Titanium is none magnetic. If a magnet sticks it's steel, if it doesn't it
could be stainless(real heavy) or titanium(much lighter).
Tqm

"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:PmGVc.4220$IG.50684995@news-text.cableinet.net...
> Titanium melts at 1668 and medium carbon Steel around 1482 deg C.
>
> --
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41266C41.F79319E9@***.net...
> > A friend was going to pull wheels on a military box made of
> > titanium, so his Daughter could use it collecting horse muck, and asked
> > me to cut the end out out of it to make it easier to dump. I couldn't
> > get my Oxy-Acetylene to cut.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > c wrote:
> > >
> > > Make sure you aren't buying a steel brush guard that is powdercoated
> with a
> > > titanium colored powder. This is a pretty common way to make brush
> guards.
> > > I'm not sure if I've ever seen one actually made out of titanium, and
it
> > > would no doubt cost much more than the stainless one. Titanium tubing
is
> > > very expensive and quite difficult to weld.
> > >
> > > Chris
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:horVc.155253$M95.130262@pd7tw1no...
> > > > About $250 CDN new here. The Stainless Steel ones are like $400. I
> can't
> > > > figure it out ...
> > > >
> > > > "Ken" <boxercrazy@nventure.com> wrote in message
> > > > news:10ibvrnmccno16f@corp.supernews.com...
> > > > > Its a lot lighter. I don't know if it stronger.
> > > > >
> > > > > What is the cost?
> > > > >
> > > > >
> > > > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > > > Is a titanium brush guard as good/better than stainless steel?
> It's
> > > > > > powder-coated, if that makes any difference. The guy here says
> it's
> > > > > stronger
> > > > > > but will it last as long? Will it lose it's appearance, etc?
> > > > > >
> > > > > > Thanks!
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
>
>

 

Titanium is none magnetic. If a magnet sticks it's steel, if it doesn't it
could be stainless(real heavy) or titanium(much lighter).
Tqm

"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:PmGVc.4220$IG.50684995@news-text.cableinet.net...
> Titanium melts at 1668 and medium carbon Steel around 1482 deg C.
>
> --
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41266C41.F79319E9@***.net...
> > A friend was going to pull wheels on a military box made of
> > titanium, so his Daughter could use it collecting horse muck, and asked
> > me to cut the end out out of it to make it easier to dump. I couldn't
> > get my Oxy-Acetylene to cut.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > c wrote:
> > >
> > > Make sure you aren't buying a steel brush guard that is powdercoated
> with a
> > > titanium colored powder. This is a pretty common way to make brush
> guards.
> > > I'm not sure if I've ever seen one actually made out of titanium, and
it
> > > would no doubt cost much more than the stainless one. Titanium tubing
is
> > > very expensive and quite difficult to weld.
> > >
> > > Chris
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:horVc.155253$M95.130262@pd7tw1no...
> > > > About $250 CDN new here. The Stainless Steel ones are like $400. I
> can't
> > > > figure it out ...
> > > >
> > > > "Ken" <boxercrazy@nventure.com> wrote in message
> > > > news:10ibvrnmccno16f@corp.supernews.com...
> > > > > Its a lot lighter. I don't know if it stronger.
> > > > >
> > > > > What is the cost?
> > > > >
> > > > >
> > > > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > > > Is a titanium brush guard as good/better than stainless steel?
> It's
> > > > > > powder-coated, if that makes any difference. The guy here says
> it's
> > > > > stronger
> > > > > > but will it last as long? Will it lose it's appearance, etc?
> > > > > >
> > > > > > Thanks!
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
>
>

 

Titanium is none magnetic. If a magnet sticks it's steel, if it doesn't it
could be stainless(real heavy) or titanium(much lighter).
Tqm

"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:PmGVc.4220$IG.50684995@news-text.cableinet.net...
> Titanium melts at 1668 and medium carbon Steel around 1482 deg C.
>
> --
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41266C41.F79319E9@***.net...
> > A friend was going to pull wheels on a military box made of
> > titanium, so his Daughter could use it collecting horse muck, and asked
> > me to cut the end out out of it to make it easier to dump. I couldn't
> > get my Oxy-Acetylene to cut.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > c wrote:
> > >
> > > Make sure you aren't buying a steel brush guard that is powdercoated
> with a
> > > titanium colored powder. This is a pretty common way to make brush
> guards.
> > > I'm not sure if I've ever seen one actually made out of titanium, and
it
> > > would no doubt cost much more than the stainless one. Titanium tubing
is
> > > very expensive and quite difficult to weld.
> > >
> > > Chris
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:horVc.155253$M95.130262@pd7tw1no...
> > > > About $250 CDN new here. The Stainless Steel ones are like $400. I
> can't
> > > > figure it out ...
> > > >
> > > > "Ken" <boxercrazy@nventure.com> wrote in message
> > > > news:10ibvrnmccno16f@corp.supernews.com...
> > > > > Its a lot lighter. I don't know if it stronger.
> > > > >
> > > > > What is the cost?
> > > > >
> > > > >
> > > > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > > > Is a titanium brush guard as good/better than stainless steel?
> It's
> > > > > > powder-coated, if that makes any difference. The guy here says
> it's
> > > > > stronger
> > > > > > but will it last as long? Will it lose it's appearance, etc?
> > > > > >
> > > > > > Thanks!
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
>
>