TJ A/C Issues
06-19-2007, 09:22 PM
#54
Guest
Posts: n/a
Re: Re: Re: TJ A/C Issues
On Tue, 19 Jun 2007 17:02:17 -0500, Richard J Kinch
<kinch@truetex.com> wrote:
>Earle Horton writes:
>
>>> If you want to regenerate dessicant, you have to bake it. Room
>>> temperature vacuum is not enough.
>>
>> Bake it? Done this? Reliable?
>
>Standard procedure for silica gel or molecular sieve dessicants.
Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
dry it out if it is "wet"
-----------------
TheSnoMan.com
<kinch@truetex.com> wrote:
>Earle Horton writes:
>
>>> If you want to regenerate dessicant, you have to bake it. Room
>>> temperature vacuum is not enough.
>>
>> Bake it? Done this? Reliable?
>
>Standard procedure for silica gel or molecular sieve dessicants.
Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
dry it out if it is "wet"
-----------------
TheSnoMan.com
06-19-2007, 09:22 PM
#55
Guest
Posts: n/a
Re: Re: Re: TJ A/C Issues
On Tue, 19 Jun 2007 17:02:17 -0500, Richard J Kinch
<kinch@truetex.com> wrote:
>Earle Horton writes:
>
>>> If you want to regenerate dessicant, you have to bake it. Room
>>> temperature vacuum is not enough.
>>
>> Bake it? Done this? Reliable?
>
>Standard procedure for silica gel or molecular sieve dessicants.
Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
dry it out if it is "wet"
-----------------
TheSnoMan.com
<kinch@truetex.com> wrote:
>Earle Horton writes:
>
>>> If you want to regenerate dessicant, you have to bake it. Room
>>> temperature vacuum is not enough.
>>
>> Bake it? Done this? Reliable?
>
>Standard procedure for silica gel or molecular sieve dessicants.
Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
dry it out if it is "wet"
-----------------
TheSnoMan.com
06-19-2007, 09:22 PM
#56
Guest
Posts: n/a
Re: Re: Re: TJ A/C Issues
On Tue, 19 Jun 2007 17:02:17 -0500, Richard J Kinch
<kinch@truetex.com> wrote:
>Earle Horton writes:
>
>>> If you want to regenerate dessicant, you have to bake it. Room
>>> temperature vacuum is not enough.
>>
>> Bake it? Done this? Reliable?
>
>Standard procedure for silica gel or molecular sieve dessicants.
Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
dry it out if it is "wet"
-----------------
TheSnoMan.com
<kinch@truetex.com> wrote:
>Earle Horton writes:
>
>>> If you want to regenerate dessicant, you have to bake it. Room
>>> temperature vacuum is not enough.
>>
>> Bake it? Done this? Reliable?
>
>Standard procedure for silica gel or molecular sieve dessicants.
Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
dry it out if it is "wet"
-----------------
TheSnoMan.com
06-19-2007, 09:22 PM
#57
Guest
Posts: n/a
Re: Re: Re: TJ A/C Issues
On Tue, 19 Jun 2007 17:02:17 -0500, Richard J Kinch
<kinch@truetex.com> wrote:
>Earle Horton writes:
>
>>> If you want to regenerate dessicant, you have to bake it. Room
>>> temperature vacuum is not enough.
>>
>> Bake it? Done this? Reliable?
>
>Standard procedure for silica gel or molecular sieve dessicants.
Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
dry it out if it is "wet"
-----------------
TheSnoMan.com
<kinch@truetex.com> wrote:
>Earle Horton writes:
>
>>> If you want to regenerate dessicant, you have to bake it. Room
>>> temperature vacuum is not enough.
>>
>> Bake it? Done this? Reliable?
>
>Standard procedure for silica gel or molecular sieve dessicants.
Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
dry it out if it is "wet"
-----------------
TheSnoMan.com
06-19-2007, 10:56 PM
#58
Guest
Posts: n/a
Re: Re: Re: TJ A/C Issues
SnoMan writes:
> Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
> dry it out if it is "wet"
And note that the stuff will be covered in PAG or POE lubricant, which will
present a barrier to outgassing the water.
> Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
> dry it out if it is "wet"
And note that the stuff will be covered in PAG or POE lubricant, which will
present a barrier to outgassing the water.
06-19-2007, 10:56 PM
#59
Guest
Posts: n/a
Re: Re: Re: TJ A/C Issues
SnoMan writes:
> Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
> dry it out if it is "wet"
And note that the stuff will be covered in PAG or POE lubricant, which will
present a barrier to outgassing the water.
> Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
> dry it out if it is "wet"
And note that the stuff will be covered in PAG or POE lubricant, which will
present a barrier to outgassing the water.
06-19-2007, 10:56 PM
#60
Guest
Posts: n/a
Re: Re: Re: TJ A/C Issues
SnoMan writes:
> Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
> dry it out if it is "wet"
And note that the stuff will be covered in PAG or POE lubricant, which will
present a barrier to outgassing the water.
> Usually it is for about 8 to 16 hours at 250 degrees to reactivate or
> dry it out if it is "wet"
And note that the stuff will be covered in PAG or POE lubricant, which will
present a barrier to outgassing the water.