filter you can change the tranny filter
and fluid.
It does not require any special tools other than a pair of ramps, jack
stands, or a handy retaining wall to lift the GC to a comfortable height to
be crawling underneath..
"Ed Wojciechowski" <wojo@andrew.cmu.edu> wrote in message
news:58613421.1155631166@DELLME02.ME.cmu.edu...
>I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
>out the filter and fluid on this. Any thoughts or comments are
>appreciated.....
08-15-2006, 11:31 AM
#4
Guest
Posts: n/a
Re: Transmission Fluid Change Question
Ed,
If you can change your own oil and filter you can change the tranny filter
and fluid.
It does not require any special tools other than a pair of ramps, jack
stands, or a handy retaining wall to lift the GC to a comfortable height to
be crawling underneath..
"Ed Wojciechowski" <wojo@andrew.cmu.edu> wrote in message
news:58613421.1155631166@DELLME02.ME.cmu.edu...
>I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
>out the filter and fluid on this. Any thoughts or comments are
>appreciated.....
If you can change your own oil and filter you can change the tranny filter
and fluid.
It does not require any special tools other than a pair of ramps, jack
stands, or a handy retaining wall to lift the GC to a comfortable height to
be crawling underneath..
"Ed Wojciechowski" <wojo@andrew.cmu.edu> wrote in message
news:58613421.1155631166@DELLME02.ME.cmu.edu...
>I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
>out the filter and fluid on this. Any thoughts or comments are
>appreciated.....
08-15-2006, 11:31 AM
#5
Guest
Posts: n/a
Re: Transmission Fluid Change Question
Ed,
If you can change your own oil and filter you can change the tranny filter
and fluid.
It does not require any special tools other than a pair of ramps, jack
stands, or a handy retaining wall to lift the GC to a comfortable height to
be crawling underneath..
"Ed Wojciechowski" <wojo@andrew.cmu.edu> wrote in message
news:58613421.1155631166@DELLME02.ME.cmu.edu...
>I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
>out the filter and fluid on this. Any thoughts or comments are
>appreciated.....
If you can change your own oil and filter you can change the tranny filter
and fluid.
It does not require any special tools other than a pair of ramps, jack
stands, or a handy retaining wall to lift the GC to a comfortable height to
be crawling underneath..
"Ed Wojciechowski" <wojo@andrew.cmu.edu> wrote in message
news:58613421.1155631166@DELLME02.ME.cmu.edu...
>I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
>out the filter and fluid on this. Any thoughts or comments are
>appreciated.....
08-15-2006, 05:25 PM
#6
Guest
Posts: n/a
Re: Transmission Fluid Change Question
Hi Ed,
The problem is the torque converter doesn't have a drain plug, and
should be flushed with the proper equipment:
http://www.wjjeeps.com/service/transmission.htm Some say you drill and
tap it.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Ed Wojciechowski wrote:
>
> I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
> out the filter and fluid on this. Any thoughts or comments are
> appreciated.....
The problem is the torque converter doesn't have a drain plug, and
should be flushed with the proper equipment:
http://www.wjjeeps.com/service/transmission.htm Some say you drill and
tap it.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Ed Wojciechowski wrote:
>
> I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
> out the filter and fluid on this. Any thoughts or comments are
> appreciated.....
08-15-2006, 05:25 PM
#7
Guest
Posts: n/a
Re: Transmission Fluid Change Question
Hi Ed,
The problem is the torque converter doesn't have a drain plug, and
should be flushed with the proper equipment:
http://www.wjjeeps.com/service/transmission.htm Some say you drill and
tap it.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Ed Wojciechowski wrote:
>
> I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
> out the filter and fluid on this. Any thoughts or comments are
> appreciated.....
The problem is the torque converter doesn't have a drain plug, and
should be flushed with the proper equipment:
http://www.wjjeeps.com/service/transmission.htm Some say you drill and
tap it.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Ed Wojciechowski wrote:
>
> I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
> out the filter and fluid on this. Any thoughts or comments are
> appreciated.....
08-15-2006, 05:25 PM
#8
Guest
Posts: n/a
Re: Transmission Fluid Change Question
Hi Ed,
The problem is the torque converter doesn't have a drain plug, and
should be flushed with the proper equipment:
http://www.wjjeeps.com/service/transmission.htm Some say you drill and
tap it.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Ed Wojciechowski wrote:
>
> I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
> out the filter and fluid on this. Any thoughts or comments are
> appreciated.....
The problem is the torque converter doesn't have a drain plug, and
should be flushed with the proper equipment:
http://www.wjjeeps.com/service/transmission.htm Some say you drill and
tap it.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Ed Wojciechowski wrote:
>
> I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
> out the filter and fluid on this. Any thoughts or comments are
> appreciated.....
08-15-2006, 05:25 PM
#9
Guest
Posts: n/a
Re: Transmission Fluid Change Question
Hi Ed,
The problem is the torque converter doesn't have a drain plug, and
should be flushed with the proper equipment:
http://www.wjjeeps.com/service/transmission.htm Some say you drill and
tap it.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Ed Wojciechowski wrote:
>
> I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
> out the filter and fluid on this. Any thoughts or comments are
> appreciated.....
The problem is the torque converter doesn't have a drain plug, and
should be flushed with the proper equipment:
http://www.wjjeeps.com/service/transmission.htm Some say you drill and
tap it.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Ed Wojciechowski wrote:
>
> I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to change
> out the filter and fluid on this. Any thoughts or comments are
> appreciated.....
08-15-2006, 05:53 PM
#10
Guest
Posts: n/a
Re: Transmission Fluid Change Question
If this is a concern change it twice. If what you drain the second time is
reasonably clean, don't worry too much.
Earle
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:44E23BC8.DCF091A4@***.net...
> Hi Ed,
> The problem is the torque converter doesn't have a drain plug, and
> should be flushed with the proper equipment:
> http://www.wjjeeps.com/service/transmission.htm Some say you drill and
> tap it.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Ed Wojciechowski wrote:
> >
> > I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to
change
> > out the filter and fluid on this. Any thoughts or comments are
> > appreciated.....
reasonably clean, don't worry too much.
Earle
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:44E23BC8.DCF091A4@***.net...
> Hi Ed,
> The problem is the torque converter doesn't have a drain plug, and
> should be flushed with the proper equipment:
> http://www.wjjeeps.com/service/transmission.htm Some say you drill and
> tap it.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Ed Wojciechowski wrote:
> >
> > I have a '96 GC 4.0 w/167k on it. I was wondering how hard it is to
change
> > out the filter and fluid on this. Any thoughts or comments are
> > appreciated.....