I got a pin from http://www.morris4x4center.com/cj5/t176.htm , Part #
8132407. here is a picture of the pin:
http://www.t3e871.rchomepage.com/ngpics/176pin.jpg

Now the problem is, it doesn't seem to fit. If you can see the aluminum
colored paint on the pin in the picture, thats how far it goes in by tapping
it gently. I'm afraid I'll bust the shift tower if I go any harder. The
other pin thats still in the tranny doesn't have the head on it...are they
supposed to have the head or do they go into the shift tower completly?

--
_____________________
HomeBrewer
76-81-85CJ7
http://85cj7.blogspot.com/
All in one Jeep

"JimG" <jimg@2muchspam.com> wrote in message
news:Uu7wd.8204$2O6.6308@news01.roc.ny...
> Not right off hand... odd piece maybe. Boneyard? $teeler? Not sure.
>
> "HomeBrewer" wrote in message ...
>> Damn, I guess it's missing a pin - know where to get on online?
>>
>> --
>
>

 

That is what mine looks like. Did you remove the spring loaded twist cap?
If not you need to. The pin should go flush to the start of the head.

--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries

00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift

"HomeBrewer" wrote in message ...
> I got a pin from http://www.morris4x4center.com/cj5/t176.htm , Part #
> 8132407. here is a picture of the pin:
> http://www.t3e871.rchomepage.com/ngpics/176pin.jpg
>
> Now the problem is, it doesn't seem to fit. If you can see the aluminum
> colored paint on the pin in the picture, thats how far it goes in by
tapping
> it gently. I'm afraid I'll bust the shift tower if I go any harder. The
> other pin thats still in the tranny doesn't have the head on it...are they
> supposed to have the head or do they go into the shift tower completly?
>

 

That is what mine looks like. Did you remove the spring loaded twist cap?
If not you need to. The pin should go flush to the start of the head.

--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries

00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift

"HomeBrewer" wrote in message ...
> I got a pin from http://www.morris4x4center.com/cj5/t176.htm , Part #
> 8132407. here is a picture of the pin:
> http://www.t3e871.rchomepage.com/ngpics/176pin.jpg
>
> Now the problem is, it doesn't seem to fit. If you can see the aluminum
> colored paint on the pin in the picture, thats how far it goes in by
tapping
> it gently. I'm afraid I'll bust the shift tower if I go any harder. The
> other pin thats still in the tranny doesn't have the head on it...are they
> supposed to have the head or do they go into the shift tower completly?
>

 

That is what mine looks like. Did you remove the spring loaded twist cap?
If not you need to. The pin should go flush to the start of the head.

--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries

00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift

"HomeBrewer" wrote in message ...
> I got a pin from http://www.morris4x4center.com/cj5/t176.htm , Part #
> 8132407. here is a picture of the pin:
> http://www.t3e871.rchomepage.com/ngpics/176pin.jpg
>
> Now the problem is, it doesn't seem to fit. If you can see the aluminum
> colored paint on the pin in the picture, thats how far it goes in by
tapping
> it gently. I'm afraid I'll bust the shift tower if I go any harder. The
> other pin thats still in the tranny doesn't have the head on it...are they
> supposed to have the head or do they go into the shift tower completly?
>