is there suppose to be a hood seal on a cj7?
12-15-2003, 07:19 PM
#1
Guest
Posts: n/a
Re: is there suppose to be a hood seal on a cj7?
No hood seal on the OEM body. There is an offset that drops below the front
grill.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:vtsi8omifp4e7b@corp.supernews.com...
> yesterday I was driving my 86 cj7 with a fiberglass body around in the
snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
>
>
grill.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:vtsi8omifp4e7b@corp.supernews.com...
> yesterday I was driving my 86 cj7 with a fiberglass body around in the
snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
>
>
12-15-2003, 07:19 PM
#2
Guest
Posts: n/a
Re: is there suppose to be a hood seal on a cj7?
No hood seal on the OEM body. There is an offset that drops below the front
grill.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:vtsi8omifp4e7b@corp.supernews.com...
> yesterday I was driving my 86 cj7 with a fiberglass body around in the
snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
>
>
grill.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:vtsi8omifp4e7b@corp.supernews.com...
> yesterday I was driving my 86 cj7 with a fiberglass body around in the
snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
>
>
12-15-2003, 07:19 PM
#3
Guest
Posts: n/a
Re: is there suppose to be a hood seal on a cj7?
No hood seal on the OEM body. There is an offset that drops below the front
grill.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:vtsi8omifp4e7b@corp.supernews.com...
> yesterday I was driving my 86 cj7 with a fiberglass body around in the
snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
>
>
grill.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:vtsi8omifp4e7b@corp.supernews.com...
> yesterday I was driving my 86 cj7 with a fiberglass body around in the
snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
>
>
12-15-2003, 07:44 PM
#4
Guest
Posts: n/a
is there suppose to be a hood seal on a cj7?
yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
and I checked the motor and it was all wet like someone sprayed it with a
hose and there was snow in the front of the Weber carb air cleaner. did
someone leave out a hood seal when they installed my fiberglass body?
thanks carmine
and I checked the motor and it was all wet like someone sprayed it with a
hose and there was snow in the front of the Weber carb air cleaner. did
someone leave out a hood seal when they installed my fiberglass body?
thanks carmine
12-16-2003, 09:50 AM
#5
Guest
Posts: n/a
Re: is there suppose to be a hood seal on a cj7?
On or about Mon, 15 Dec 2003, Jet of jet@bestweb.net wrote:
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
Nope, no weatherstripping around the hood. Some CJs had extra splash
panels (roughly 8"x8") to bridge the gap between the trailing edge of the
inner fender and the bottom of the firewall, but I've no idea if these
were optional or model-year dependent.
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
Nope, no weatherstripping around the hood. Some CJs had extra splash
panels (roughly 8"x8") to bridge the gap between the trailing edge of the
inner fender and the bottom of the firewall, but I've no idea if these
were optional or model-year dependent.
12-16-2003, 09:50 AM
#6
Guest
Posts: n/a
Re: is there suppose to be a hood seal on a cj7?
On or about Mon, 15 Dec 2003, Jet of jet@bestweb.net wrote:
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
Nope, no weatherstripping around the hood. Some CJs had extra splash
panels (roughly 8"x8") to bridge the gap between the trailing edge of the
inner fender and the bottom of the firewall, but I've no idea if these
were optional or model-year dependent.
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
Nope, no weatherstripping around the hood. Some CJs had extra splash
panels (roughly 8"x8") to bridge the gap between the trailing edge of the
inner fender and the bottom of the firewall, but I've no idea if these
were optional or model-year dependent.
12-16-2003, 09:50 AM
#7
Guest
Posts: n/a
Re: is there suppose to be a hood seal on a cj7?
On or about Mon, 15 Dec 2003, Jet of jet@bestweb.net wrote:
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
Nope, no weatherstripping around the hood. Some CJs had extra splash
panels (roughly 8"x8") to bridge the gap between the trailing edge of the
inner fender and the bottom of the firewall, but I've no idea if these
were optional or model-year dependent.
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
Nope, no weatherstripping around the hood. Some CJs had extra splash
panels (roughly 8"x8") to bridge the gap between the trailing edge of the
inner fender and the bottom of the firewall, but I've no idea if these
were optional or model-year dependent.
12-16-2003, 10:55 AM
#8
Guest
Posts: n/a
Re: is there suppose to be a hood seal on a cj7?
No seals on mine, but I have the 'glass one piece front clip.
If you have any kind of lift on it, the axles get down into the air flow
and snow will blow up into the engine.
I had my carb actually freeze up a couple weeks ago on a 250 km drive in
white out conditions. I was running for an extended time (2 or 3 hours)
in 3rd gear at 2000 rpm and the sucker froze at 2000 rpm. I had to pull
off the road and let it sit for a while running to melt the ice/snow
buildup around the carb linkage.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jet wrote:
>
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
If you have any kind of lift on it, the axles get down into the air flow
and snow will blow up into the engine.
I had my carb actually freeze up a couple weeks ago on a 250 km drive in
white out conditions. I was running for an extended time (2 or 3 hours)
in 3rd gear at 2000 rpm and the sucker froze at 2000 rpm. I had to pull
off the road and let it sit for a while running to melt the ice/snow
buildup around the carb linkage.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jet wrote:
>
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
12-16-2003, 10:55 AM
#9
Guest
Posts: n/a
Re: is there suppose to be a hood seal on a cj7?
No seals on mine, but I have the 'glass one piece front clip.
If you have any kind of lift on it, the axles get down into the air flow
and snow will blow up into the engine.
I had my carb actually freeze up a couple weeks ago on a 250 km drive in
white out conditions. I was running for an extended time (2 or 3 hours)
in 3rd gear at 2000 rpm and the sucker froze at 2000 rpm. I had to pull
off the road and let it sit for a while running to melt the ice/snow
buildup around the carb linkage.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jet wrote:
>
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
If you have any kind of lift on it, the axles get down into the air flow
and snow will blow up into the engine.
I had my carb actually freeze up a couple weeks ago on a 250 km drive in
white out conditions. I was running for an extended time (2 or 3 hours)
in 3rd gear at 2000 rpm and the sucker froze at 2000 rpm. I had to pull
off the road and let it sit for a while running to melt the ice/snow
buildup around the carb linkage.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jet wrote:
>
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
12-16-2003, 10:55 AM
#10
Guest
Posts: n/a
Re: is there suppose to be a hood seal on a cj7?
No seals on mine, but I have the 'glass one piece front clip.
If you have any kind of lift on it, the axles get down into the air flow
and snow will blow up into the engine.
I had my carb actually freeze up a couple weeks ago on a 250 km drive in
white out conditions. I was running for an extended time (2 or 3 hours)
in 3rd gear at 2000 rpm and the sucker froze at 2000 rpm. I had to pull
off the road and let it sit for a while running to melt the ice/snow
buildup around the carb linkage.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jet wrote:
>
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine
If you have any kind of lift on it, the axles get down into the air flow
and snow will blow up into the engine.
I had my carb actually freeze up a couple weeks ago on a 250 km drive in
white out conditions. I was running for an extended time (2 or 3 hours)
in 3rd gear at 2000 rpm and the sucker froze at 2000 rpm. I had to pull
off the road and let it sit for a while running to melt the ice/snow
buildup around the carb linkage.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jet wrote:
>
> yesterday I was driving my 86 cj7 with a fiberglass body around in the snow
> and I checked the motor and it was all wet like someone sprayed it with a
> hose and there was snow in the front of the Weber carb air cleaner. did
> someone leave out a hood seal when they installed my fiberglass body?
> thanks carmine