Well, most of the stuff is off.

I'm amazed, thought the intake and exhaust bolts would be
a real pain. Even shot them with a touch of PB Blaster.

Just for grins I took the box wrench to them and off they
came.

...yawn..

more tomorow.. me sleepy.

--
DougW

 

Well, most of the stuff is off.

I'm amazed, thought the intake and exhaust bolts would be
a real pain. Even shot them with a touch of PB Blaster.

Just for grins I took the box wrench to them and off they
came.

...yawn..

more tomorow.. me sleepy.

--
DougW

 

Well, most of the stuff is off.

I'm amazed, thought the intake and exhaust bolts would be
a real pain. Even shot them with a touch of PB Blaster.

Just for grins I took the box wrench to them and off they
came.

...yawn..

more tomorow.. me sleepy.

--
DougW

 

"Oh well, breaks over.. back on my head."

HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!

Pilgrim

"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

 

"Oh well, breaks over.. back on my head."

HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!

Pilgrim

"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

 

"Oh well, breaks over.. back on my head."

HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!

Pilgrim

"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

 

"Oh well, breaks over.. back on my head."

HeHeHe. Say it to my employees all the time. I don't think they know the
joke though!!!

Pilgrim

"DougW" <post.replies@invalid.address> wrote in message
news:eqIdc.268$fS6.79@okepread01...
> Man oh man....
>
> Got the supercharger off and wow are all the vacuum hoses
> shot! Most of the factory stuff has gone soft and the aftermarket
> rubber has turned hard as rock. Too bad things move or I'd simply
> replumb with hard lines and not worry about future leaks. :)
>
> At least the source of vac leaks are obvious when you have to
> remove all the plumbing.
>
> Speaking thereof, I probably should replace the CCV hoses or at least
> clean them out. The gaskets look a bit iffy. Then there is that
> tiny valve cover leak. (Hey, just how deep is this hole?)
>
> On the subject of removing old formagasket stuff I found a light switch
> plate works well. Nice sharp plastic edge and fits well in the hand yet
> won't scratch the aluminum castings.
>
> mmm.. coffee...
>
> A few more minutes and I'll be after the electricals and then
> comes the intake/exhaust bolts.
>
> And that will be it for tonight.
>
> Might do a few before/after photos but going for detail I think would
> drag this exercise way too far out. Besides most folks know what a
> bolt looks like and that's all it is really. :)
>
> mmm.. coffee...
>
> Oh well, breaks over.. back on my head.
>
> Got to build the shopping list. I've got some bike riding to do
> tomorrow. :) Nah, just kidding, Car#2 runs but it would be a good
> excuse to get some exercise.
>
> --
> DougW
> (and his b0rked ZJ)
>
>




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----