"Target Idle RPM not reached" (t-200)
I got a shop to read the error code and got this error. They are
telling me that the idle air controller motor is sticking and needs to be replaced. They are estimating $185 for the repair. I am no mechanic, but I have been told that this is easy to replace. Anybody got any info or ideas? Thanks. Doug |
Re: "Target Idle RPM not reached" (t-200)
"Sticking" might be fixable with a few squirts of carburetor cleaner. I am
thinking that your shop might have a policy of replacing the entire unit, because it is a more reliable fix. Maybe you can find someone else, who is willing to clean it instead. Earle <dvrdn72@gmail.com> wrote in message news:1150335521.473863.226860@g10g2000cwb.googlegr oups.com... > I got a shop to read the error code and got this error. They are > telling me that the idle air controller motor is sticking and needs to > be replaced. They are estimating $185 for the repair. I am no mechanic, > but I have been told that this is easy to replace. Anybody got any info > or ideas? Thanks. > > Doug > |
Re: "Target Idle RPM not reached" (t-200)
"Sticking" might be fixable with a few squirts of carburetor cleaner. I am
thinking that your shop might have a policy of replacing the entire unit, because it is a more reliable fix. Maybe you can find someone else, who is willing to clean it instead. Earle <dvrdn72@gmail.com> wrote in message news:1150335521.473863.226860@g10g2000cwb.googlegr oups.com... > I got a shop to read the error code and got this error. They are > telling me that the idle air controller motor is sticking and needs to > be replaced. They are estimating $185 for the repair. I am no mechanic, > but I have been told that this is easy to replace. Anybody got any info > or ideas? Thanks. > > Doug > |
Re: "Target Idle RPM not reached" (t-200)
"Sticking" might be fixable with a few squirts of carburetor cleaner. I am
thinking that your shop might have a policy of replacing the entire unit, because it is a more reliable fix. Maybe you can find someone else, who is willing to clean it instead. Earle <dvrdn72@gmail.com> wrote in message news:1150335521.473863.226860@g10g2000cwb.googlegr oups.com... > I got a shop to read the error code and got this error. They are > telling me that the idle air controller motor is sticking and needs to > be replaced. They are estimating $185 for the repair. I am no mechanic, > but I have been told that this is easy to replace. Anybody got any info > or ideas? Thanks. > > Doug > |
Re: "Target Idle RPM not reached" (t-200)
dvrdn72 did pass the time by typing:
> I got a shop to read the error code and got this error. They are > telling me that the idle air controller motor is sticking and needs to > be replaced. They are estimating $185 for the repair. I am no mechanic, > but I have been told that this is easy to replace. Anybody got any info > or ideas? Thanks. soooper easy. http://revbeergoggles.com/tb/tb.html NAPA has them Idle Air Control Valve 21856 53007562 $48.99 Best thing to do is to clean it first with some TB cleaner. Be careful of the gasket. If you rip it you will need a new one. And don't pull on the pintle (pointy thing that sticks out of the coil). -- DougW |
Re: "Target Idle RPM not reached" (t-200)
dvrdn72 did pass the time by typing:
> I got a shop to read the error code and got this error. They are > telling me that the idle air controller motor is sticking and needs to > be replaced. They are estimating $185 for the repair. I am no mechanic, > but I have been told that this is easy to replace. Anybody got any info > or ideas? Thanks. soooper easy. http://revbeergoggles.com/tb/tb.html NAPA has them Idle Air Control Valve 21856 53007562 $48.99 Best thing to do is to clean it first with some TB cleaner. Be careful of the gasket. If you rip it you will need a new one. And don't pull on the pintle (pointy thing that sticks out of the coil). -- DougW |
Re: "Target Idle RPM not reached" (t-200)
dvrdn72 did pass the time by typing:
> I got a shop to read the error code and got this error. They are > telling me that the idle air controller motor is sticking and needs to > be replaced. They are estimating $185 for the repair. I am no mechanic, > but I have been told that this is easy to replace. Anybody got any info > or ideas? Thanks. soooper easy. http://revbeergoggles.com/tb/tb.html NAPA has them Idle Air Control Valve 21856 53007562 $48.99 Best thing to do is to clean it first with some TB cleaner. Be careful of the gasket. If you rip it you will need a new one. And don't pull on the pintle (pointy thing that sticks out of the coil). -- DougW |
All times are GMT -4. The time now is 03:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands