TIG Welding on a TJ
#81
Guest
Posts: n/a
Re: TIG Welding on a TJ
Thanks for replies, I will bear them all in mind before I start.
It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle
Cheers
Nick
On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>
It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle
Cheers
Nick
On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>
#82
Guest
Posts: n/a
Re: TIG Welding on a TJ
Carl S wrote:
> I have a great idea. If I weld in the nude, I'll be less likely to
> catch on fire. I'm a genius! Who needs some welding done?! >BFG<
>
google "herculiner hootus" and wonder what a flying blob of molten
metal would do. :O
--
DougW
> I have a great idea. If I weld in the nude, I'll be less likely to
> catch on fire. I'm a genius! Who needs some welding done?! >BFG<
>
google "herculiner hootus" and wonder what a flying blob of molten
metal would do. :O
--
DougW
#83
Guest
Posts: n/a
Re: TIG Welding on a TJ
Carl S wrote:
> I have a great idea. If I weld in the nude, I'll be less likely to
> catch on fire. I'm a genius! Who needs some welding done?! >BFG<
>
google "herculiner hootus" and wonder what a flying blob of molten
metal would do. :O
--
DougW
> I have a great idea. If I weld in the nude, I'll be less likely to
> catch on fire. I'm a genius! Who needs some welding done?! >BFG<
>
google "herculiner hootus" and wonder what a flying blob of molten
metal would do. :O
--
DougW
#84
Guest
Posts: n/a
Re: TIG Welding on a TJ
Carl S wrote:
> I have a great idea. If I weld in the nude, I'll be less likely to
> catch on fire. I'm a genius! Who needs some welding done?! >BFG<
>
google "herculiner hootus" and wonder what a flying blob of molten
metal would do. :O
--
DougW
> I have a great idea. If I weld in the nude, I'll be less likely to
> catch on fire. I'm a genius! Who needs some welding done?! >BFG<
>
google "herculiner hootus" and wonder what a flying blob of molten
metal would do. :O
--
DougW
#85
Guest
Posts: n/a
Re: TIG Welding on a TJ
Carl S wrote:
> I have a great idea. If I weld in the nude, I'll be less likely to
> catch on fire. I'm a genius! Who needs some welding done?! >BFG<
>
google "herculiner hootus" and wonder what a flying blob of molten
metal would do. :O
--
DougW
> I have a great idea. If I weld in the nude, I'll be less likely to
> catch on fire. I'm a genius! Who needs some welding done?! >BFG<
>
google "herculiner hootus" and wonder what a flying blob of molten
metal would do. :O
--
DougW
#86
Guest
Posts: n/a
Re: TIG Welding on a TJ
It was me who asked about the year of the vehicle...
If it were me doing the welding, I would disconnect the battery,
protect area below with a welding blanket, and protect area above with
sheetmetal shields. With tig, its not like your throwing alot of slag
around. A shielding gas does wonders for keeping impurities out. Just
make sure your parts are cleaned up good.
djdave
On Mon, 29 Jan 2007 09:42:18 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Thanks for replies, I will bear them all in mind before I start.
>
>It's a 2002 TJ as I think someone asked what year and I am assuming
>that was referring to the vehicle
>
>Cheers
>Nick
>
>On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
><carlsaiyed@REMOVE.hotmail.com> wrote:
>
>>97-05 >BFG<
>>
>>Carl
>>
>>"djdave" <djdave@fake.com> wrote in message
>>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com. ..
>>> What Year?
>>>
>>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>>
>>>>Hi,
>>>> I was planning on moving the coil spring perch's on the Dana44
>>>>on the back of my TJ to bring them back level under normal
>>>>circumstances, due to a suspension lift then arm adjustments to
>>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>>Lift start as an initiation sequence. What safety precautions would
>>>>be recommended in relation to the electrics on the vehicle before
>>>>beginning to weld.
>>>>
>>>>Any information would be greatly appreciated.
>>>>
>>>>Cheers
>>>>Nick
>>>
>>
If it were me doing the welding, I would disconnect the battery,
protect area below with a welding blanket, and protect area above with
sheetmetal shields. With tig, its not like your throwing alot of slag
around. A shielding gas does wonders for keeping impurities out. Just
make sure your parts are cleaned up good.
djdave
On Mon, 29 Jan 2007 09:42:18 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Thanks for replies, I will bear them all in mind before I start.
>
>It's a 2002 TJ as I think someone asked what year and I am assuming
>that was referring to the vehicle
>
>Cheers
>Nick
>
>On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
><carlsaiyed@REMOVE.hotmail.com> wrote:
>
>>97-05 >BFG<
>>
>>Carl
>>
>>"djdave" <djdave@fake.com> wrote in message
>>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com. ..
>>> What Year?
>>>
>>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>>
>>>>Hi,
>>>> I was planning on moving the coil spring perch's on the Dana44
>>>>on the back of my TJ to bring them back level under normal
>>>>circumstances, due to a suspension lift then arm adjustments to
>>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>>Lift start as an initiation sequence. What safety precautions would
>>>>be recommended in relation to the electrics on the vehicle before
>>>>beginning to weld.
>>>>
>>>>Any information would be greatly appreciated.
>>>>
>>>>Cheers
>>>>Nick
>>>
>>
#87
Guest
Posts: n/a
Re: TIG Welding on a TJ
It was me who asked about the year of the vehicle...
If it were me doing the welding, I would disconnect the battery,
protect area below with a welding blanket, and protect area above with
sheetmetal shields. With tig, its not like your throwing alot of slag
around. A shielding gas does wonders for keeping impurities out. Just
make sure your parts are cleaned up good.
djdave
On Mon, 29 Jan 2007 09:42:18 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Thanks for replies, I will bear them all in mind before I start.
>
>It's a 2002 TJ as I think someone asked what year and I am assuming
>that was referring to the vehicle
>
>Cheers
>Nick
>
>On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
><carlsaiyed@REMOVE.hotmail.com> wrote:
>
>>97-05 >BFG<
>>
>>Carl
>>
>>"djdave" <djdave@fake.com> wrote in message
>>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com. ..
>>> What Year?
>>>
>>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>>
>>>>Hi,
>>>> I was planning on moving the coil spring perch's on the Dana44
>>>>on the back of my TJ to bring them back level under normal
>>>>circumstances, due to a suspension lift then arm adjustments to
>>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>>Lift start as an initiation sequence. What safety precautions would
>>>>be recommended in relation to the electrics on the vehicle before
>>>>beginning to weld.
>>>>
>>>>Any information would be greatly appreciated.
>>>>
>>>>Cheers
>>>>Nick
>>>
>>
If it were me doing the welding, I would disconnect the battery,
protect area below with a welding blanket, and protect area above with
sheetmetal shields. With tig, its not like your throwing alot of slag
around. A shielding gas does wonders for keeping impurities out. Just
make sure your parts are cleaned up good.
djdave
On Mon, 29 Jan 2007 09:42:18 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Thanks for replies, I will bear them all in mind before I start.
>
>It's a 2002 TJ as I think someone asked what year and I am assuming
>that was referring to the vehicle
>
>Cheers
>Nick
>
>On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
><carlsaiyed@REMOVE.hotmail.com> wrote:
>
>>97-05 >BFG<
>>
>>Carl
>>
>>"djdave" <djdave@fake.com> wrote in message
>>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com. ..
>>> What Year?
>>>
>>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>>
>>>>Hi,
>>>> I was planning on moving the coil spring perch's on the Dana44
>>>>on the back of my TJ to bring them back level under normal
>>>>circumstances, due to a suspension lift then arm adjustments to
>>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>>Lift start as an initiation sequence. What safety precautions would
>>>>be recommended in relation to the electrics on the vehicle before
>>>>beginning to weld.
>>>>
>>>>Any information would be greatly appreciated.
>>>>
>>>>Cheers
>>>>Nick
>>>
>>
#88
Guest
Posts: n/a
Re: TIG Welding on a TJ
It was me who asked about the year of the vehicle...
If it were me doing the welding, I would disconnect the battery,
protect area below with a welding blanket, and protect area above with
sheetmetal shields. With tig, its not like your throwing alot of slag
around. A shielding gas does wonders for keeping impurities out. Just
make sure your parts are cleaned up good.
djdave
On Mon, 29 Jan 2007 09:42:18 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Thanks for replies, I will bear them all in mind before I start.
>
>It's a 2002 TJ as I think someone asked what year and I am assuming
>that was referring to the vehicle
>
>Cheers
>Nick
>
>On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
><carlsaiyed@REMOVE.hotmail.com> wrote:
>
>>97-05 >BFG<
>>
>>Carl
>>
>>"djdave" <djdave@fake.com> wrote in message
>>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com. ..
>>> What Year?
>>>
>>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>>
>>>>Hi,
>>>> I was planning on moving the coil spring perch's on the Dana44
>>>>on the back of my TJ to bring them back level under normal
>>>>circumstances, due to a suspension lift then arm adjustments to
>>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>>Lift start as an initiation sequence. What safety precautions would
>>>>be recommended in relation to the electrics on the vehicle before
>>>>beginning to weld.
>>>>
>>>>Any information would be greatly appreciated.
>>>>
>>>>Cheers
>>>>Nick
>>>
>>
If it were me doing the welding, I would disconnect the battery,
protect area below with a welding blanket, and protect area above with
sheetmetal shields. With tig, its not like your throwing alot of slag
around. A shielding gas does wonders for keeping impurities out. Just
make sure your parts are cleaned up good.
djdave
On Mon, 29 Jan 2007 09:42:18 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Thanks for replies, I will bear them all in mind before I start.
>
>It's a 2002 TJ as I think someone asked what year and I am assuming
>that was referring to the vehicle
>
>Cheers
>Nick
>
>On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
><carlsaiyed@REMOVE.hotmail.com> wrote:
>
>>97-05 >BFG<
>>
>>Carl
>>
>>"djdave" <djdave@fake.com> wrote in message
>>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com. ..
>>> What Year?
>>>
>>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>>
>>>>Hi,
>>>> I was planning on moving the coil spring perch's on the Dana44
>>>>on the back of my TJ to bring them back level under normal
>>>>circumstances, due to a suspension lift then arm adjustments to
>>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>>Lift start as an initiation sequence. What safety precautions would
>>>>be recommended in relation to the electrics on the vehicle before
>>>>beginning to weld.
>>>>
>>>>Any information would be greatly appreciated.
>>>>
>>>>Cheers
>>>>Nick
>>>
>>
#89
Guest
Posts: n/a
Re: TIG Welding on a TJ
It was me who asked about the year of the vehicle...
If it were me doing the welding, I would disconnect the battery,
protect area below with a welding blanket, and protect area above with
sheetmetal shields. With tig, its not like your throwing alot of slag
around. A shielding gas does wonders for keeping impurities out. Just
make sure your parts are cleaned up good.
djdave
On Mon, 29 Jan 2007 09:42:18 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Thanks for replies, I will bear them all in mind before I start.
>
>It's a 2002 TJ as I think someone asked what year and I am assuming
>that was referring to the vehicle
>
>Cheers
>Nick
>
>On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
><carlsaiyed@REMOVE.hotmail.com> wrote:
>
>>97-05 >BFG<
>>
>>Carl
>>
>>"djdave" <djdave@fake.com> wrote in message
>>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com. ..
>>> What Year?
>>>
>>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>>
>>>>Hi,
>>>> I was planning on moving the coil spring perch's on the Dana44
>>>>on the back of my TJ to bring them back level under normal
>>>>circumstances, due to a suspension lift then arm adjustments to
>>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>>Lift start as an initiation sequence. What safety precautions would
>>>>be recommended in relation to the electrics on the vehicle before
>>>>beginning to weld.
>>>>
>>>>Any information would be greatly appreciated.
>>>>
>>>>Cheers
>>>>Nick
>>>
>>
If it were me doing the welding, I would disconnect the battery,
protect area below with a welding blanket, and protect area above with
sheetmetal shields. With tig, its not like your throwing alot of slag
around. A shielding gas does wonders for keeping impurities out. Just
make sure your parts are cleaned up good.
djdave
On Mon, 29 Jan 2007 09:42:18 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Thanks for replies, I will bear them all in mind before I start.
>
>It's a 2002 TJ as I think someone asked what year and I am assuming
>that was referring to the vehicle
>
>Cheers
>Nick
>
>On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
><carlsaiyed@REMOVE.hotmail.com> wrote:
>
>>97-05 >BFG<
>>
>>Carl
>>
>>"djdave" <djdave@fake.com> wrote in message
>>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com. ..
>>> What Year?
>>>
>>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>>
>>>>Hi,
>>>> I was planning on moving the coil spring perch's on the Dana44
>>>>on the back of my TJ to bring them back level under normal
>>>>circumstances, due to a suspension lift then arm adjustments to
>>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>>Lift start as an initiation sequence. What safety precautions would
>>>>be recommended in relation to the electrics on the vehicle before
>>>>beginning to weld.
>>>>
>>>>Any information would be greatly appreciated.
>>>>
>>>>Cheers
>>>>Nick
>>>
>>
#90
Guest
Posts: n/a
Re: TIG Welding on a TJ
I watched those cop videos or something like it last week and a guy at a
gas pump caught on fire.
He stopped dropped and rolled and the fire would not go out. He rolled
and rolled and rolled. An extinguisher was used, the fire still would
not go out. The finally got it out by tossing a coat and a shirt on him
to smother it....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Carl S wrote:
> It would be kind of difficult to throw the tarps under a Jeep? Thats what I
> figured the F.E was for, and the hose. I certainly wouldn't want a tarp
> thrown on me if I was on fire. I would hopefully remember to stop, drop, and
> roll.
>
> Carl
>
> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
> news:525j8aF1n9d11U1@mid.individual.net...
>> Remove the oxygen from the fire. Like you learned in elementary
>> school,
>> drop and roll.
>> God Bless America, Bill 0|||||||0
>> mailto:-------------------- http://www.----------.com/
>>
>> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
>> news:jPGdnUEB9L4CwiDYnZ2dnUVZ_vCknZ2d@comcast.com. ..
>>> What do you use the tarps for?
>>>
>>> Carl
>>
>
>
gas pump caught on fire.
He stopped dropped and rolled and the fire would not go out. He rolled
and rolled and rolled. An extinguisher was used, the fire still would
not go out. The finally got it out by tossing a coat and a shirt on him
to smother it....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Carl S wrote:
> It would be kind of difficult to throw the tarps under a Jeep? Thats what I
> figured the F.E was for, and the hose. I certainly wouldn't want a tarp
> thrown on me if I was on fire. I would hopefully remember to stop, drop, and
> roll.
>
> Carl
>
> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
> news:525j8aF1n9d11U1@mid.individual.net...
>> Remove the oxygen from the fire. Like you learned in elementary
>> school,
>> drop and roll.
>> God Bless America, Bill 0|||||||0
>> mailto:-------------------- http://www.----------.com/
>>
>> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
>> news:jPGdnUEB9L4CwiDYnZ2dnUVZ_vCknZ2d@comcast.com. ..
>>> What do you use the tarps for?
>>>
>>> Carl
>>
>
>