Titanium Brush Guard?
08-20-2004, 09:41 AM
#2
Guest
Posts: n/a
Re: Titanium Brush Guard?
Its a lot lighter. I don't know if it stronger.
What is the cost?
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:ZTmVc.160553$J06.3530@pd7tw2no...
> Is a titanium brush guard as good/better than stainless steel? It's
> powder-coated, if that makes any difference. The guy here says it's
stronger
> but will it last as long? Will it lose it's appearance, etc?
>
> Thanks!
>
>
What is the cost?
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:ZTmVc.160553$J06.3530@pd7tw2no...
> Is a titanium brush guard as good/better than stainless steel? It's
> powder-coated, if that makes any difference. The guy here says it's
stronger
> but will it last as long? Will it lose it's appearance, etc?
>
> Thanks!
>
>
08-20-2004, 09:41 AM
#3
Guest
Posts: n/a
Re: Titanium Brush Guard?
Its a lot lighter. I don't know if it stronger.
What is the cost?
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:ZTmVc.160553$J06.3530@pd7tw2no...
> Is a titanium brush guard as good/better than stainless steel? It's
> powder-coated, if that makes any difference. The guy here says it's
stronger
> but will it last as long? Will it lose it's appearance, etc?
>
> Thanks!
>
>
What is the cost?
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:ZTmVc.160553$J06.3530@pd7tw2no...
> Is a titanium brush guard as good/better than stainless steel? It's
> powder-coated, if that makes any difference. The guy here says it's
stronger
> but will it last as long? Will it lose it's appearance, etc?
>
> Thanks!
>
>
08-20-2004, 09:41 AM
#4
Guest
Posts: n/a
Re: Titanium Brush Guard?
Its a lot lighter. I don't know if it stronger.
What is the cost?
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:ZTmVc.160553$J06.3530@pd7tw2no...
> Is a titanium brush guard as good/better than stainless steel? It's
> powder-coated, if that makes any difference. The guy here says it's
stronger
> but will it last as long? Will it lose it's appearance, etc?
>
> Thanks!
>
>
What is the cost?
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:ZTmVc.160553$J06.3530@pd7tw2no...
> Is a titanium brush guard as good/better than stainless steel? It's
> powder-coated, if that makes any difference. The guy here says it's
stronger
> but will it last as long? Will it lose it's appearance, etc?
>
> Thanks!
>
>
08-20-2004, 09:41 AM
#5
Guest
Posts: n/a
Re: Titanium Brush Guard?
Its a lot lighter. I don't know if it stronger.
What is the cost?
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:ZTmVc.160553$J06.3530@pd7tw2no...
> Is a titanium brush guard as good/better than stainless steel? It's
> powder-coated, if that makes any difference. The guy here says it's
stronger
> but will it last as long? Will it lose it's appearance, etc?
>
> Thanks!
>
>
What is the cost?
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:ZTmVc.160553$J06.3530@pd7tw2no...
> Is a titanium brush guard as good/better than stainless steel? It's
> powder-coated, if that makes any difference. The guy here says it's
stronger
> but will it last as long? Will it lose it's appearance, etc?
>
> Thanks!
>
>
08-20-2004, 02:27 PM
#6
Guest
Posts: n/a
Re: Titanium Brush Guard?
About $250 CDN new here. The Stainless Steel ones are like $400. I can't
figure it out ...
"Ken" <boxercrazy@nventure.com> wrote in message
news:10ibvrnmccno16f@corp.supernews.com...
> Its a lot lighter. I don't know if it stronger.
>
> What is the cost?
>
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:ZTmVc.160553$J06.3530@pd7tw2no...
> > Is a titanium brush guard as good/better than stainless steel? It's
> > powder-coated, if that makes any difference. The guy here says it's
> stronger
> > but will it last as long? Will it lose it's appearance, etc?
> >
> > Thanks!
> >
> >
>
>
figure it out ...
"Ken" <boxercrazy@nventure.com> wrote in message
news:10ibvrnmccno16f@corp.supernews.com...
> Its a lot lighter. I don't know if it stronger.
>
> What is the cost?
>
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:ZTmVc.160553$J06.3530@pd7tw2no...
> > Is a titanium brush guard as good/better than stainless steel? It's
> > powder-coated, if that makes any difference. The guy here says it's
> stronger
> > but will it last as long? Will it lose it's appearance, etc?
> >
> > Thanks!
> >
> >
>
>
08-20-2004, 02:27 PM
#7
Guest
Posts: n/a
Re: Titanium Brush Guard?
About $250 CDN new here. The Stainless Steel ones are like $400. I can't
figure it out ...
"Ken" <boxercrazy@nventure.com> wrote in message
news:10ibvrnmccno16f@corp.supernews.com...
> Its a lot lighter. I don't know if it stronger.
>
> What is the cost?
>
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:ZTmVc.160553$J06.3530@pd7tw2no...
> > Is a titanium brush guard as good/better than stainless steel? It's
> > powder-coated, if that makes any difference. The guy here says it's
> stronger
> > but will it last as long? Will it lose it's appearance, etc?
> >
> > Thanks!
> >
> >
>
>
figure it out ...
"Ken" <boxercrazy@nventure.com> wrote in message
news:10ibvrnmccno16f@corp.supernews.com...
> Its a lot lighter. I don't know if it stronger.
>
> What is the cost?
>
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:ZTmVc.160553$J06.3530@pd7tw2no...
> > Is a titanium brush guard as good/better than stainless steel? It's
> > powder-coated, if that makes any difference. The guy here says it's
> stronger
> > but will it last as long? Will it lose it's appearance, etc?
> >
> > Thanks!
> >
> >
>
>
08-20-2004, 02:27 PM
#8
Guest
Posts: n/a
Re: Titanium Brush Guard?
About $250 CDN new here. The Stainless Steel ones are like $400. I can't
figure it out ...
"Ken" <boxercrazy@nventure.com> wrote in message
news:10ibvrnmccno16f@corp.supernews.com...
> Its a lot lighter. I don't know if it stronger.
>
> What is the cost?
>
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:ZTmVc.160553$J06.3530@pd7tw2no...
> > Is a titanium brush guard as good/better than stainless steel? It's
> > powder-coated, if that makes any difference. The guy here says it's
> stronger
> > but will it last as long? Will it lose it's appearance, etc?
> >
> > Thanks!
> >
> >
>
>
figure it out ...
"Ken" <boxercrazy@nventure.com> wrote in message
news:10ibvrnmccno16f@corp.supernews.com...
> Its a lot lighter. I don't know if it stronger.
>
> What is the cost?
>
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:ZTmVc.160553$J06.3530@pd7tw2no...
> > Is a titanium brush guard as good/better than stainless steel? It's
> > powder-coated, if that makes any difference. The guy here says it's
> stronger
> > but will it last as long? Will it lose it's appearance, etc?
> >
> > Thanks!
> >
> >
>
>
08-20-2004, 02:27 PM
#9
Guest
Posts: n/a
Re: Titanium Brush Guard?
About $250 CDN new here. The Stainless Steel ones are like $400. I can't
figure it out ...
"Ken" <boxercrazy@nventure.com> wrote in message
news:10ibvrnmccno16f@corp.supernews.com...
> Its a lot lighter. I don't know if it stronger.
>
> What is the cost?
>
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:ZTmVc.160553$J06.3530@pd7tw2no...
> > Is a titanium brush guard as good/better than stainless steel? It's
> > powder-coated, if that makes any difference. The guy here says it's
> stronger
> > but will it last as long? Will it lose it's appearance, etc?
> >
> > Thanks!
> >
> >
>
>
figure it out ...
"Ken" <boxercrazy@nventure.com> wrote in message
news:10ibvrnmccno16f@corp.supernews.com...
> Its a lot lighter. I don't know if it stronger.
>
> What is the cost?
>
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:ZTmVc.160553$J06.3530@pd7tw2no...
> > Is a titanium brush guard as good/better than stainless steel? It's
> > powder-coated, if that makes any difference. The guy here says it's
> stronger
> > but will it last as long? Will it lose it's appearance, etc?
> >
> > Thanks!
> >
> >
>
>
08-20-2004, 04:07 PM
#10
Guest
Posts: n/a
Re: Titanium Brush Guard?
Make sure you aren't buying a steel brush guard that is powdercoated with a
titanium colored powder. This is a pretty common way to make brush guards.
I'm not sure if I've ever seen one actually made out of titanium, and it
would no doubt cost much more than the stainless one. Titanium tubing is
very expensive and quite difficult to weld.
Chris
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:horVc.155253$M95.130262@pd7tw1no...
> About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> figure it out ...
>
> "Ken" <boxercrazy@nventure.com> wrote in message
> news:10ibvrnmccno16f@corp.supernews.com...
> > Its a lot lighter. I don't know if it stronger.
> >
> > What is the cost?
> >
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > Is a titanium brush guard as good/better than stainless steel? It's
> > > powder-coated, if that makes any difference. The guy here says it's
> > stronger
> > > but will it last as long? Will it lose it's appearance, etc?
> > >
> > > Thanks!
> > >
> > >
> >
> >
>
>
titanium colored powder. This is a pretty common way to make brush guards.
I'm not sure if I've ever seen one actually made out of titanium, and it
would no doubt cost much more than the stainless one. Titanium tubing is
very expensive and quite difficult to weld.
Chris
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:horVc.155253$M95.130262@pd7tw1no...
> About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> figure it out ...
>
> "Ken" <boxercrazy@nventure.com> wrote in message
> news:10ibvrnmccno16f@corp.supernews.com...
> > Its a lot lighter. I don't know if it stronger.
> >
> > What is the cost?
> >
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > Is a titanium brush guard as good/better than stainless steel? It's
> > > powder-coated, if that makes any difference. The guy here says it's
> > stronger
> > > but will it last as long? Will it lose it's appearance, etc?
> > >
> > > Thanks!
> > >
> > >
> >
> >
>
>
