Tow Hooks for 01 TJ
Guest
Posts: n/a
Re: Tow Hooks for 01 TJ
Great pull Bill. Very good article.
Brian
<a href="http://members.aol.com/brimiljeep/WebPages/wwwDriveToWWII.html">
Brian's Military Jeeps of WWII www.Drive.To/WWII </a>
<a href="http://members.aol.com:/brimiljeep/WebPages/SquadronPatchPage.html">
Squadron Patches of WWII </a>
Brian
<a href="http://members.aol.com/brimiljeep/WebPages/wwwDriveToWWII.html">
Brian's Military Jeeps of WWII www.Drive.To/WWII </a>
<a href="http://members.aol.com:/brimiljeep/WebPages/SquadronPatchPage.html">
Squadron Patches of WWII </a>
Guest
Posts: n/a
Re: Tow Hooks for 01 TJ - PINGING Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:404133F9.81D8560E@***.net...
> http://www.rockcrawler.com/techrepor...ners/index.asp
> http://www.americanfastener.com/tech...ings_steel.asp
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
Hi Bill,
Can you tell me what the thread size is for the bolts on TJ bumpers? I
have located a local supplier/manufacturer of grade 8 bolts, but he needs
to know thread size, diameter and length for the bolts to ship them to me.
Also, does Jeep come with UNC or UNF standard bolts? This may sound
trivial to you, but I am still in the process of getting my hands on the
FSM for export models.
Thanks in advance. I have learned a lot from your posts.
Cheers
TW
news:404133F9.81D8560E@***.net...
> http://www.rockcrawler.com/techrepor...ners/index.asp
> http://www.americanfastener.com/tech...ings_steel.asp
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
Hi Bill,
Can you tell me what the thread size is for the bolts on TJ bumpers? I
have located a local supplier/manufacturer of grade 8 bolts, but he needs
to know thread size, diameter and length for the bolts to ship them to me.
Also, does Jeep come with UNC or UNF standard bolts? This may sound
trivial to you, but I am still in the process of getting my hands on the
FSM for export models.
Thanks in advance. I have learned a lot from your posts.
Cheers
TW
Guest
Posts: n/a
Re: Tow Hooks for 01 TJ - PINGING Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:404133F9.81D8560E@***.net...
> http://www.rockcrawler.com/techrepor...ners/index.asp
> http://www.americanfastener.com/tech...ings_steel.asp
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
Hi Bill,
Can you tell me what the thread size is for the bolts on TJ bumpers? I
have located a local supplier/manufacturer of grade 8 bolts, but he needs
to know thread size, diameter and length for the bolts to ship them to me.
Also, does Jeep come with UNC or UNF standard bolts? This may sound
trivial to you, but I am still in the process of getting my hands on the
FSM for export models.
Thanks in advance. I have learned a lot from your posts.
Cheers
TW
news:404133F9.81D8560E@***.net...
> http://www.rockcrawler.com/techrepor...ners/index.asp
> http://www.americanfastener.com/tech...ings_steel.asp
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
Hi Bill,
Can you tell me what the thread size is for the bolts on TJ bumpers? I
have located a local supplier/manufacturer of grade 8 bolts, but he needs
to know thread size, diameter and length for the bolts to ship them to me.
Also, does Jeep come with UNC or UNF standard bolts? This may sound
trivial to you, but I am still in the process of getting my hands on the
FSM for export models.
Thanks in advance. I have learned a lot from your posts.
Cheers
TW
Guest
Posts: n/a
Re: Tow Hooks for 01 TJ - PINGING Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:404133F9.81D8560E@***.net...
> http://www.rockcrawler.com/techrepor...ners/index.asp
> http://www.americanfastener.com/tech...ings_steel.asp
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
Hi Bill,
Can you tell me what the thread size is for the bolts on TJ bumpers? I
have located a local supplier/manufacturer of grade 8 bolts, but he needs
to know thread size, diameter and length for the bolts to ship them to me.
Also, does Jeep come with UNC or UNF standard bolts? This may sound
trivial to you, but I am still in the process of getting my hands on the
FSM for export models.
Thanks in advance. I have learned a lot from your posts.
Cheers
TW
news:404133F9.81D8560E@***.net...
> http://www.rockcrawler.com/techrepor...ners/index.asp
> http://www.americanfastener.com/tech...ings_steel.asp
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
Hi Bill,
Can you tell me what the thread size is for the bolts on TJ bumpers? I
have located a local supplier/manufacturer of grade 8 bolts, but he needs
to know thread size, diameter and length for the bolts to ship them to me.
Also, does Jeep come with UNC or UNF standard bolts? This may sound
trivial to you, but I am still in the process of getting my hands on the
FSM for export models.
Thanks in advance. I have learned a lot from your posts.
Cheers
TW
Guest
Posts: n/a
Re: Tow Hooks for 01 TJ - PINGING Bill
Sorry, I don't have access to a TJ for an exact size, for you.
Maybe you could measure them in inches or metric, whatever New Zealand
uses, and go to your local parts store for their recommendation, make
sure it's adequate comparing it to the chart at:
http://www.americanfastener.com/tech...ings_steel.asp Grade
eight bolts are usually fine thread rather than course.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
Maybe you could measure them in inches or metric, whatever New Zealand
uses, and go to your local parts store for their recommendation, make
sure it's adequate comparing it to the chart at:
http://www.americanfastener.com/tech...ings_steel.asp Grade
eight bolts are usually fine thread rather than course.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
Guest
Posts: n/a
Re: Tow Hooks for 01 TJ - PINGING Bill
Sorry, I don't have access to a TJ for an exact size, for you.
Maybe you could measure them in inches or metric, whatever New Zealand
uses, and go to your local parts store for their recommendation, make
sure it's adequate comparing it to the chart at:
http://www.americanfastener.com/tech...ings_steel.asp Grade
eight bolts are usually fine thread rather than course.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
Maybe you could measure them in inches or metric, whatever New Zealand
uses, and go to your local parts store for their recommendation, make
sure it's adequate comparing it to the chart at:
http://www.americanfastener.com/tech...ings_steel.asp Grade
eight bolts are usually fine thread rather than course.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
Guest
Posts: n/a
Re: Tow Hooks for 01 TJ - PINGING Bill
Sorry, I don't have access to a TJ for an exact size, for you.
Maybe you could measure them in inches or metric, whatever New Zealand
uses, and go to your local parts store for their recommendation, make
sure it's adequate comparing it to the chart at:
http://www.americanfastener.com/tech...ings_steel.asp Grade
eight bolts are usually fine thread rather than course.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
Maybe you could measure them in inches or metric, whatever New Zealand
uses, and go to your local parts store for their recommendation, make
sure it's adequate comparing it to the chart at:
http://www.americanfastener.com/tech...ings_steel.asp Grade
eight bolts are usually fine thread rather than course.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
Guest
Posts: n/a
Re: Tow Hooks for 01 TJ - PINGING Bill
I used euro grade 12.9 which is slightly stronger than Grade 8, but the
nearest equivalent.
Can't remember what the dimensions were - the easiest thing is to pull one
of them and
take it to the shop for comparison.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c21of9$4uk$1@news.wave.co.nz...
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:404133F9.81D8560E@***.net...
> > http://www.rockcrawler.com/techrepor...ners/index.asp
> > http://www.americanfastener.com/tech...ings_steel.asp
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
>
>
>
nearest equivalent.
Can't remember what the dimensions were - the easiest thing is to pull one
of them and
take it to the shop for comparison.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c21of9$4uk$1@news.wave.co.nz...
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:404133F9.81D8560E@***.net...
> > http://www.rockcrawler.com/techrepor...ners/index.asp
> > http://www.americanfastener.com/tech...ings_steel.asp
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
>
>
>
Guest
Posts: n/a
Re: Tow Hooks for 01 TJ - PINGING Bill
I used euro grade 12.9 which is slightly stronger than Grade 8, but the
nearest equivalent.
Can't remember what the dimensions were - the easiest thing is to pull one
of them and
take it to the shop for comparison.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c21of9$4uk$1@news.wave.co.nz...
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:404133F9.81D8560E@***.net...
> > http://www.rockcrawler.com/techrepor...ners/index.asp
> > http://www.americanfastener.com/tech...ings_steel.asp
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
>
>
>
nearest equivalent.
Can't remember what the dimensions were - the easiest thing is to pull one
of them and
take it to the shop for comparison.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c21of9$4uk$1@news.wave.co.nz...
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:404133F9.81D8560E@***.net...
> > http://www.rockcrawler.com/techrepor...ners/index.asp
> > http://www.americanfastener.com/tech...ings_steel.asp
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
>
>
>
Guest
Posts: n/a
Re: Tow Hooks for 01 TJ - PINGING Bill
I used euro grade 12.9 which is slightly stronger than Grade 8, but the
nearest equivalent.
Can't remember what the dimensions were - the easiest thing is to pull one
of them and
take it to the shop for comparison.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c21of9$4uk$1@news.wave.co.nz...
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:404133F9.81D8560E@***.net...
> > http://www.rockcrawler.com/techrepor...ners/index.asp
> > http://www.americanfastener.com/tech...ings_steel.asp
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
>
>
>
nearest equivalent.
Can't remember what the dimensions were - the easiest thing is to pull one
of them and
take it to the shop for comparison.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c21of9$4uk$1@news.wave.co.nz...
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:404133F9.81D8560E@***.net...
> > http://www.rockcrawler.com/techrepor...ners/index.asp
> > http://www.americanfastener.com/tech...ings_steel.asp
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Hi Bill,
>
> Can you tell me what the thread size is for the bolts on TJ bumpers? I
> have located a local supplier/manufacturer of grade 8 bolts, but he needs
> to know thread size, diameter and length for the bolts to ship them to me.
> Also, does Jeep come with UNC or UNF standard bolts? This may sound
> trivial to you, but I am still in the process of getting my hands on the
> FSM for export models.
>
> Thanks in advance. I have learned a lot from your posts.
>
> Cheers
> TW
>
>
>
