tire pressure for 31" MT/R's on factory rims?
What should I run to get even wear? Anyone know? THey are at whatever the
tire shop set them at and seem a little high in eh center to me. I have the narrower of the two stock TJ rims (7"?)... -jeff |
Re: tire pressure for 31" MT/R's on factory rims?
What is the pressure now? Sounds to me like they may set the pressure on the
sidewall. I went from 30's to 31's an just set them at the factory recommended pressure. "Handywired" <handywired@aol.com> wrote in message news:20040922043054.09431.00001133@mb-m05.aol.com... > What should I run to get even wear? Anyone know? THey are at whatever the > tire shop set them at and seem a little high in eh center to me. I have the > narrower of the two stock TJ rims (7"?)... > > -jeff |
Re: tire pressure for 31" MT/R's on factory rims?
What is the pressure now? Sounds to me like they may set the pressure on the
sidewall. I went from 30's to 31's an just set them at the factory recommended pressure. "Handywired" <handywired@aol.com> wrote in message news:20040922043054.09431.00001133@mb-m05.aol.com... > What should I run to get even wear? Anyone know? THey are at whatever the > tire shop set them at and seem a little high in eh center to me. I have the > narrower of the two stock TJ rims (7"?)... > > -jeff |
Re: tire pressure for 31" MT/R's on factory rims?
What is the pressure now? Sounds to me like they may set the pressure on the
sidewall. I went from 30's to 31's an just set them at the factory recommended pressure. "Handywired" <handywired@aol.com> wrote in message news:20040922043054.09431.00001133@mb-m05.aol.com... > What should I run to get even wear? Anyone know? THey are at whatever the > tire shop set them at and seem a little high in eh center to me. I have the > narrower of the two stock TJ rims (7"?)... > > -jeff |
Re: tire pressure for 31" MT/R's on factory rims?
If you really want to dial it in draw a chalk mark across the tread and
drive in a straight line across a flat parking lot. Stop and look at the chalk mark. Even wear = correct tire pressure. "Handywired" <handywired@aol.com> wrote in message news:20040922043054.09431.00001133@mb-m05.aol.com... > What should I run to get even wear? Anyone know? THey are at whatever > the > tire shop set them at and seem a little high in eh center to me. I have > the > narrower of the two stock TJ rims (7"?)... > > -jeff |
Re: tire pressure for 31" MT/R's on factory rims?
If you really want to dial it in draw a chalk mark across the tread and
drive in a straight line across a flat parking lot. Stop and look at the chalk mark. Even wear = correct tire pressure. "Handywired" <handywired@aol.com> wrote in message news:20040922043054.09431.00001133@mb-m05.aol.com... > What should I run to get even wear? Anyone know? THey are at whatever > the > tire shop set them at and seem a little high in eh center to me. I have > the > narrower of the two stock TJ rims (7"?)... > > -jeff |
Re: tire pressure for 31" MT/R's on factory rims?
If you really want to dial it in draw a chalk mark across the tread and
drive in a straight line across a flat parking lot. Stop and look at the chalk mark. Even wear = correct tire pressure. "Handywired" <handywired@aol.com> wrote in message news:20040922043054.09431.00001133@mb-m05.aol.com... > What should I run to get even wear? Anyone know? THey are at whatever > the > tire shop set them at and seem a little high in eh center to me. I have > the > narrower of the two stock TJ rims (7"?)... > > -jeff |
All times are GMT -4. The time now is 01:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands