Steering Shaft adjustment
03-14-2007, 02:56 PM
#1
Guest
Posts: n/a
Steering Shaft adjustment
Hi All,
Last weekend I removed the 3" body lift on my 99 Wrangler that the
previous owner put on. I'm noticing a problem with the steering shaft
now. I am getting rubbing on the fender from the bottom U-Joint.
Plus the U-joint has got a pretty good angle to it now. Does anyonw
know how to adjust the length of the steering shaft to reduce the
angle?
Thanks in advance.
Last weekend I removed the 3" body lift on my 99 Wrangler that the
previous owner put on. I'm noticing a problem with the steering shaft
now. I am getting rubbing on the fender from the bottom U-Joint.
Plus the U-joint has got a pretty good angle to it now. Does anyonw
know how to adjust the length of the steering shaft to reduce the
angle?
Thanks in advance.
03-14-2007, 04:13 PM
#2
Guest
Posts: n/a
Re: Steering Shaft adjustment
Jeff_p wrote:
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
>
On the older Jeeps, there was an impact cushion slip joint about half
way along the shaft. I would look there for signs it was slipped open.
Heat might be needed to slip it shorter.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
>
On the older Jeeps, there was an impact cushion slip joint about half
way along the shaft. I would look there for signs it was slipped open.
Heat might be needed to slip it shorter.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
03-14-2007, 04:13 PM
#3
Guest
Posts: n/a
Re: Steering Shaft adjustment
Jeff_p wrote:
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
>
On the older Jeeps, there was an impact cushion slip joint about half
way along the shaft. I would look there for signs it was slipped open.
Heat might be needed to slip it shorter.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
>
On the older Jeeps, there was an impact cushion slip joint about half
way along the shaft. I would look there for signs it was slipped open.
Heat might be needed to slip it shorter.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
03-14-2007, 04:13 PM
#4
Guest
Posts: n/a
Re: Steering Shaft adjustment
Jeff_p wrote:
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
>
On the older Jeeps, there was an impact cushion slip joint about half
way along the shaft. I would look there for signs it was slipped open.
Heat might be needed to slip it shorter.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
>
On the older Jeeps, there was an impact cushion slip joint about half
way along the shaft. I would look there for signs it was slipped open.
Heat might be needed to slip it shorter.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
03-14-2007, 06:32 PM
#5
Guest
Posts: n/a
Re: Steering Shaft adjustment
On Mar 14, 1:56 pm, "Jeff_p" <jeff.pr...@gmail.com> wrote:
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
I put a new one in a 95 Yj just last week. The shaft is telescoping
in the middle but it is hard to move. You will probably need to take
it out to get enough force on it to lengthen it. Also, the only way
to increase the distance between steering gear and steering column is
to move your steering wheel (and column) farther back into the drivers
seating area.
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
I put a new one in a 95 Yj just last week. The shaft is telescoping
in the middle but it is hard to move. You will probably need to take
it out to get enough force on it to lengthen it. Also, the only way
to increase the distance between steering gear and steering column is
to move your steering wheel (and column) farther back into the drivers
seating area.
03-14-2007, 06:32 PM
#6
Guest
Posts: n/a
Re: Steering Shaft adjustment
On Mar 14, 1:56 pm, "Jeff_p" <jeff.pr...@gmail.com> wrote:
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
I put a new one in a 95 Yj just last week. The shaft is telescoping
in the middle but it is hard to move. You will probably need to take
it out to get enough force on it to lengthen it. Also, the only way
to increase the distance between steering gear and steering column is
to move your steering wheel (and column) farther back into the drivers
seating area.
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
I put a new one in a 95 Yj just last week. The shaft is telescoping
in the middle but it is hard to move. You will probably need to take
it out to get enough force on it to lengthen it. Also, the only way
to increase the distance between steering gear and steering column is
to move your steering wheel (and column) farther back into the drivers
seating area.
03-14-2007, 06:32 PM
#7
Guest
Posts: n/a
Re: Steering Shaft adjustment
On Mar 14, 1:56 pm, "Jeff_p" <jeff.pr...@gmail.com> wrote:
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
I put a new one in a 95 Yj just last week. The shaft is telescoping
in the middle but it is hard to move. You will probably need to take
it out to get enough force on it to lengthen it. Also, the only way
to increase the distance between steering gear and steering column is
to move your steering wheel (and column) farther back into the drivers
seating area.
> Hi All,
>
> Last weekend I removed the 3" body lift on my 99 Wrangler that the
> previous owner put on. I'm noticing a problem with the steering shaft
> now. I am getting rubbing on the fender from the bottom U-Joint.
> Plus the U-joint has got a pretty good angle to it now. Does anyonw
> know how to adjust the length of the steering shaft to reduce the
> angle?
>
> Thanks in advance.
I put a new one in a 95 Yj just last week. The shaft is telescoping
in the middle but it is hard to move. You will probably need to take
it out to get enough force on it to lengthen it. Also, the only way
to increase the distance between steering gear and steering column is
to move your steering wheel (and column) farther back into the drivers
seating area.
Thread
Thread Starter
Forum
Replies
Last Post
MStevens003
Jeep Mailing List
9
03-25-2007 08:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)