TBI Set-up
#11
Guest
Posts: n/a
Re: TBI Set-up
Fuji,
Thanks, you seem to be very knowledgeable. As it turns out I may have
been going the wrong direction thinking that the TBI was the problem. I
was working on it earlier today and figured out that the vacume
cannister was cracked so I got rid of that sucker. I also removed the
EGR valve. That got rid of the hesitation but now it idles rough and
sometimes dies after it is warmed up. I'm going to put a timing light
on it tomorrow. Thanks again for all the useful info.
Jeffro G
Thanks, you seem to be very knowledgeable. As it turns out I may have
been going the wrong direction thinking that the TBI was the problem. I
was working on it earlier today and figured out that the vacume
cannister was cracked so I got rid of that sucker. I also removed the
EGR valve. That got rid of the hesitation but now it idles rough and
sometimes dies after it is warmed up. I'm going to put a timing light
on it tomorrow. Thanks again for all the useful info.
Jeffro G
#12
Guest
Posts: n/a
Re: TBI Set-up
Fuji,
Thanks, you seem to be very knowledgeable. As it turns out I may have
been going the wrong direction thinking that the TBI was the problem. I
was working on it earlier today and figured out that the vacume
cannister was cracked so I got rid of that sucker. I also removed the
EGR valve. That got rid of the hesitation but now it idles rough and
sometimes dies after it is warmed up. I'm going to put a timing light
on it tomorrow. Thanks again for all the useful info.
Jeffro G
Thanks, you seem to be very knowledgeable. As it turns out I may have
been going the wrong direction thinking that the TBI was the problem. I
was working on it earlier today and figured out that the vacume
cannister was cracked so I got rid of that sucker. I also removed the
EGR valve. That got rid of the hesitation but now it idles rough and
sometimes dies after it is warmed up. I'm going to put a timing light
on it tomorrow. Thanks again for all the useful info.
Jeffro G
#13
Guest
Posts: n/a
Re: TBI Set-up
Fuji,
Thanks, you seem to be very knowledgeable. As it turns out I may have
been going the wrong direction thinking that the TBI was the problem. I
was working on it earlier today and figured out that the vacume
cannister was cracked so I got rid of that sucker. I also removed the
EGR valve. That got rid of the hesitation but now it idles rough and
sometimes dies after it is warmed up. I'm going to put a timing light
on it tomorrow. Thanks again for all the useful info.
Jeffro G
Thanks, you seem to be very knowledgeable. As it turns out I may have
been going the wrong direction thinking that the TBI was the problem. I
was working on it earlier today and figured out that the vacume
cannister was cracked so I got rid of that sucker. I also removed the
EGR valve. That got rid of the hesitation but now it idles rough and
sometimes dies after it is warmed up. I'm going to put a timing light
on it tomorrow. Thanks again for all the useful info.
Jeffro G
Thread
Thread Starter
Forum
Replies
Last Post
DragRace_Ray
Off Topic Chat
0
07-30-2007 07:34 AM
Masnor
Jeep Mailing List
48
07-04-2007 01:31 AM
Jacob
Jeep Mailing List
0
07-06-2004 01:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)