"Target Idle RPM not reached" (t-200)
06-14-2006, 09:38 PM
#1
Guest
Posts: n/a
"Target Idle RPM not reached" (t-200)
I got a shop to read the error code and got this error. They are
telling me that the idle air controller motor is sticking and needs to
be replaced. They are estimating $185 for the repair. I am no mechanic,
but I have been told that this is easy to replace. Anybody got any info
or ideas? Thanks.
Doug
telling me that the idle air controller motor is sticking and needs to
be replaced. They are estimating $185 for the repair. I am no mechanic,
but I have been told that this is easy to replace. Anybody got any info
or ideas? Thanks.
Doug
06-14-2006, 10:11 PM
#2
Guest
Posts: n/a
Re: "Target Idle RPM not reached" (t-200)
"Sticking" might be fixable with a few squirts of carburetor cleaner. I am
thinking that your shop might have a policy of replacing the entire unit,
because it is a more reliable fix. Maybe you can find someone else, who is
willing to clean it instead.
Earle
<dvrdn72@gmail.com> wrote in message
news:1150335521.473863.226860@g10g2000cwb.googlegr oups.com...
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
>
> Doug
>
thinking that your shop might have a policy of replacing the entire unit,
because it is a more reliable fix. Maybe you can find someone else, who is
willing to clean it instead.
Earle
<dvrdn72@gmail.com> wrote in message
news:1150335521.473863.226860@g10g2000cwb.googlegr oups.com...
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
>
> Doug
>
06-14-2006, 10:11 PM
#3
Guest
Posts: n/a
Re: "Target Idle RPM not reached" (t-200)
"Sticking" might be fixable with a few squirts of carburetor cleaner. I am
thinking that your shop might have a policy of replacing the entire unit,
because it is a more reliable fix. Maybe you can find someone else, who is
willing to clean it instead.
Earle
<dvrdn72@gmail.com> wrote in message
news:1150335521.473863.226860@g10g2000cwb.googlegr oups.com...
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
>
> Doug
>
thinking that your shop might have a policy of replacing the entire unit,
because it is a more reliable fix. Maybe you can find someone else, who is
willing to clean it instead.
Earle
<dvrdn72@gmail.com> wrote in message
news:1150335521.473863.226860@g10g2000cwb.googlegr oups.com...
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
>
> Doug
>
06-14-2006, 10:11 PM
#4
Guest
Posts: n/a
Re: "Target Idle RPM not reached" (t-200)
"Sticking" might be fixable with a few squirts of carburetor cleaner. I am
thinking that your shop might have a policy of replacing the entire unit,
because it is a more reliable fix. Maybe you can find someone else, who is
willing to clean it instead.
Earle
<dvrdn72@gmail.com> wrote in message
news:1150335521.473863.226860@g10g2000cwb.googlegr oups.com...
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
>
> Doug
>
thinking that your shop might have a policy of replacing the entire unit,
because it is a more reliable fix. Maybe you can find someone else, who is
willing to clean it instead.
Earle
<dvrdn72@gmail.com> wrote in message
news:1150335521.473863.226860@g10g2000cwb.googlegr oups.com...
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
>
> Doug
>
06-14-2006, 10:46 PM
#5
Guest
Posts: n/a
Re: "Target Idle RPM not reached" (t-200)
dvrdn72 did pass the time by typing:
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
soooper easy.
http://revbeergoggles.com/tb/tb.html
NAPA has them
Idle Air Control Valve
21856 53007562 $48.99
Best thing to do is to clean it first with some TB cleaner.
Be careful of the gasket. If you rip it you will need a new one.
And don't pull on the pintle (pointy thing that sticks out
of the coil).
--
DougW
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
soooper easy.
http://revbeergoggles.com/tb/tb.html
NAPA has them
Idle Air Control Valve
21856 53007562 $48.99
Best thing to do is to clean it first with some TB cleaner.
Be careful of the gasket. If you rip it you will need a new one.
And don't pull on the pintle (pointy thing that sticks out
of the coil).
--
DougW
06-14-2006, 10:46 PM
#6
Guest
Posts: n/a
Re: "Target Idle RPM not reached" (t-200)
dvrdn72 did pass the time by typing:
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
soooper easy.
http://revbeergoggles.com/tb/tb.html
NAPA has them
Idle Air Control Valve
21856 53007562 $48.99
Best thing to do is to clean it first with some TB cleaner.
Be careful of the gasket. If you rip it you will need a new one.
And don't pull on the pintle (pointy thing that sticks out
of the coil).
--
DougW
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
soooper easy.
http://revbeergoggles.com/tb/tb.html
NAPA has them
Idle Air Control Valve
21856 53007562 $48.99
Best thing to do is to clean it first with some TB cleaner.
Be careful of the gasket. If you rip it you will need a new one.
And don't pull on the pintle (pointy thing that sticks out
of the coil).
--
DougW
06-14-2006, 10:46 PM
#7
Guest
Posts: n/a
Re: "Target Idle RPM not reached" (t-200)
dvrdn72 did pass the time by typing:
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
soooper easy.
http://revbeergoggles.com/tb/tb.html
NAPA has them
Idle Air Control Valve
21856 53007562 $48.99
Best thing to do is to clean it first with some TB cleaner.
Be careful of the gasket. If you rip it you will need a new one.
And don't pull on the pintle (pointy thing that sticks out
of the coil).
--
DougW
> I got a shop to read the error code and got this error. They are
> telling me that the idle air controller motor is sticking and needs to
> be replaced. They are estimating $185 for the repair. I am no mechanic,
> but I have been told that this is easy to replace. Anybody got any info
> or ideas? Thanks.
soooper easy.
http://revbeergoggles.com/tb/tb.html
NAPA has them
Idle Air Control Valve
21856 53007562 $48.99
Best thing to do is to clean it first with some TB cleaner.
Be careful of the gasket. If you rip it you will need a new one.
And don't pull on the pintle (pointy thing that sticks out
of the coil).
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
centaur23
Jeep Grand Cherokee Forum
3
12-08-2013 12:48 AM
jeepadmin
Jeep News
0
11-04-2007 06:38 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
