Re: Trailer wiring question
On Mon, 16 Jul 2007 21:12:05 -0700, Garth Almgren <nospam@mukyj.com>
wrote: >Around 7/16/2007 8:54 PM, RSMuddog via CarKB.com wrote: > >> why don't you just figure out which wire has power only when the tail lights >> are on and you'd be good to go? OR am I missing something? > > >What you're missing is standard 4-flat trailer wiring: One wire for >ground, one wire for running lights, one wire for left brake/turn, and >one for right brake/turn. :) > > >Besides, since the Jeep has a combination brake/turn signal in the rear >(one dual-filament bulb does triple duty as running lights, brake >lights, and turn signals) and is one year early for a CHMSL (center >high-mounted stop light), there is no single wire that does only brakes. The problem here is that, unless the brakes are applied, the LED assy is still going to get left or right turn signal power, and the LED is going to blink. As long as you always apply the brakes before you activate the turn signals, what you propose will work. Of course that is not normal operation. Right off hand I don't know how you would make it work like you want. I'll sleep on it. :-) ---- -- Posted via a free Usenet account from http://www.teranews.com |
Re: Trailer wiring question
On Mon, 16 Jul 2007 21:12:05 -0700, Garth Almgren <nospam@mukyj.com>
wrote: >Around 7/16/2007 8:54 PM, RSMuddog via CarKB.com wrote: > >> why don't you just figure out which wire has power only when the tail lights >> are on and you'd be good to go? OR am I missing something? > > >What you're missing is standard 4-flat trailer wiring: One wire for >ground, one wire for running lights, one wire for left brake/turn, and >one for right brake/turn. :) > > >Besides, since the Jeep has a combination brake/turn signal in the rear >(one dual-filament bulb does triple duty as running lights, brake >lights, and turn signals) and is one year early for a CHMSL (center >high-mounted stop light), there is no single wire that does only brakes. The problem here is that, unless the brakes are applied, the LED assy is still going to get left or right turn signal power, and the LED is going to blink. As long as you always apply the brakes before you activate the turn signals, what you propose will work. Of course that is not normal operation. Right off hand I don't know how you would make it work like you want. I'll sleep on it. :-) ---- -- Posted via a free Usenet account from http://www.teranews.com |
Re: Trailer wiring question
On Mon, 16 Jul 2007 21:12:05 -0700, Garth Almgren <nospam@mukyj.com>
wrote: >Around 7/16/2007 8:54 PM, RSMuddog via CarKB.com wrote: > >> why don't you just figure out which wire has power only when the tail lights >> are on and you'd be good to go? OR am I missing something? > > >What you're missing is standard 4-flat trailer wiring: One wire for >ground, one wire for running lights, one wire for left brake/turn, and >one for right brake/turn. :) > > >Besides, since the Jeep has a combination brake/turn signal in the rear >(one dual-filament bulb does triple duty as running lights, brake >lights, and turn signals) and is one year early for a CHMSL (center >high-mounted stop light), there is no single wire that does only brakes. The problem here is that, unless the brakes are applied, the LED assy is still going to get left or right turn signal power, and the LED is going to blink. As long as you always apply the brakes before you activate the turn signals, what you propose will work. Of course that is not normal operation. Right off hand I don't know how you would make it work like you want. I'll sleep on it. :-) ---- -- Posted via a free Usenet account from http://www.teranews.com |
Re: Trailer wiring question
Don't you have a wire leading to that Mexican third light, that everyone
takes off and throws away? http://www.4x4xplor.com/images/LoD/LoD-12.jpg God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "Garth Almgren" <nospam@mukyj.com> wrote in message news:5g2qu4F3e9u76U1@mid.individual.net... > So, I just picked up a cheap hitch cover with LED brake light built in > that plugs into the trailer wiring connector. Problem is, it only taps > the green lead, so the light behaves exactly like the right brake/turn > light and blinks when I'm signaling right. > > My goals are as follows: > 1) Have the hitch light be on when the brakes are on. > 2) Have the hitch light NOT blink when either turn signal is on. > 3) Not damage my Jeep's electrical system in any way. > > The question is this: Can I use an isolating diode (like the Roadmaster > Hy-Power) to connect both the left (yellow) and right (green) feeds > together and use that as an input for the LED array? > > My thinking is that when the brakes are on, I've got #1 covered, since > both inputs to the diode are giving a solid 12v. When one turn signal or > the other is on, the light will still be getting a solid 12v from > whichever light isn't blinking, taking care of #2. I'm still good on #3 > as well, since the diode would protect the left and right circuits from > interfering with each other. > > I think I've got this right and was just going to start experimenting, > but first I wanted someone with more electronics experience to check my > thinking so I wouldn't accidentally miss goal #3. :) > > > -- > ~/Garth - 1993 Wrangler S 2.5 > { }|||||||{ } "MukYJ" -- Posted via a free Usenet account from http://www.teranews.com |
Re: Trailer wiring question
Don't you have a wire leading to that Mexican third light, that everyone
takes off and throws away? http://www.4x4xplor.com/images/LoD/LoD-12.jpg God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "Garth Almgren" <nospam@mukyj.com> wrote in message news:5g2qu4F3e9u76U1@mid.individual.net... > So, I just picked up a cheap hitch cover with LED brake light built in > that plugs into the trailer wiring connector. Problem is, it only taps > the green lead, so the light behaves exactly like the right brake/turn > light and blinks when I'm signaling right. > > My goals are as follows: > 1) Have the hitch light be on when the brakes are on. > 2) Have the hitch light NOT blink when either turn signal is on. > 3) Not damage my Jeep's electrical system in any way. > > The question is this: Can I use an isolating diode (like the Roadmaster > Hy-Power) to connect both the left (yellow) and right (green) feeds > together and use that as an input for the LED array? > > My thinking is that when the brakes are on, I've got #1 covered, since > both inputs to the diode are giving a solid 12v. When one turn signal or > the other is on, the light will still be getting a solid 12v from > whichever light isn't blinking, taking care of #2. I'm still good on #3 > as well, since the diode would protect the left and right circuits from > interfering with each other. > > I think I've got this right and was just going to start experimenting, > but first I wanted someone with more electronics experience to check my > thinking so I wouldn't accidentally miss goal #3. :) > > > -- > ~/Garth - 1993 Wrangler S 2.5 > { }|||||||{ } "MukYJ" -- Posted via a free Usenet account from http://www.teranews.com |
Re: Trailer wiring question
Don't you have a wire leading to that Mexican third light, that everyone
takes off and throws away? http://www.4x4xplor.com/images/LoD/LoD-12.jpg God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "Garth Almgren" <nospam@mukyj.com> wrote in message news:5g2qu4F3e9u76U1@mid.individual.net... > So, I just picked up a cheap hitch cover with LED brake light built in > that plugs into the trailer wiring connector. Problem is, it only taps > the green lead, so the light behaves exactly like the right brake/turn > light and blinks when I'm signaling right. > > My goals are as follows: > 1) Have the hitch light be on when the brakes are on. > 2) Have the hitch light NOT blink when either turn signal is on. > 3) Not damage my Jeep's electrical system in any way. > > The question is this: Can I use an isolating diode (like the Roadmaster > Hy-Power) to connect both the left (yellow) and right (green) feeds > together and use that as an input for the LED array? > > My thinking is that when the brakes are on, I've got #1 covered, since > both inputs to the diode are giving a solid 12v. When one turn signal or > the other is on, the light will still be getting a solid 12v from > whichever light isn't blinking, taking care of #2. I'm still good on #3 > as well, since the diode would protect the left and right circuits from > interfering with each other. > > I think I've got this right and was just going to start experimenting, > but first I wanted someone with more electronics experience to check my > thinking so I wouldn't accidentally miss goal #3. :) > > > -- > ~/Garth - 1993 Wrangler S 2.5 > { }|||||||{ } "MukYJ" -- Posted via a free Usenet account from http://www.teranews.com |
Re: Trailer wiring question
Don't you have a wire leading to that Mexican third light, that everyone
takes off and throws away? http://www.4x4xplor.com/images/LoD/LoD-12.jpg God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "Garth Almgren" <nospam@mukyj.com> wrote in message news:5g2qu4F3e9u76U1@mid.individual.net... > So, I just picked up a cheap hitch cover with LED brake light built in > that plugs into the trailer wiring connector. Problem is, it only taps > the green lead, so the light behaves exactly like the right brake/turn > light and blinks when I'm signaling right. > > My goals are as follows: > 1) Have the hitch light be on when the brakes are on. > 2) Have the hitch light NOT blink when either turn signal is on. > 3) Not damage my Jeep's electrical system in any way. > > The question is this: Can I use an isolating diode (like the Roadmaster > Hy-Power) to connect both the left (yellow) and right (green) feeds > together and use that as an input for the LED array? > > My thinking is that when the brakes are on, I've got #1 covered, since > both inputs to the diode are giving a solid 12v. When one turn signal or > the other is on, the light will still be getting a solid 12v from > whichever light isn't blinking, taking care of #2. I'm still good on #3 > as well, since the diode would protect the left and right circuits from > interfering with each other. > > I think I've got this right and was just going to start experimenting, > but first I wanted someone with more electronics experience to check my > thinking so I wouldn't accidentally miss goal #3. :) > > > -- > ~/Garth - 1993 Wrangler S 2.5 > { }|||||||{ } "MukYJ" -- Posted via a free Usenet account from http://www.teranews.com |
Re: Trailer wiring question
Do you have a "third brake light" you can tap into?
Spdloader |
Re: Trailer wiring question
Do you have a "third brake light" you can tap into?
Spdloader |
Re: Trailer wiring question
Do you have a "third brake light" you can tap into?
Spdloader |
All times are GMT -4. The time now is 03:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands