TJ Door Handle
03-03-2004, 07:40 PM
#11
Guest
Posts: n/a
Re: TJ Door Handle
Hi Andrew,
Do you mean the widow crank? Which has clip similar to the one in
this tool: http://www.----------.com/handtool.jpg Usually there enough
room to fish with a small screwdriver, using your thumb to push the
panel back. the correct tool for it would look like the one #1 at:
http://www.----------.com/XJPanel.pdf If you mean the release handle, it
looks like a screw will get out where you can play with, probably an
over center clip, that's just pop off like it did for Carl.
God Bless America, ßill O|||||||O
mailto:--------------------
reply@grouponly.com wrote:
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
>
> Andrew
Do you mean the widow crank? Which has clip similar to the one in
this tool: http://www.----------.com/handtool.jpg Usually there enough
room to fish with a small screwdriver, using your thumb to push the
panel back. the correct tool for it would look like the one #1 at:
http://www.----------.com/XJPanel.pdf If you mean the release handle, it
looks like a screw will get out where you can play with, probably an
over center clip, that's just pop off like it did for Carl.
God Bless America, ßill O|||||||O
mailto:--------------------
reply@grouponly.com wrote:
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
>
> Andrew
03-03-2004, 07:40 PM
#12
Guest
Posts: n/a
Re: TJ Door Handle
Hi Andrew,
Do you mean the widow crank? Which has clip similar to the one in
this tool: http://www.----------.com/handtool.jpg Usually there enough
room to fish with a small screwdriver, using your thumb to push the
panel back. the correct tool for it would look like the one #1 at:
http://www.----------.com/XJPanel.pdf If you mean the release handle, it
looks like a screw will get out where you can play with, probably an
over center clip, that's just pop off like it did for Carl.
God Bless America, ßill O|||||||O
mailto:--------------------
reply@grouponly.com wrote:
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
>
> Andrew
Do you mean the widow crank? Which has clip similar to the one in
this tool: http://www.----------.com/handtool.jpg Usually there enough
room to fish with a small screwdriver, using your thumb to push the
panel back. the correct tool for it would look like the one #1 at:
http://www.----------.com/XJPanel.pdf If you mean the release handle, it
looks like a screw will get out where you can play with, probably an
over center clip, that's just pop off like it did for Carl.
God Bless America, ßill O|||||||O
mailto:--------------------
reply@grouponly.com wrote:
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
>
> Andrew
03-03-2004, 07:40 PM
#13
Guest
Posts: n/a
Re: TJ Door Handle
Hi Andrew,
Do you mean the widow crank? Which has clip similar to the one in
this tool: http://www.----------.com/handtool.jpg Usually there enough
room to fish with a small screwdriver, using your thumb to push the
panel back. the correct tool for it would look like the one #1 at:
http://www.----------.com/XJPanel.pdf If you mean the release handle, it
looks like a screw will get out where you can play with, probably an
over center clip, that's just pop off like it did for Carl.
God Bless America, ßill O|||||||O
mailto:--------------------
reply@grouponly.com wrote:
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
>
> Andrew
Do you mean the widow crank? Which has clip similar to the one in
this tool: http://www.----------.com/handtool.jpg Usually there enough
room to fish with a small screwdriver, using your thumb to push the
panel back. the correct tool for it would look like the one #1 at:
http://www.----------.com/XJPanel.pdf If you mean the release handle, it
looks like a screw will get out where you can play with, probably an
over center clip, that's just pop off like it did for Carl.
God Bless America, ßill O|||||||O
mailto:--------------------
reply@grouponly.com wrote:
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
>
> Andrew
03-03-2004, 07:42 PM
#14
Guest
Posts: n/a
Re: TJ Door Handle
reply@grouponly.com did pass the time by typing:
> On 3 Mar 2004 11:49:08 -0800, cgraham@myshorelink.com (Carl Graham)
> wrote:
>
>> Thanks for the picture Bill, but I have the half doors (no windows).
>> Is there a picture for the half door panel? Hopefully I won't need a
>> special tool to get the panel off.
>> Carl
>
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
http://www.bobstools.com/Store/LS18600.html
Autozone, Napa, Pepboys, Canadian Tire, Sears, ..etc..
Sometimes you can get it with a flat metal ruler.
--
DougW
> On 3 Mar 2004 11:49:08 -0800, cgraham@myshorelink.com (Carl Graham)
> wrote:
>
>> Thanks for the picture Bill, but I have the half doors (no windows).
>> Is there a picture for the half door panel? Hopefully I won't need a
>> special tool to get the panel off.
>> Carl
>
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
http://www.bobstools.com/Store/LS18600.html
Autozone, Napa, Pepboys, Canadian Tire, Sears, ..etc..
Sometimes you can get it with a flat metal ruler.
--
DougW
03-03-2004, 07:42 PM
#15
Guest
Posts: n/a
Re: TJ Door Handle
reply@grouponly.com did pass the time by typing:
> On 3 Mar 2004 11:49:08 -0800, cgraham@myshorelink.com (Carl Graham)
> wrote:
>
>> Thanks for the picture Bill, but I have the half doors (no windows).
>> Is there a picture for the half door panel? Hopefully I won't need a
>> special tool to get the panel off.
>> Carl
>
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
http://www.bobstools.com/Store/LS18600.html
Autozone, Napa, Pepboys, Canadian Tire, Sears, ..etc..
Sometimes you can get it with a flat metal ruler.
--
DougW
> On 3 Mar 2004 11:49:08 -0800, cgraham@myshorelink.com (Carl Graham)
> wrote:
>
>> Thanks for the picture Bill, but I have the half doors (no windows).
>> Is there a picture for the half door panel? Hopefully I won't need a
>> special tool to get the panel off.
>> Carl
>
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
http://www.bobstools.com/Store/LS18600.html
Autozone, Napa, Pepboys, Canadian Tire, Sears, ..etc..
Sometimes you can get it with a flat metal ruler.
--
DougW
03-03-2004, 07:42 PM
#16
Guest
Posts: n/a
Re: TJ Door Handle
reply@grouponly.com did pass the time by typing:
> On 3 Mar 2004 11:49:08 -0800, cgraham@myshorelink.com (Carl Graham)
> wrote:
>
>> Thanks for the picture Bill, but I have the half doors (no windows).
>> Is there a picture for the half door panel? Hopefully I won't need a
>> special tool to get the panel off.
>> Carl
>
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
http://www.bobstools.com/Store/LS18600.html
Autozone, Napa, Pepboys, Canadian Tire, Sears, ..etc..
Sometimes you can get it with a flat metal ruler.
--
DougW
> On 3 Mar 2004 11:49:08 -0800, cgraham@myshorelink.com (Carl Graham)
> wrote:
>
>> Thanks for the picture Bill, but I have the half doors (no windows).
>> Is there a picture for the half door panel? Hopefully I won't need a
>> special tool to get the panel off.
>> Carl
>
>
> How do you get that clip on the handle off ?
> And will any Jeep Parts desk know what I
> mean when I ask for a "Special Tool C-4829" ?
http://www.bobstools.com/Store/LS18600.html
Autozone, Napa, Pepboys, Canadian Tire, Sears, ..etc..
Sometimes you can get it with a flat metal ruler.
--
DougW
03-03-2004, 09:18 PM
#17
Guest
Posts: n/a
Re: TJ Door Handle
On Wed, 03 Mar 2004 16:40:34 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
>Hi Andrew,
> Do you mean the widow crank? Which has clip similar to the one in
>this tool: http://www.----------.com/handtool.jpg Usually there enough
>room to fish with a small screwdriver, using your thumb to push the
>panel back. the correct tool for it would look like the one #1 at:
>http://www.----------.com/XJPanel.pdf If you mean the release handle, it
>looks like a screw will get out where you can play with, probably an
>over center clip, that's just pop off like it did for Carl.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
Nice web-page except for the ratio of grandkid
photos(4million bazillion) to Jeep photos( 1 only) needs
adjustment.
Thx!
Andrew
<----------@***.net> wrote:
>Hi Andrew,
> Do you mean the widow crank? Which has clip similar to the one in
>this tool: http://www.----------.com/handtool.jpg Usually there enough
>room to fish with a small screwdriver, using your thumb to push the
>panel back. the correct tool for it would look like the one #1 at:
>http://www.----------.com/XJPanel.pdf If you mean the release handle, it
>looks like a screw will get out where you can play with, probably an
>over center clip, that's just pop off like it did for Carl.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
Nice web-page except for the ratio of grandkid
photos(4million bazillion) to Jeep photos( 1 only) needs
adjustment.
Thx!
Andrew
03-03-2004, 09:18 PM
#18
Guest
Posts: n/a
Re: TJ Door Handle
On Wed, 03 Mar 2004 16:40:34 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
>Hi Andrew,
> Do you mean the widow crank? Which has clip similar to the one in
>this tool: http://www.----------.com/handtool.jpg Usually there enough
>room to fish with a small screwdriver, using your thumb to push the
>panel back. the correct tool for it would look like the one #1 at:
>http://www.----------.com/XJPanel.pdf If you mean the release handle, it
>looks like a screw will get out where you can play with, probably an
>over center clip, that's just pop off like it did for Carl.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
Nice web-page except for the ratio of grandkid
photos(4million bazillion) to Jeep photos( 1 only) needs
adjustment.
Thx!
Andrew
<----------@***.net> wrote:
>Hi Andrew,
> Do you mean the widow crank? Which has clip similar to the one in
>this tool: http://www.----------.com/handtool.jpg Usually there enough
>room to fish with a small screwdriver, using your thumb to push the
>panel back. the correct tool for it would look like the one #1 at:
>http://www.----------.com/XJPanel.pdf If you mean the release handle, it
>looks like a screw will get out where you can play with, probably an
>over center clip, that's just pop off like it did for Carl.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
Nice web-page except for the ratio of grandkid
photos(4million bazillion) to Jeep photos( 1 only) needs
adjustment.
Thx!
Andrew
03-03-2004, 09:18 PM
#19
Guest
Posts: n/a
Re: TJ Door Handle
On Wed, 03 Mar 2004 16:40:34 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
>Hi Andrew,
> Do you mean the widow crank? Which has clip similar to the one in
>this tool: http://www.----------.com/handtool.jpg Usually there enough
>room to fish with a small screwdriver, using your thumb to push the
>panel back. the correct tool for it would look like the one #1 at:
>http://www.----------.com/XJPanel.pdf If you mean the release handle, it
>looks like a screw will get out where you can play with, probably an
>over center clip, that's just pop off like it did for Carl.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
Nice web-page except for the ratio of grandkid
photos(4million bazillion) to Jeep photos( 1 only) needs
adjustment.
Thx!
Andrew
<----------@***.net> wrote:
>Hi Andrew,
> Do you mean the widow crank? Which has clip similar to the one in
>this tool: http://www.----------.com/handtool.jpg Usually there enough
>room to fish with a small screwdriver, using your thumb to push the
>panel back. the correct tool for it would look like the one #1 at:
>http://www.----------.com/XJPanel.pdf If you mean the release handle, it
>looks like a screw will get out where you can play with, probably an
>over center clip, that's just pop off like it did for Carl.
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
Nice web-page except for the ratio of grandkid
photos(4million bazillion) to Jeep photos( 1 only) needs
adjustment.
Thx!
Andrew
03-04-2004, 01:16 PM
#20
Guest
Posts: n/a
Re: TJ Door Handle
Not resisting...
Bob Stools dot com.
What kind of poop is that?
Only kidding..............
Tomes
"DougW" <post.replies@invalid.address> wrote in message
news:OXu1c.25369$1k.3744@okepread01...
> reply@grouponly.com did pass the time by typing:
> > On 3 Mar 2004 11:49:08 -0800, cgraham@myshorelink.com (Carl Graham)
> > wrote:
> >
> >> Thanks for the picture Bill, but I have the half doors (no windows).
> >> Is there a picture for the half door panel? Hopefully I won't need a
> >> special tool to get the panel off.
> >> Carl
> >
> >
> > How do you get that clip on the handle off ?
> > And will any Jeep Parts desk know what I
> > mean when I ask for a "Special Tool C-4829" ?
>
> http://www.bobstools.com/Store/LS18600.html
>
> Autozone, Napa, Pepboys, Canadian Tire, Sears, ..etc..
>
> Sometimes you can get it with a flat metal ruler.
>
> --
> DougW
>
>
Bob Stools dot com.
What kind of poop is that?
Only kidding..............
Tomes
"DougW" <post.replies@invalid.address> wrote in message
news:OXu1c.25369$1k.3744@okepread01...
> reply@grouponly.com did pass the time by typing:
> > On 3 Mar 2004 11:49:08 -0800, cgraham@myshorelink.com (Carl Graham)
> > wrote:
> >
> >> Thanks for the picture Bill, but I have the half doors (no windows).
> >> Is there a picture for the half door panel? Hopefully I won't need a
> >> special tool to get the panel off.
> >> Carl
> >
> >
> > How do you get that clip on the handle off ?
> > And will any Jeep Parts desk know what I
> > mean when I ask for a "Special Tool C-4829" ?
>
> http://www.bobstools.com/Store/LS18600.html
>
> Autozone, Napa, Pepboys, Canadian Tire, Sears, ..etc..
>
> Sometimes you can get it with a flat metal ruler.
>
> --
> DougW
>
>
