TIG Welding on a TJ
01-28-2007, 09:44 PM
#31
Guest
Posts: n/a
Re: TIG Welding on a TJ
What do you use the tarps for?
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:5253c6F1mnu0cU1@mid.individual.net...
>I meant tarps like a trucker would tarp his load on with:
> http://shop.coversuperstore.com/inde...categoryID=359
> Not the plastic covers, you might buy from China. You may substitute a
> heavy
> wool blanket to smother any flames.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:G7OdnSke0rPi0yDYnZ2dnUVZ_qOpnZ2d@comcast.com. ..
>> Bill,
>>
>> Tarps?
>>
>> Carl
>>
>> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
>> news:5250g3F1n6emcU1@mid.individual.net...
>> > I like to have someone watching me with a fire extinguisher, water
> hose
>> > and tarps.
>> > God Bless America, Bill 0|||||||0
>> > mailto:-------------------- http://www.----------.com/
>> >
>> > "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
>> > news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
>> >> Hi,
>> >> I was planning on moving the coil spring perch's on the Dana44
>> >> on the back of my TJ to bring them back level under normal
>> >> circumstances, due to a suspension lift then arm adjustments to
>> >> realign the pinion angle. I am planning on using my TIG it has HF or
>> >> Lift start as an initiation sequence. What safety precautions would
>> >> be recommended in relation to the electrics on the vehicle before
>> >> beginning to weld.
>> >>
>> >> Any information would be greatly appreciated.
>> >>
>> >> Cheers
>> >> Nick
>> >
>> >
>>
>>
>
>
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:5253c6F1mnu0cU1@mid.individual.net...
>I meant tarps like a trucker would tarp his load on with:
> http://shop.coversuperstore.com/inde...categoryID=359
> Not the plastic covers, you might buy from China. You may substitute a
> heavy
> wool blanket to smother any flames.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:G7OdnSke0rPi0yDYnZ2dnUVZ_qOpnZ2d@comcast.com. ..
>> Bill,
>>
>> Tarps?
>>
>> Carl
>>
>> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
>> news:5250g3F1n6emcU1@mid.individual.net...
>> > I like to have someone watching me with a fire extinguisher, water
> hose
>> > and tarps.
>> > God Bless America, Bill 0|||||||0
>> > mailto:-------------------- http://www.----------.com/
>> >
>> > "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
>> > news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
>> >> Hi,
>> >> I was planning on moving the coil spring perch's on the Dana44
>> >> on the back of my TJ to bring them back level under normal
>> >> circumstances, due to a suspension lift then arm adjustments to
>> >> realign the pinion angle. I am planning on using my TIG it has HF or
>> >> Lift start as an initiation sequence. What safety precautions would
>> >> be recommended in relation to the electrics on the vehicle before
>> >> beginning to weld.
>> >>
>> >> Any information would be greatly appreciated.
>> >>
>> >> Cheers
>> >> Nick
>> >
>> >
>>
>>
>
>
01-28-2007, 09:44 PM
#32
Guest
Posts: n/a
Re: TIG Welding on a TJ
What do you use the tarps for?
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:5253c6F1mnu0cU1@mid.individual.net...
>I meant tarps like a trucker would tarp his load on with:
> http://shop.coversuperstore.com/inde...categoryID=359
> Not the plastic covers, you might buy from China. You may substitute a
> heavy
> wool blanket to smother any flames.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:G7OdnSke0rPi0yDYnZ2dnUVZ_qOpnZ2d@comcast.com. ..
>> Bill,
>>
>> Tarps?
>>
>> Carl
>>
>> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
>> news:5250g3F1n6emcU1@mid.individual.net...
>> > I like to have someone watching me with a fire extinguisher, water
> hose
>> > and tarps.
>> > God Bless America, Bill 0|||||||0
>> > mailto:-------------------- http://www.----------.com/
>> >
>> > "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
>> > news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
>> >> Hi,
>> >> I was planning on moving the coil spring perch's on the Dana44
>> >> on the back of my TJ to bring them back level under normal
>> >> circumstances, due to a suspension lift then arm adjustments to
>> >> realign the pinion angle. I am planning on using my TIG it has HF or
>> >> Lift start as an initiation sequence. What safety precautions would
>> >> be recommended in relation to the electrics on the vehicle before
>> >> beginning to weld.
>> >>
>> >> Any information would be greatly appreciated.
>> >>
>> >> Cheers
>> >> Nick
>> >
>> >
>>
>>
>
>
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:5253c6F1mnu0cU1@mid.individual.net...
>I meant tarps like a trucker would tarp his load on with:
> http://shop.coversuperstore.com/inde...categoryID=359
> Not the plastic covers, you might buy from China. You may substitute a
> heavy
> wool blanket to smother any flames.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:G7OdnSke0rPi0yDYnZ2dnUVZ_qOpnZ2d@comcast.com. ..
>> Bill,
>>
>> Tarps?
>>
>> Carl
>>
>> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
>> news:5250g3F1n6emcU1@mid.individual.net...
>> > I like to have someone watching me with a fire extinguisher, water
> hose
>> > and tarps.
>> > God Bless America, Bill 0|||||||0
>> > mailto:-------------------- http://www.----------.com/
>> >
>> > "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
>> > news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
>> >> Hi,
>> >> I was planning on moving the coil spring perch's on the Dana44
>> >> on the back of my TJ to bring them back level under normal
>> >> circumstances, due to a suspension lift then arm adjustments to
>> >> realign the pinion angle. I am planning on using my TIG it has HF or
>> >> Lift start as an initiation sequence. What safety precautions would
>> >> be recommended in relation to the electrics on the vehicle before
>> >> beginning to weld.
>> >>
>> >> Any information would be greatly appreciated.
>> >>
>> >> Cheers
>> >> Nick
>> >
>> >
>>
>>
>
>
01-28-2007, 09:44 PM
#33
Guest
Posts: n/a
Re: TIG Welding on a TJ
What do you use the tarps for?
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:5253c6F1mnu0cU1@mid.individual.net...
>I meant tarps like a trucker would tarp his load on with:
> http://shop.coversuperstore.com/inde...categoryID=359
> Not the plastic covers, you might buy from China. You may substitute a
> heavy
> wool blanket to smother any flames.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:G7OdnSke0rPi0yDYnZ2dnUVZ_qOpnZ2d@comcast.com. ..
>> Bill,
>>
>> Tarps?
>>
>> Carl
>>
>> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
>> news:5250g3F1n6emcU1@mid.individual.net...
>> > I like to have someone watching me with a fire extinguisher, water
> hose
>> > and tarps.
>> > God Bless America, Bill 0|||||||0
>> > mailto:-------------------- http://www.----------.com/
>> >
>> > "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
>> > news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
>> >> Hi,
>> >> I was planning on moving the coil spring perch's on the Dana44
>> >> on the back of my TJ to bring them back level under normal
>> >> circumstances, due to a suspension lift then arm adjustments to
>> >> realign the pinion angle. I am planning on using my TIG it has HF or
>> >> Lift start as an initiation sequence. What safety precautions would
>> >> be recommended in relation to the electrics on the vehicle before
>> >> beginning to weld.
>> >>
>> >> Any information would be greatly appreciated.
>> >>
>> >> Cheers
>> >> Nick
>> >
>> >
>>
>>
>
>
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:5253c6F1mnu0cU1@mid.individual.net...
>I meant tarps like a trucker would tarp his load on with:
> http://shop.coversuperstore.com/inde...categoryID=359
> Not the plastic covers, you might buy from China. You may substitute a
> heavy
> wool blanket to smother any flames.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:G7OdnSke0rPi0yDYnZ2dnUVZ_qOpnZ2d@comcast.com. ..
>> Bill,
>>
>> Tarps?
>>
>> Carl
>>
>> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
>> news:5250g3F1n6emcU1@mid.individual.net...
>> > I like to have someone watching me with a fire extinguisher, water
> hose
>> > and tarps.
>> > God Bless America, Bill 0|||||||0
>> > mailto:-------------------- http://www.----------.com/
>> >
>> > "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
>> > news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
>> >> Hi,
>> >> I was planning on moving the coil spring perch's on the Dana44
>> >> on the back of my TJ to bring them back level under normal
>> >> circumstances, due to a suspension lift then arm adjustments to
>> >> realign the pinion angle. I am planning on using my TIG it has HF or
>> >> Lift start as an initiation sequence. What safety precautions would
>> >> be recommended in relation to the electrics on the vehicle before
>> >> beginning to weld.
>> >>
>> >> Any information would be greatly appreciated.
>> >>
>> >> Cheers
>> >> Nick
>> >
>> >
>>
>>
>
>
01-28-2007, 10:20 PM
#34
Guest
Posts: n/a
Re: TIG Welding on a TJ
What Year?
On Sun, 28 Jan 2007 22:15:59 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> I was planning on moving the coil spring perch's on the Dana44
>on the back of my TJ to bring them back level under normal
>circumstances, due to a suspension lift then arm adjustments to
>realign the pinion angle. I am planning on using my TIG it has HF or
>Lift start as an initiation sequence. What safety precautions would
>be recommended in relation to the electrics on the vehicle before
>beginning to weld.
>
>Any information would be greatly appreciated.
>
>Cheers
>Nick
On Sun, 28 Jan 2007 22:15:59 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> I was planning on moving the coil spring perch's on the Dana44
>on the back of my TJ to bring them back level under normal
>circumstances, due to a suspension lift then arm adjustments to
>realign the pinion angle. I am planning on using my TIG it has HF or
>Lift start as an initiation sequence. What safety precautions would
>be recommended in relation to the electrics on the vehicle before
>beginning to weld.
>
>Any information would be greatly appreciated.
>
>Cheers
>Nick
01-28-2007, 10:20 PM
#35
Guest
Posts: n/a
Re: TIG Welding on a TJ
What Year?
On Sun, 28 Jan 2007 22:15:59 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> I was planning on moving the coil spring perch's on the Dana44
>on the back of my TJ to bring them back level under normal
>circumstances, due to a suspension lift then arm adjustments to
>realign the pinion angle. I am planning on using my TIG it has HF or
>Lift start as an initiation sequence. What safety precautions would
>be recommended in relation to the electrics on the vehicle before
>beginning to weld.
>
>Any information would be greatly appreciated.
>
>Cheers
>Nick
On Sun, 28 Jan 2007 22:15:59 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> I was planning on moving the coil spring perch's on the Dana44
>on the back of my TJ to bring them back level under normal
>circumstances, due to a suspension lift then arm adjustments to
>realign the pinion angle. I am planning on using my TIG it has HF or
>Lift start as an initiation sequence. What safety precautions would
>be recommended in relation to the electrics on the vehicle before
>beginning to weld.
>
>Any information would be greatly appreciated.
>
>Cheers
>Nick
01-28-2007, 10:20 PM
#36
Guest
Posts: n/a
Re: TIG Welding on a TJ
What Year?
On Sun, 28 Jan 2007 22:15:59 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> I was planning on moving the coil spring perch's on the Dana44
>on the back of my TJ to bring them back level under normal
>circumstances, due to a suspension lift then arm adjustments to
>realign the pinion angle. I am planning on using my TIG it has HF or
>Lift start as an initiation sequence. What safety precautions would
>be recommended in relation to the electrics on the vehicle before
>beginning to weld.
>
>Any information would be greatly appreciated.
>
>Cheers
>Nick
On Sun, 28 Jan 2007 22:15:59 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> I was planning on moving the coil spring perch's on the Dana44
>on the back of my TJ to bring them back level under normal
>circumstances, due to a suspension lift then arm adjustments to
>realign the pinion angle. I am planning on using my TIG it has HF or
>Lift start as an initiation sequence. What safety precautions would
>be recommended in relation to the electrics on the vehicle before
>beginning to weld.
>
>Any information would be greatly appreciated.
>
>Cheers
>Nick
01-28-2007, 10:20 PM
#37
Guest
Posts: n/a
Re: TIG Welding on a TJ
What Year?
On Sun, 28 Jan 2007 22:15:59 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> I was planning on moving the coil spring perch's on the Dana44
>on the back of my TJ to bring them back level under normal
>circumstances, due to a suspension lift then arm adjustments to
>realign the pinion angle. I am planning on using my TIG it has HF or
>Lift start as an initiation sequence. What safety precautions would
>be recommended in relation to the electrics on the vehicle before
>beginning to weld.
>
>Any information would be greatly appreciated.
>
>Cheers
>Nick
On Sun, 28 Jan 2007 22:15:59 +0000, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> I was planning on moving the coil spring perch's on the Dana44
>on the back of my TJ to bring them back level under normal
>circumstances, due to a suspension lift then arm adjustments to
>realign the pinion angle. I am planning on using my TIG it has HF or
>Lift start as an initiation sequence. What safety precautions would
>be recommended in relation to the electrics on the vehicle before
>beginning to weld.
>
>Any information would be greatly appreciated.
>
>Cheers
>Nick
01-28-2007, 10:46 PM
#38
Guest
Posts: n/a
Re: TIG Welding on a TJ
97-05 >BFG<
Carl
"djdave" <djdave@fake.com> wrote in message
news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com...
> What Year?
>
> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
> <nick@nospam_nrdavis.demon.co.uk> wrote:
>
>>Hi,
>> I was planning on moving the coil spring perch's on the Dana44
>>on the back of my TJ to bring them back level under normal
>>circumstances, due to a suspension lift then arm adjustments to
>>realign the pinion angle. I am planning on using my TIG it has HF or
>>Lift start as an initiation sequence. What safety precautions would
>>be recommended in relation to the electrics on the vehicle before
>>beginning to weld.
>>
>>Any information would be greatly appreciated.
>>
>>Cheers
>>Nick
>
Carl
"djdave" <djdave@fake.com> wrote in message
news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com...
> What Year?
>
> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
> <nick@nospam_nrdavis.demon.co.uk> wrote:
>
>>Hi,
>> I was planning on moving the coil spring perch's on the Dana44
>>on the back of my TJ to bring them back level under normal
>>circumstances, due to a suspension lift then arm adjustments to
>>realign the pinion angle. I am planning on using my TIG it has HF or
>>Lift start as an initiation sequence. What safety precautions would
>>be recommended in relation to the electrics on the vehicle before
>>beginning to weld.
>>
>>Any information would be greatly appreciated.
>>
>>Cheers
>>Nick
>
01-28-2007, 10:46 PM
#39
Guest
Posts: n/a
Re: TIG Welding on a TJ
97-05 >BFG<
Carl
"djdave" <djdave@fake.com> wrote in message
news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com...
> What Year?
>
> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
> <nick@nospam_nrdavis.demon.co.uk> wrote:
>
>>Hi,
>> I was planning on moving the coil spring perch's on the Dana44
>>on the back of my TJ to bring them back level under normal
>>circumstances, due to a suspension lift then arm adjustments to
>>realign the pinion angle. I am planning on using my TIG it has HF or
>>Lift start as an initiation sequence. What safety precautions would
>>be recommended in relation to the electrics on the vehicle before
>>beginning to weld.
>>
>>Any information would be greatly appreciated.
>>
>>Cheers
>>Nick
>
Carl
"djdave" <djdave@fake.com> wrote in message
news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com...
> What Year?
>
> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
> <nick@nospam_nrdavis.demon.co.uk> wrote:
>
>>Hi,
>> I was planning on moving the coil spring perch's on the Dana44
>>on the back of my TJ to bring them back level under normal
>>circumstances, due to a suspension lift then arm adjustments to
>>realign the pinion angle. I am planning on using my TIG it has HF or
>>Lift start as an initiation sequence. What safety precautions would
>>be recommended in relation to the electrics on the vehicle before
>>beginning to weld.
>>
>>Any information would be greatly appreciated.
>>
>>Cheers
>>Nick
>
01-28-2007, 10:46 PM
#40
Guest
Posts: n/a
Re: TIG Welding on a TJ
97-05 >BFG<
Carl
"djdave" <djdave@fake.com> wrote in message
news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com...
> What Year?
>
> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
> <nick@nospam_nrdavis.demon.co.uk> wrote:
>
>>Hi,
>> I was planning on moving the coil spring perch's on the Dana44
>>on the back of my TJ to bring them back level under normal
>>circumstances, due to a suspension lift then arm adjustments to
>>realign the pinion angle. I am planning on using my TIG it has HF or
>>Lift start as an initiation sequence. What safety precautions would
>>be recommended in relation to the electrics on the vehicle before
>>beginning to weld.
>>
>>Any information would be greatly appreciated.
>>
>>Cheers
>>Nick
>
Carl
"djdave" <djdave@fake.com> wrote in message
news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com...
> What Year?
>
> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
> <nick@nospam_nrdavis.demon.co.uk> wrote:
>
>>Hi,
>> I was planning on moving the coil spring perch's on the Dana44
>>on the back of my TJ to bring them back level under normal
>>circumstances, due to a suspension lift then arm adjustments to
>>realign the pinion angle. I am planning on using my TIG it has HF or
>>Lift start as an initiation sequence. What safety precautions would
>>be recommended in relation to the electrics on the vehicle before
>>beginning to weld.
>>
>>Any information would be greatly appreciated.
>>
>>Cheers
>>Nick
>