Taking a break
04-10-2004, 12:59 AM
#11
Guest
Posts: n/a
Re: Taking a break
Well, most of the stuff is off.
I'm amazed, thought the intake and exhaust bolts would be
a real pain. Even shot them with a touch of PB Blaster.
Just for grins I took the box wrench to them and off they
came.
...yawn..
more tomorow.. me sleepy.
--
DougW
I'm amazed, thought the intake and exhaust bolts would be
a real pain. Even shot them with a touch of PB Blaster.
Just for grins I took the box wrench to them and off they
came.
...yawn..
more tomorow.. me sleepy.
--
DougW
04-10-2004, 12:59 AM
#12
Guest
Posts: n/a
Re: Taking a break
Well, most of the stuff is off.
I'm amazed, thought the intake and exhaust bolts would be
a real pain. Even shot them with a touch of PB Blaster.
Just for grins I took the box wrench to them and off they
came.
...yawn..
more tomorow.. me sleepy.
--
DougW
I'm amazed, thought the intake and exhaust bolts would be
a real pain. Even shot them with a touch of PB Blaster.
Just for grins I took the box wrench to them and off they
came.
...yawn..
more tomorow.. me sleepy.
--
DougW
04-10-2004, 12:59 AM
#13
Guest
Posts: n/a
Re: Taking a break
Well, most of the stuff is off.
I'm amazed, thought the intake and exhaust bolts would be
a real pain. Even shot them with a touch of PB Blaster.
Just for grins I took the box wrench to them and off they
came.
...yawn..
more tomorow.. me sleepy.
--
DougW
I'm amazed, thought the intake and exhaust bolts would be
a real pain. Even shot them with a touch of PB Blaster.
Just for grins I took the box wrench to them and off they
came.
...yawn..
more tomorow.. me sleepy.
--
DougW
04-10-2004, 11:00 AM
#14
Guest
Posts: n/a
Re: Taking a break
"Oh well, breaks over.. back on my head."
HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!
Pilgrim
"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!
Pilgrim
"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
04-10-2004, 11:00 AM
#15
Guest
Posts: n/a
Re: Taking a break
"Oh well, breaks over.. back on my head."
HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!
Pilgrim
"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!
Pilgrim
"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
04-10-2004, 11:00 AM
#16
Guest
Posts: n/a
Re: Taking a break
"Oh well, breaks over.. back on my head."
HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!
Pilgrim
"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!
Pilgrim
"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
04-10-2004, 11:00 AM
#17
Guest
Posts: n/a
Re: Taking a break
"Oh well, breaks over.. back on my head."
HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!
Pilgrim
"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!
Pilgrim
"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
