Stuck door!
07-05-2003, 05:43 PM
#1
Guest
Posts: n/a
Stuck door!
I went out to take my full doors off today, and the passenger one won't come
off! Yes, I did take off both nuts.... The driver's door came off with a
bit of grunting (man those things are heavier than I expected), but the
passenger's side won't budge. Looks like I can lift it about 1/8" and it
stops. I pulled on it hard enough to rock my TJ as far as I could lift it,
and nothing.
Anyone have any tips on this? It's insanely hot out right now and I figure
the more wind that hits me, the better!
Eric
99 TJ SE
off! Yes, I did take off both nuts.... The driver's door came off with a
bit of grunting (man those things are heavier than I expected), but the
passenger's side won't budge. Looks like I can lift it about 1/8" and it
stops. I pulled on it hard enough to rock my TJ as far as I could lift it,
and nothing.
Anyone have any tips on this? It's insanely hot out right now and I figure
the more wind that hits me, the better!
Eric
99 TJ SE
07-05-2003, 07:14 PM
#2
Guest
Posts: n/a
Re: Stuck door!
Try some oil on the hinges and swing the door open and closed while
lifting.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric Bailey wrote:
>
> I went out to take my full doors off today, and the passenger one won't come
> off! Yes, I did take off both nuts.... The driver's door came off with a
> bit of grunting (man those things are heavier than I expected), but the
> passenger's side won't budge. Looks like I can lift it about 1/8" and it
> stops. I pulled on it hard enough to rock my TJ as far as I could lift it,
> and nothing.
>
> Anyone have any tips on this? It's insanely hot out right now and I figure
> the more wind that hits me, the better!
>
> Eric
> 99 TJ SE
lifting.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric Bailey wrote:
>
> I went out to take my full doors off today, and the passenger one won't come
> off! Yes, I did take off both nuts.... The driver's door came off with a
> bit of grunting (man those things are heavier than I expected), but the
> passenger's side won't budge. Looks like I can lift it about 1/8" and it
> stops. I pulled on it hard enough to rock my TJ as far as I could lift it,
> and nothing.
>
> Anyone have any tips on this? It's insanely hot out right now and I figure
> the more wind that hits me, the better!
>
> Eric
> 99 TJ SE
07-05-2003, 08:22 PM
#3
Guest
Posts: n/a
Re: Stuck door!
And next time, follow the recommendation in the owner's manual about
lubricating the hinges with engine oil. ;o)
Earle
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F075BED.D51489F5@sympatico.ca...
> Try some oil on the hinges and swing the door open and closed while
> lifting.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Eric Bailey wrote:
> >
> > I went out to take my full doors off today, and the passenger one won't
come
> > off! Yes, I did take off both nuts.... The driver's door came off with
a
> > bit of grunting (man those things are heavier than I expected), but the
> > passenger's side won't budge. Looks like I can lift it about 1/8" and
it
> > stops. I pulled on it hard enough to rock my TJ as far as I could lift
it,
> > and nothing.
> >
> > Anyone have any tips on this? It's insanely hot out right now and I
figure
> > the more wind that hits me, the better!
> >
> > Eric
> > 99 TJ SE
lubricating the hinges with engine oil. ;o)
Earle
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F075BED.D51489F5@sympatico.ca...
> Try some oil on the hinges and swing the door open and closed while
> lifting.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Eric Bailey wrote:
> >
> > I went out to take my full doors off today, and the passenger one won't
come
> > off! Yes, I did take off both nuts.... The driver's door came off with
a
> > bit of grunting (man those things are heavier than I expected), but the
> > passenger's side won't budge. Looks like I can lift it about 1/8" and
it
> > stops. I pulled on it hard enough to rock my TJ as far as I could lift
it,
> > and nothing.
> >
> > Anyone have any tips on this? It's insanely hot out right now and I
figure
> > the more wind that hits me, the better!
> >
> > Eric
> > 99 TJ SE
07-05-2003, 11:40 PM
#4
Guest
Posts: n/a
Re: Stuck door!
If that doesn't work, simply get out a dremel and grind off the hinges! You
don't need no stinking doors!!
Very effective!! ;-)
Ed
'79 CJ5 34's locked and rocked
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F075BED.D51489F5@sympatico.ca...
> Try some oil on the hinges and swing the door open and closed while
> lifting.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Eric Bailey wrote:
> >
> > I went out to take my full doors off today, and the passenger one won't
come
> > off! Yes, I did take off both nuts.... The driver's door came off with
a
> > bit of grunting (man those things are heavier than I expected), but the
> > passenger's side won't budge. Looks like I can lift it about 1/8" and
it
> > stops. I pulled on it hard enough to rock my TJ as far as I could lift
it,
> > and nothing.
> >
> > Anyone have any tips on this? It's insanely hot out right now and I
figure
> > the more wind that hits me, the better!
> >
> > Eric
> > 99 TJ SE
>
don't need no stinking doors!!
Very effective!! ;-)
Ed
'79 CJ5 34's locked and rocked
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F075BED.D51489F5@sympatico.ca...
> Try some oil on the hinges and swing the door open and closed while
> lifting.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Eric Bailey wrote:
> >
> > I went out to take my full doors off today, and the passenger one won't
come
> > off! Yes, I did take off both nuts.... The driver's door came off with
a
> > bit of grunting (man those things are heavier than I expected), but the
> > passenger's side won't budge. Looks like I can lift it about 1/8" and
it
> > stops. I pulled on it hard enough to rock my TJ as far as I could lift
it,
> > and nothing.
> >
> > Anyone have any tips on this? It's insanely hot out right now and I
figure
> > the more wind that hits me, the better!
> >
> > Eric
> > 99 TJ SE
>
07-05-2003, 11:52 PM
#5
Guest
Posts: n/a
Re: Stuck door!
For those first time removed (or first time after a long winter) doors, it
is much easier and with less strain if you get a scrap piece of 2X4, stand
it on end on top of a floor jack and slide the whole thing under the door.
Line it all up and jack. The top pin is longer than the bottom pin so once
the bottom pin is free you have about 1/4 inch left in the top. (Not only is
this so that the nut can attach to the pin but assists lining the pins up
when putting the doors back on by yourself). Make sure that you 1.) have the
door open about 1/2 of it's swing to make sure it clears the windshield
frame and 2.) have the "lifting contraption" positioned near the front of
the door so that the lifting force is sliding the pins out and not bending
the door.
One final thought, it is Fed regulation that there be a mirror on the
drivers side. You can probably get away without it but those cops can be
MF's when they want to.
"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> And next time, follow the recommendation in the owner's manual about
> lubricating the hinges with engine oil. ;o)
>
> Earle
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3F075BED.D51489F5@sympatico.ca...
> > Try some oil on the hinges and swing the door open and closed while
> > lifting.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Eric Bailey wrote:
> > >
> > > I went out to take my full doors off today, and the passenger one
won't
> come
> > > off! Yes, I did take off both nuts.... The driver's door came off
with
> a
> > > bit of grunting (man those things are heavier than I expected), but
the
> > > passenger's side won't budge. Looks like I can lift it about 1/8" and
> it
> > > stops. I pulled on it hard enough to rock my TJ as far as I could
lift
> it,
> > > and nothing.
> > >
> > > Anyone have any tips on this? It's insanely hot out right now and I
> figure
> > > the more wind that hits me, the better!
> > >
> > > Eric
> > > 99 TJ SE
>
>
is much easier and with less strain if you get a scrap piece of 2X4, stand
it on end on top of a floor jack and slide the whole thing under the door.
Line it all up and jack. The top pin is longer than the bottom pin so once
the bottom pin is free you have about 1/4 inch left in the top. (Not only is
this so that the nut can attach to the pin but assists lining the pins up
when putting the doors back on by yourself). Make sure that you 1.) have the
door open about 1/2 of it's swing to make sure it clears the windshield
frame and 2.) have the "lifting contraption" positioned near the front of
the door so that the lifting force is sliding the pins out and not bending
the door.
One final thought, it is Fed regulation that there be a mirror on the
drivers side. You can probably get away without it but those cops can be
MF's when they want to.
"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> And next time, follow the recommendation in the owner's manual about
> lubricating the hinges with engine oil. ;o)
>
> Earle
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3F075BED.D51489F5@sympatico.ca...
> > Try some oil on the hinges and swing the door open and closed while
> > lifting.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Eric Bailey wrote:
> > >
> > > I went out to take my full doors off today, and the passenger one
won't
> come
> > > off! Yes, I did take off both nuts.... The driver's door came off
with
> a
> > > bit of grunting (man those things are heavier than I expected), but
the
> > > passenger's side won't budge. Looks like I can lift it about 1/8" and
> it
> > > stops. I pulled on it hard enough to rock my TJ as far as I could
lift
> it,
> > > and nothing.
> > >
> > > Anyone have any tips on this? It's insanely hot out right now and I
> figure
> > > the more wind that hits me, the better!
> > >
> > > Eric
> > > 99 TJ SE
>
>
07-06-2003, 11:22 AM
#6
Guest
Posts: n/a
Re: Stuck door!
If you need a mirror, a Honda motorcycle mirror fits perfect into the
hinge hole with the door off. Cheap, easy and it doesn't vibrate.
Mike
Christopher Reynolds wrote:
>
> For those first time removed (or first time after a long winter) doors, it
> is much easier and with less strain if you get a scrap piece of 2X4, stand
> it on end on top of a floor jack and slide the whole thing under the door.
> Line it all up and jack. The top pin is longer than the bottom pin so once
> the bottom pin is free you have about 1/4 inch left in the top. (Not only is
> this so that the nut can attach to the pin but assists lining the pins up
> when putting the doors back on by yourself). Make sure that you 1.) have the
> door open about 1/2 of it's swing to make sure it clears the windshield
> frame and 2.) have the "lifting contraption" positioned near the front of
> the door so that the lifting force is sliding the pins out and not bending
> the door.
>
> One final thought, it is Fed regulation that there be a mirror on the
> drivers side. You can probably get away without it but those cops can be
> MF's when they want to.
>
> "Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
> news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> > And next time, follow the recommendation in the owner's manual about
> > lubricating the hinges with engine oil. ;o)
> >
> > Earle
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3F075BED.D51489F5@sympatico.ca...
> > > Try some oil on the hinges and swing the door open and closed while
> > > lifting.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Eric Bailey wrote:
> > > >
> > > > I went out to take my full doors off today, and the passenger one
> won't
> > come
> > > > off! Yes, I did take off both nuts.... The driver's door came off
> with
> > a
> > > > bit of grunting (man those things are heavier than I expected), but
> the
> > > > passenger's side won't budge. Looks like I can lift it about 1/8" and
> > it
> > > > stops. I pulled on it hard enough to rock my TJ as far as I could
> lift
> > it,
> > > > and nothing.
> > > >
> > > > Anyone have any tips on this? It's insanely hot out right now and I
> > figure
> > > > the more wind that hits me, the better!
> > > >
> > > > Eric
> > > > 99 TJ SE
> >
> >
hinge hole with the door off. Cheap, easy and it doesn't vibrate.
Mike
Christopher Reynolds wrote:
>
> For those first time removed (or first time after a long winter) doors, it
> is much easier and with less strain if you get a scrap piece of 2X4, stand
> it on end on top of a floor jack and slide the whole thing under the door.
> Line it all up and jack. The top pin is longer than the bottom pin so once
> the bottom pin is free you have about 1/4 inch left in the top. (Not only is
> this so that the nut can attach to the pin but assists lining the pins up
> when putting the doors back on by yourself). Make sure that you 1.) have the
> door open about 1/2 of it's swing to make sure it clears the windshield
> frame and 2.) have the "lifting contraption" positioned near the front of
> the door so that the lifting force is sliding the pins out and not bending
> the door.
>
> One final thought, it is Fed regulation that there be a mirror on the
> drivers side. You can probably get away without it but those cops can be
> MF's when they want to.
>
> "Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
> news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> > And next time, follow the recommendation in the owner's manual about
> > lubricating the hinges with engine oil. ;o)
> >
> > Earle
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3F075BED.D51489F5@sympatico.ca...
> > > Try some oil on the hinges and swing the door open and closed while
> > > lifting.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Eric Bailey wrote:
> > > >
> > > > I went out to take my full doors off today, and the passenger one
> won't
> > come
> > > > off! Yes, I did take off both nuts.... The driver's door came off
> with
> > a
> > > > bit of grunting (man those things are heavier than I expected), but
> the
> > > > passenger's side won't budge. Looks like I can lift it about 1/8" and
> > it
> > > > stops. I pulled on it hard enough to rock my TJ as far as I could
> lift
> > it,
> > > > and nothing.
> > > >
> > > > Anyone have any tips on this? It's insanely hot out right now and I
> > figure
> > > > the more wind that hits me, the better!
> > > >
> > > > Eric
> > > > 99 TJ SE
> >
> >
07-06-2003, 12:02 PM
#7
Guest
Posts: n/a
Re: Stuck door!
Which model Honda mirror. All of the cycle shops around here (milwaukee) that
they don't have anything to fit.
Mike Romain wrote:
> If you need a mirror, a Honda motorcycle mirror fits perfect into the
> hinge hole with the door off. Cheap, easy and it doesn't vibrate.
>
> Mike
>
> Christopher Reynolds wrote:
> >
> > For those first time removed (or first time after a long winter) doors, it
> > is much easier and with less strain if you get a scrap piece of 2X4, stand
> > it on end on top of a floor jack and slide the whole thing under the door.
> > Line it all up and jack. The top pin is longer than the bottom pin so once
> > the bottom pin is free you have about 1/4 inch left in the top. (Not only is
> > this so that the nut can attach to the pin but assists lining the pins up
> > when putting the doors back on by yourself). Make sure that you 1.) have the
> > door open about 1/2 of it's swing to make sure it clears the windshield
> > frame and 2.) have the "lifting contraption" positioned near the front of
> > the door so that the lifting force is sliding the pins out and not bending
> > the door.
> >
> > One final thought, it is Fed regulation that there be a mirror on the
> > drivers side. You can probably get away without it but those cops can be
> > MF's when they want to.
> >
> > "Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
> > news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> > > And next time, follow the recommendation in the owner's manual about
> > > lubricating the hinges with engine oil. ;o)
> > >
> > > Earle
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3F075BED.D51489F5@sympatico.ca...
> > > > Try some oil on the hinges and swing the door open and closed while
> > > > lifting.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > Eric Bailey wrote:
> > > > >
> > > > > I went out to take my full doors off today, and the passenger one
> > won't
> > > come
> > > > > off! Yes, I did take off both nuts.... The driver's door came off
> > with
> > > a
> > > > > bit of grunting (man those things are heavier than I expected), but
> > the
> > > > > passenger's side won't budge. Looks like I can lift it about 1/8" and
> > > it
> > > > > stops. I pulled on it hard enough to rock my TJ as far as I could
> > lift
> > > it,
> > > > > and nothing.
> > > > >
> > > > > Anyone have any tips on this? It's insanely hot out right now and I
> > > figure
> > > > > the more wind that hits me, the better!
> > > > >
> > > > > Eric
> > > > > 99 TJ SE
> > >
> > >
--
Chad
Remove MY.APENDIX to reply
http://home.wi.rr.com/sylvanis/index.html
95 YJ RIP
02 TJ Sport Work in progress (His)
99 WJ Limited (Hers)
http://home.wi.rr.com/sylvanis/jeep.html
" A computer lets you make more mistakes faster than any invention in human
history. With the possible exceptions of handguns and tequila." Mitch Ratcliffe
they don't have anything to fit.
Mike Romain wrote:
> If you need a mirror, a Honda motorcycle mirror fits perfect into the
> hinge hole with the door off. Cheap, easy and it doesn't vibrate.
>
> Mike
>
> Christopher Reynolds wrote:
> >
> > For those first time removed (or first time after a long winter) doors, it
> > is much easier and with less strain if you get a scrap piece of 2X4, stand
> > it on end on top of a floor jack and slide the whole thing under the door.
> > Line it all up and jack. The top pin is longer than the bottom pin so once
> > the bottom pin is free you have about 1/4 inch left in the top. (Not only is
> > this so that the nut can attach to the pin but assists lining the pins up
> > when putting the doors back on by yourself). Make sure that you 1.) have the
> > door open about 1/2 of it's swing to make sure it clears the windshield
> > frame and 2.) have the "lifting contraption" positioned near the front of
> > the door so that the lifting force is sliding the pins out and not bending
> > the door.
> >
> > One final thought, it is Fed regulation that there be a mirror on the
> > drivers side. You can probably get away without it but those cops can be
> > MF's when they want to.
> >
> > "Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
> > news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> > > And next time, follow the recommendation in the owner's manual about
> > > lubricating the hinges with engine oil. ;o)
> > >
> > > Earle
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3F075BED.D51489F5@sympatico.ca...
> > > > Try some oil on the hinges and swing the door open and closed while
> > > > lifting.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > Eric Bailey wrote:
> > > > >
> > > > > I went out to take my full doors off today, and the passenger one
> > won't
> > > come
> > > > > off! Yes, I did take off both nuts.... The driver's door came off
> > with
> > > a
> > > > > bit of grunting (man those things are heavier than I expected), but
> > the
> > > > > passenger's side won't budge. Looks like I can lift it about 1/8" and
> > > it
> > > > > stops. I pulled on it hard enough to rock my TJ as far as I could
> > lift
> > > it,
> > > > > and nothing.
> > > > >
> > > > > Anyone have any tips on this? It's insanely hot out right now and I
> > > figure
> > > > > the more wind that hits me, the better!
> > > > >
> > > > > Eric
> > > > > 99 TJ SE
> > >
> > >
--
Chad
Remove MY.APENDIX to reply
http://home.wi.rr.com/sylvanis/index.html
95 YJ RIP
02 TJ Sport Work in progress (His)
99 WJ Limited (Hers)
http://home.wi.rr.com/sylvanis/jeep.html
" A computer lets you make more mistakes faster than any invention in human
history. With the possible exceptions of handguns and tequila." Mitch Ratcliffe
07-06-2003, 12:13 PM
#8
Guest
Posts: n/a
Re: Stuck door!
I use Baja doors to keep the big pieces of dust out and empty pop cans in.
Since there is no place to put motorcycle mirrors, I have CJ mirrors mounted
on the windshield hinges. When driving down a gravel road what is in the
mirrors reminds me of some of the pharmaceuticals I took when I was (much)
younger.
Earle
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F083E9C.189DE499@sympatico.ca...
> If you need a mirror, a Honda motorcycle mirror fits perfect into the
> hinge hole with the door off. Cheap, easy and it doesn't vibrate.
>
> Mike
>
>
> Christopher Reynolds wrote:
> >
> > For those first time removed (or first time after a long winter) doors,
it
> > is much easier and with less strain if you get a scrap piece of 2X4,
stand
> > it on end on top of a floor jack and slide the whole thing under the
door.
> > Line it all up and jack. The top pin is longer than the bottom pin so
once
> > the bottom pin is free you have about 1/4 inch left in the top. (Not
only is
> > this so that the nut can attach to the pin but assists lining the pins
up
> > when putting the doors back on by yourself). Make sure that you 1.) have
the
> > door open about 1/2 of it's swing to make sure it clears the windshield
> > frame and 2.) have the "lifting contraption" positioned near the front
of
> > the door so that the lifting force is sliding the pins out and not
bending
> > the door.
> >
> > One final thought, it is Fed regulation that there be a mirror on the
> > drivers side. You can probably get away without it but those cops can be
> > MF's when they want to.
> >
> > "Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
message
> > news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> > > And next time, follow the recommendation in the owner's manual about
> > > lubricating the hinges with engine oil. ;o)
> > >
> > > Earle
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3F075BED.D51489F5@sympatico.ca...
> > > > Try some oil on the hinges and swing the door open and closed while
> > > > lifting.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > Eric Bailey wrote:
> > > > >
> > > > > I went out to take my full doors off today, and the passenger one
> > won't
> > > come
> > > > > off! Yes, I did take off both nuts.... The driver's door came
off
> > with
> > > a
> > > > > bit of grunting (man those things are heavier than I expected),
but
> > the
> > > > > passenger's side won't budge. Looks like I can lift it about 1/8"
and
> > > it
> > > > > stops. I pulled on it hard enough to rock my TJ as far as I could
> > lift
> > > it,
> > > > > and nothing.
> > > > >
> > > > > Anyone have any tips on this? It's insanely hot out right now and
I
> > > figure
> > > > > the more wind that hits me, the better!
> > > > >
> > > > > Eric
> > > > > 99 TJ SE
> > >
> > >
Since there is no place to put motorcycle mirrors, I have CJ mirrors mounted
on the windshield hinges. When driving down a gravel road what is in the
mirrors reminds me of some of the pharmaceuticals I took when I was (much)
younger.
Earle
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F083E9C.189DE499@sympatico.ca...
> If you need a mirror, a Honda motorcycle mirror fits perfect into the
> hinge hole with the door off. Cheap, easy and it doesn't vibrate.
>
> Mike
>
>
> Christopher Reynolds wrote:
> >
> > For those first time removed (or first time after a long winter) doors,
it
> > is much easier and with less strain if you get a scrap piece of 2X4,
stand
> > it on end on top of a floor jack and slide the whole thing under the
door.
> > Line it all up and jack. The top pin is longer than the bottom pin so
once
> > the bottom pin is free you have about 1/4 inch left in the top. (Not
only is
> > this so that the nut can attach to the pin but assists lining the pins
up
> > when putting the doors back on by yourself). Make sure that you 1.) have
the
> > door open about 1/2 of it's swing to make sure it clears the windshield
> > frame and 2.) have the "lifting contraption" positioned near the front
of
> > the door so that the lifting force is sliding the pins out and not
bending
> > the door.
> >
> > One final thought, it is Fed regulation that there be a mirror on the
> > drivers side. You can probably get away without it but those cops can be
> > MF's when they want to.
> >
> > "Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
message
> > news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> > > And next time, follow the recommendation in the owner's manual about
> > > lubricating the hinges with engine oil. ;o)
> > >
> > > Earle
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3F075BED.D51489F5@sympatico.ca...
> > > > Try some oil on the hinges and swing the door open and closed while
> > > > lifting.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > Eric Bailey wrote:
> > > > >
> > > > > I went out to take my full doors off today, and the passenger one
> > won't
> > > come
> > > > > off! Yes, I did take off both nuts.... The driver's door came
off
> > with
> > > a
> > > > > bit of grunting (man those things are heavier than I expected),
but
> > the
> > > > > passenger's side won't budge. Looks like I can lift it about 1/8"
and
> > > it
> > > > > stops. I pulled on it hard enough to rock my TJ as far as I could
> > lift
> > > it,
> > > > > and nothing.
> > > > >
> > > > > Anyone have any tips on this? It's insanely hot out right now and
I
> > > figure
> > > > > the more wind that hits me, the better!
> > > > >
> > > > > Eric
> > > > > 99 TJ SE
> > >
> > >
07-06-2003, 01:54 PM
#9
Guest
Posts: n/a
Re: Stuck door!
Have to ask Steve Seppala, he has a set on.
I forwarded this to him.
Mike
Chad Fraker wrote:
>
> Which model Honda mirror. All of the cycle shops around here (milwaukee) that
> they don't have anything to fit.
>
> Mike Romain wrote:
>
> > If you need a mirror, a Honda motorcycle mirror fits perfect into the
> > hinge hole with the door off. Cheap, easy and it doesn't vibrate.
> >
> > Mike
> >
> > Christopher Reynolds wrote:
> > >
> > > For those first time removed (or first time after a long winter) doors, it
> > > is much easier and with less strain if you get a scrap piece of 2X4, stand
> > > it on end on top of a floor jack and slide the whole thing under the door.
> > > Line it all up and jack. The top pin is longer than the bottom pin so once
> > > the bottom pin is free you have about 1/4 inch left in the top. (Not only is
> > > this so that the nut can attach to the pin but assists lining the pins up
> > > when putting the doors back on by yourself). Make sure that you 1.) have the
> > > door open about 1/2 of it's swing to make sure it clears the windshield
> > > frame and 2.) have the "lifting contraption" positioned near the front of
> > > the door so that the lifting force is sliding the pins out and not bending
> > > the door.
> > >
> > > One final thought, it is Fed regulation that there be a mirror on the
> > > drivers side. You can probably get away without it but those cops can be
> > > MF's when they want to.
> > >
> > > "Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
> > > news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> > > > And next time, follow the recommendation in the owner's manual about
> > > > lubricating the hinges with engine oil. ;o)
> > > >
> > > > Earle
> > > >
> > > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > > news:3F075BED.D51489F5@sympatico.ca...
> > > > > Try some oil on the hinges and swing the door open and closed while
> > > > > lifting.
> > > > >
> > > > > Mike
> > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > 88 Cherokee 235 BFG AT's
> > > > >
> > > > > Eric Bailey wrote:
> > > > > >
> > > > > > I went out to take my full doors off today, and the passenger one
> > > won't
> > > > come
> > > > > > off! Yes, I did take off both nuts.... The driver's door came off
> > > with
> > > > a
> > > > > > bit of grunting (man those things are heavier than I expected), but
> > > the
> > > > > > passenger's side won't budge. Looks like I can lift it about 1/8" and
> > > > it
> > > > > > stops. I pulled on it hard enough to rock my TJ as far as I could
> > > lift
> > > > it,
> > > > > > and nothing.
> > > > > >
> > > > > > Anyone have any tips on this? It's insanely hot out right now and I
> > > > figure
> > > > > > the more wind that hits me, the better!
> > > > > >
> > > > > > Eric
> > > > > > 99 TJ SE
> > > >
> > > >
>
> --
> Chad
> Remove MY.APENDIX to reply
> http://home.wi.rr.com/sylvanis/index.html
>
> 95 YJ RIP
> 02 TJ Sport Work in progress (His)
> 99 WJ Limited (Hers)
> http://home.wi.rr.com/sylvanis/jeep.html
>
> " A computer lets you make more mistakes faster than any invention in human
> history. With the possible exceptions of handguns and tequila." Mitch Ratcliffe
I forwarded this to him.
Mike
Chad Fraker wrote:
>
> Which model Honda mirror. All of the cycle shops around here (milwaukee) that
> they don't have anything to fit.
>
> Mike Romain wrote:
>
> > If you need a mirror, a Honda motorcycle mirror fits perfect into the
> > hinge hole with the door off. Cheap, easy and it doesn't vibrate.
> >
> > Mike
> >
> > Christopher Reynolds wrote:
> > >
> > > For those first time removed (or first time after a long winter) doors, it
> > > is much easier and with less strain if you get a scrap piece of 2X4, stand
> > > it on end on top of a floor jack and slide the whole thing under the door.
> > > Line it all up and jack. The top pin is longer than the bottom pin so once
> > > the bottom pin is free you have about 1/4 inch left in the top. (Not only is
> > > this so that the nut can attach to the pin but assists lining the pins up
> > > when putting the doors back on by yourself). Make sure that you 1.) have the
> > > door open about 1/2 of it's swing to make sure it clears the windshield
> > > frame and 2.) have the "lifting contraption" positioned near the front of
> > > the door so that the lifting force is sliding the pins out and not bending
> > > the door.
> > >
> > > One final thought, it is Fed regulation that there be a mirror on the
> > > drivers side. You can probably get away without it but those cops can be
> > > MF's when they want to.
> > >
> > > "Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
> > > news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> > > > And next time, follow the recommendation in the owner's manual about
> > > > lubricating the hinges with engine oil. ;o)
> > > >
> > > > Earle
> > > >
> > > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > > news:3F075BED.D51489F5@sympatico.ca...
> > > > > Try some oil on the hinges and swing the door open and closed while
> > > > > lifting.
> > > > >
> > > > > Mike
> > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > 88 Cherokee 235 BFG AT's
> > > > >
> > > > > Eric Bailey wrote:
> > > > > >
> > > > > > I went out to take my full doors off today, and the passenger one
> > > won't
> > > > come
> > > > > > off! Yes, I did take off both nuts.... The driver's door came off
> > > with
> > > > a
> > > > > > bit of grunting (man those things are heavier than I expected), but
> > > the
> > > > > > passenger's side won't budge. Looks like I can lift it about 1/8" and
> > > > it
> > > > > > stops. I pulled on it hard enough to rock my TJ as far as I could
> > > lift
> > > > it,
> > > > > > and nothing.
> > > > > >
> > > > > > Anyone have any tips on this? It's insanely hot out right now and I
> > > > figure
> > > > > > the more wind that hits me, the better!
> > > > > >
> > > > > > Eric
> > > > > > 99 TJ SE
> > > >
> > > >
>
> --
> Chad
> Remove MY.APENDIX to reply
> http://home.wi.rr.com/sylvanis/index.html
>
> 95 YJ RIP
> 02 TJ Sport Work in progress (His)
> 99 WJ Limited (Hers)
> http://home.wi.rr.com/sylvanis/jeep.html
>
> " A computer lets you make more mistakes faster than any invention in human
> history. With the possible exceptions of handguns and tequila." Mitch Ratcliffe
07-06-2003, 06:06 PM
#10
Guest
Posts: n/a
Re: Stuck door!
As for federal regulations, apparently those that patrol the streets in this
area are not aware of it. I've asked a couple of different patrol cops what
the rules were, and they said they didn't think there was anything that
specified one way or the other. That, and they said that they wouldn't
waste their time pulling a Jeep over just because it didn't have side
mirrors...
That, and in Texas, I know you only have to have the rearview mirror (law
says something about needing one mirror that allows you to see so many feet
behind you, and with the top off, the rearview does the job).
Eric
"Christopher Reynolds" <cd.reynolds@worldnet.att.net> wrote in message
news:b2NNa.41259$3o3.2761342@bgtnsc05-news.ops.worldnet.att.net...
> For those first time removed (or first time after a long winter) doors, it
> is much easier and with less strain if you get a scrap piece of 2X4, stand
> it on end on top of a floor jack and slide the whole thing under the door.
> Line it all up and jack. The top pin is longer than the bottom pin so once
> the bottom pin is free you have about 1/4 inch left in the top. (Not only
is
> this so that the nut can attach to the pin but assists lining the pins up
> when putting the doors back on by yourself). Make sure that you 1.) have
the
> door open about 1/2 of it's swing to make sure it clears the windshield
> frame and 2.) have the "lifting contraption" positioned near the front of
> the door so that the lifting force is sliding the pins out and not bending
> the door.
>
> One final thought, it is Fed regulation that there be a mirror on the
> drivers side. You can probably get away without it but those cops can be
> MF's when they want to.
>
> "Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
> news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> > And next time, follow the recommendation in the owner's manual about
> > lubricating the hinges with engine oil. ;o)
> >
> > Earle
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3F075BED.D51489F5@sympatico.ca...
> > > Try some oil on the hinges and swing the door open and closed while
> > > lifting.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Eric Bailey wrote:
> > > >
> > > > I went out to take my full doors off today, and the passenger one
> won't
> > come
> > > > off! Yes, I did take off both nuts.... The driver's door came off
> with
> > a
> > > > bit of grunting (man those things are heavier than I expected), but
> the
> > > > passenger's side won't budge. Looks like I can lift it about 1/8"
and
> > it
> > > > stops. I pulled on it hard enough to rock my TJ as far as I could
> lift
> > it,
> > > > and nothing.
> > > >
> > > > Anyone have any tips on this? It's insanely hot out right now and I
> > figure
> > > > the more wind that hits me, the better!
> > > >
> > > > Eric
> > > > 99 TJ SE
> >
> >
>
>
area are not aware of it. I've asked a couple of different patrol cops what
the rules were, and they said they didn't think there was anything that
specified one way or the other. That, and they said that they wouldn't
waste their time pulling a Jeep over just because it didn't have side
mirrors...
That, and in Texas, I know you only have to have the rearview mirror (law
says something about needing one mirror that allows you to see so many feet
behind you, and with the top off, the rearview does the job).
Eric
"Christopher Reynolds" <cd.reynolds@worldnet.att.net> wrote in message
news:b2NNa.41259$3o3.2761342@bgtnsc05-news.ops.worldnet.att.net...
> For those first time removed (or first time after a long winter) doors, it
> is much easier and with less strain if you get a scrap piece of 2X4, stand
> it on end on top of a floor jack and slide the whole thing under the door.
> Line it all up and jack. The top pin is longer than the bottom pin so once
> the bottom pin is free you have about 1/4 inch left in the top. (Not only
is
> this so that the nut can attach to the pin but assists lining the pins up
> when putting the doors back on by yourself). Make sure that you 1.) have
the
> door open about 1/2 of it's swing to make sure it clears the windshield
> frame and 2.) have the "lifting contraption" positioned near the front of
> the door so that the lifting force is sliding the pins out and not bending
> the door.
>
> One final thought, it is Fed regulation that there be a mirror on the
> drivers side. You can probably get away without it but those cops can be
> MF's when they want to.
>
> "Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
> news:be7pr0$270q2$1@ID-147790.news.dfncis.de...
> > And next time, follow the recommendation in the owner's manual about
> > lubricating the hinges with engine oil. ;o)
> >
> > Earle
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3F075BED.D51489F5@sympatico.ca...
> > > Try some oil on the hinges and swing the door open and closed while
> > > lifting.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Eric Bailey wrote:
> > > >
> > > > I went out to take my full doors off today, and the passenger one
> won't
> > come
> > > > off! Yes, I did take off both nuts.... The driver's door came off
> with
> > a
> > > > bit of grunting (man those things are heavier than I expected), but
> the
> > > > passenger's side won't budge. Looks like I can lift it about 1/8"
and
> > it
> > > > stops. I pulled on it hard enough to rock my TJ as far as I could
> lift
> > it,
> > > > and nothing.
> > > >
> > > > Anyone have any tips on this? It's insanely hot out right now and I
> > figure
> > > > the more wind that hits me, the better!
> > > >
> > > > Eric
> > > > 99 TJ SE
> >
> >
>
>
