tire pressure for 31" MT/R's on factory rims?
09-22-2004, 08:49 AM
#2
Guest
Posts: n/a
Re: tire pressure for 31" MT/R's on factory rims?
What is the pressure now? Sounds to me like they may set the pressure on the
sidewall. I went from 30's to 31's an just set them at the factory
recommended pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
the
> tire shop set them at and seem a little high in eh center to me. I have
the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
sidewall. I went from 30's to 31's an just set them at the factory
recommended pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
the
> tire shop set them at and seem a little high in eh center to me. I have
the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
09-22-2004, 08:49 AM
#3
Guest
Posts: n/a
Re: tire pressure for 31" MT/R's on factory rims?
What is the pressure now? Sounds to me like they may set the pressure on the
sidewall. I went from 30's to 31's an just set them at the factory
recommended pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
the
> tire shop set them at and seem a little high in eh center to me. I have
the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
sidewall. I went from 30's to 31's an just set them at the factory
recommended pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
the
> tire shop set them at and seem a little high in eh center to me. I have
the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
09-22-2004, 08:49 AM
#4
Guest
Posts: n/a
Re: tire pressure for 31" MT/R's on factory rims?
What is the pressure now? Sounds to me like they may set the pressure on the
sidewall. I went from 30's to 31's an just set them at the factory
recommended pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
the
> tire shop set them at and seem a little high in eh center to me. I have
the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
sidewall. I went from 30's to 31's an just set them at the factory
recommended pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
the
> tire shop set them at and seem a little high in eh center to me. I have
the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
09-24-2004, 09:27 AM
#5
Guest
Posts: n/a
Re: tire pressure for 31" MT/R's on factory rims?
If you really want to dial it in draw a chalk mark across the tread and
drive in a straight line across a flat parking lot. Stop and look at the
chalk mark. Even wear = correct tire pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
> the
> tire shop set them at and seem a little high in eh center to me. I have
> the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
drive in a straight line across a flat parking lot. Stop and look at the
chalk mark. Even wear = correct tire pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
> the
> tire shop set them at and seem a little high in eh center to me. I have
> the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
09-24-2004, 09:27 AM
#6
Guest
Posts: n/a
Re: tire pressure for 31" MT/R's on factory rims?
If you really want to dial it in draw a chalk mark across the tread and
drive in a straight line across a flat parking lot. Stop and look at the
chalk mark. Even wear = correct tire pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
> the
> tire shop set them at and seem a little high in eh center to me. I have
> the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
drive in a straight line across a flat parking lot. Stop and look at the
chalk mark. Even wear = correct tire pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
> the
> tire shop set them at and seem a little high in eh center to me. I have
> the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
09-24-2004, 09:27 AM
#7
Guest
Posts: n/a
Re: tire pressure for 31" MT/R's on factory rims?
If you really want to dial it in draw a chalk mark across the tread and
drive in a straight line across a flat parking lot. Stop and look at the
chalk mark. Even wear = correct tire pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
> the
> tire shop set them at and seem a little high in eh center to me. I have
> the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
drive in a straight line across a flat parking lot. Stop and look at the
chalk mark. Even wear = correct tire pressure.
"Handywired" <handywired@aol.com> wrote in message
news:20040922043054.09431.00001133@mb-m05.aol.com...
> What should I run to get even wear? Anyone know? THey are at whatever
> the
> tire shop set them at and seem a little high in eh center to me. I have
> the
> narrower of the two stock TJ rims (7"?)...
>
> -jeff
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)